Laser cutting is the most flexible way to process sheet metal, and in metal the fiber laser is now the standard. The beam does the work: no tool contact, no wear, no mechanical force on the part. KNUT...
High-performance control, production planning, office software
Cutting head
Autofocus, quick protective glass change
Autofocus, collision protection, height control
Autofocus, collision protection, height control
High-performance head with sensor, re-cut function
Table
Table pulls out by hand
Motorized pull-out table, carries up to 2,205 lb
Shuttle table: load while cutting
Shuttle table for heavy sheets
Extraction
+Extraction unit
Extraction unit
Extraction unit
Larger extraction unit
Gas
Automatic gas pressure
+Pressure reducer, compressed air dryer
Automatic gas pressure
+Pressure reducer, compressed air dryer
Automatic gas console
+Pressure reducer, compressed air dryer
Automatic gas pressure
+Pressure reducer, compressed air dryer
Protection
Laser safety enclosure with viewing window, chiller
Central lubrication (Compact ST, R, PRO)
FAQ's
What is a fiber laser cutting machine and what is it used for?
A fiber laser cutting machine cuts sheet metal with a focused beam. The beam melts a narrow kerf and assist gas clears the melt out of the cut. Since nothing touches the material, small holes, tight radii and detailed contours come off the table clean and to size. Shops use the process anywhere flat stock becomes a part: contract manufacturing, machine building, truck and trailer work, electrical enclosures and medical devices.
What is the difference between a fiber laser cutting machine and a laser cutting system?
Nothing. The terms describe the same equipment. "Laser cutting system" usually means the complete installation with gas console and fume extraction, and "laser cutter" is shop shorthand for the same machine. Compare the specifications, not the labels.
Which fiber laser cutting machine suits my shop?
Five things drive the answer: your largest plate size, your heaviest material, the alloys you run, parts per day, and the floor space and electrical service you have available. For cut to size work, prototypes and maintenance, a compact machine covers it. If you run full size sheet daily, a shuttle table returns the most. For heavy plate and tight cycle times, you are in the high power class. We will walk your part mix with you and match the power rating to it.
Fiber laser or CO2 laser: which technology is right for a laser cutting machine?
In metal, fiber wins. Better wall plug efficiency, nothing consumed to make the beam, faster through thin and medium material, and no mirrors in the beam path to align or replace. CO2 keeps its place with non-metals, meaning wood, acrylic and textiles. Every KNUTH machine in this category runs a fiber source and is set up for metal only.
Which materials and thicknesses can a fiber laser cutting machine cut?
Mild steel, stainless and aluminum are the core, with more alloys in reach depending on the machine and its power rating. Thin material and electrical steel are where fiber is strongest, because it moves fast and leaves little heat behind, so parts stay flat. Thickness capacity climbs with laser power. Assist gas is part of the decision: oxygen keeps cost down on heavier mild steel, nitrogen leaves an oxide free edge on stainless and aluminum.
How is a CNC fiber laser cutting machine controlled and programmed?
There is no manual version of this machine, it is CNC from the ground up. The contouring control drives the head and trims feed rate, power, gas pressure and focus height together as the geometry changes. Programming happens in nesting software: geometry comes in from CAD, the software arranges parts on the sheet to hold scrap down, then posts the cutting program. Parameter sets for common material and thickness combinations are already stored, so setup does not start with a round of trial cuts.
How can a fiber laser cutting machine be automated?
Start with the shuttle table. One table is unloaded and reloaded while the beam keeps running on the other, and that attacks material handling, which is what usually limits output rather than cut speed. On the large format series the shuttle table is standard, not an option. After that come loading and unloading systems and tower storage for lights out running. Whether the volume justifies it is a calculation we run with you.
Which testing standards does a KNUTH fiber laser cutting machine meet, and how is fume extraction handled?
Every machine is built and tested to European testing standards and inspected with documentation before it ships. We provide that documentation on request. Cutting metal generates smoke and fine particulate, so an extraction and filter unit ships with the larger series. Requirements that apply at your facility we go through with you during installation.
New or used fiber laser cutting machine: which is more economical?
Look at total cost, not the sticker. Older used machines are often CO2, which means more power drawn, laser gas consumed and more work on the optics. Those operating costs tend to close the gap on a lower purchase price over the life of the machine. Parts availability and documentation are the other question mark on a used machine. KNUTH ships new machines with a fiber source, documented inspection and parts support.
How quickly is a fiber laser cutting machine available, and how are service and consumables handled?
The lead time on a laser cutting machine depends on machine size and configuration, and we state it bindingly in the quotation. Installation, commissioning and operator training are available on request, with the scope set out in the quotation. Our own service network looks after the machines afterwards, with engineers who travel to site. Spare parts supply is guaranteed for 10 years for every machine. Wear parts such as cutting nozzles, protective glasses and filter elements are permanently in the accessories programme.
Fiber Laser Cutting Machines for Sheet Metal Fabrication
A fiber laser cutting machine cuts sheet metal with a focused beam instead of a tool. The beam melts a narrow kerf, and assist gas clears the melt out of the cut. Nothing touches the plate, so nothing wears. Small holes and tight radii come off the table ready to use. Shops also call these machines fiber laser cutting systems. KNUTH offers CNC fiber lasers in several table sizes and power ratings, from a compact unit that fits into a job shop to a high power system built for full size plate.
Fiber Laser or CO2 Laser: Which Technology Fits
In metal, fiber has taken over from CO2. Wall plug efficiency is far better. Nothing is consumed to make the beam itself, and with no mirrors in the beam path there is less to align and less to replace. Fiber is also quicker through thin and medium material, and it handles copper and brass, which were treated as problem materials on CO2 machines. Fiber does not cut non-metals: wood, acrylic and textiles stay with CO2. Every KNUTH machine in this category runs a fiber source and is set up for metal.
Table Sizes and Power Classes
Sizing runs along two axes, table format and laser power. The line splits into four steps:
Compact: a square table and a small floor footprint, built for job shops, prototype work, maintenance departments and short runs.
Standard format, extendable table: the everyday plate size, with a motorized extendable table, gas console and filter unit.
Shuttle table: same power range, second table added. One table gets unloaded and reloaded while the machine keeps cutting on the other.
High power: top power ratings for heavy plate and tight cycle times, in the biggest table formats.
Table dimensions, laser power and travels are listed per series in the machine overview above.
Materials, Material Thickness and Assist Gas
These machines are built for metal: mild steel, stainless and aluminum, with more alloys in reach depending on the machine and its power rating. Thin material and electrical steel are where fiber is strongest, since it moves fast and leaves little heat behind, so parts come off flat instead of warped. More laser power means more thickness capacity and less time per part. Three inputs drive the power class you need: the alloy, your heaviest material, and the edge quality your customer accepts. Assist gas belongs in the same math: oxygen keeps cost down on heavier mild steel, and nitrogen leaves an oxide free edge on stainless and aluminum.
CNC Control and Programming
A laser cutter has no manual version, it is a CNC machine from the ground up. The contouring control drives the head over the plate and trims feed rate, power, gas pressure and focus height together as the geometry changes. Programming happens in nesting software: you bring the geometry in from CAD, the software arranges parts on the sheet to hold scrap down, then posts the cutting program. Parameter sets for the usual material and thickness combinations are stored, so setup does not start with trial cuts. When people say CNC fiber laser cutting machine, this whole package is what they mean.
Automation: Shuttle Table, Loading and Fume Extraction
Cut time is usually not what limits output. Material handling is. That makes the shuttle table the first automation step worth paying for: one table is unloaded and reloaded while the beam is still running on the other. On the large format series it is standard equipment. Loading and unloading systems and tower storage go further, and whether the volume justifies them is a calculation we run with you. Cutting metal also generates smoke and fine particulate, and on the larger series an extraction and filter unit ships with the machine.
Applications and Industries
Fiber lasers show up anywhere flat stock turns into parts: contract manufacturing and sheet metal shops, machine builders, truck and trailer work, electrical enclosures, steel fabrication and medical device work. Cutting comes first, bending and welding follow. The machines for those steps sit under Sheet Metal Processing Machines, including Sheet Metal Press Brakes and Guillotine Shears. On heavy plate with simple contours, Industrial Plasma Cutting Machines often cost less per part. When tolerance matters more than speed and the material is already hardened, Wire EDM Machines are the right call.
Accessories and Consumables
Consumables are a running line item on any laser. Cutting nozzles and protective windows sit right in the process, and filter elements load up over time. We stock those parts permanently: Laser Cutting Consumables. Build them into your cost per part from day one, along with power and assist gas. Other shop and machine equipment is listed under Machine accessories.
Why KNUTH
KNUTH has been in the machine tool business for more than 100 years and serves North America through its own organization, with machines stocked at the Chicago warehouse. Every machine is quality-checked before delivery. We are a supplier, not a laser builder: we select the series and components, test them, and stand behind the machine with one point of contact.
Service, Spare Parts and Availability
Installation, startup and operator training are part of the delivery. After handover, the Americas service team and local partners cover the machine. Common spare parts ship from stock, and special items come straight from the manufacturers. Parts availability is guaranteed for 10 years on every machine. Lead time on a fiber laser depends on size and configuration, and the quote states it. Need a recommendation, or a quote to work from? Contact us by email or phone. We will go through table size, power class and automation with you.