Top cover for X.Mill/Vector 650-1000
Item No. 252819
Top cover for X.Mill/Vector 650-1000
Connection for 4th axis (wiring only and axis chart)
Item No. 253019
Connection for 4th axis (wiring only and axis chart)
Coolant flow through spindle, 30 bar, with filter system
Item No. 253369
Coolant flow through spindle, 30 bar, with filter system
Siemens Function: P17: Shopmill
Item No. 253377
Siemens Function: P17: Shopmill
Siemens Function: P25: 3D Simulation
Item No. 253378
Siemens Function: P25: 3D Simulation
With the 3D workpiece simulation, SINUMERIK offers you optimum help and security when programming and calculating quotations.
- Safety: 3-level view and solid model of the finished part, with zoom on details and free rotation of the viewing angle
- Support: - Simulation speed adjustable via override - Single block operation and start/stop possible at any time
- Control: Automatic calculation of the processing time
Siemens Function: P13: Residual Material Detection
Item No. 253379
Siemens Function: P13: Residual Material Detection
Contour areas that cannot be machined with large-diameter milling cutters are automatically recognised by the cycle for contour pockets and studs. These areas can be specifically reworked with a suitable smaller tool without having to machine the entire pocket or tenon again. If you want to mill several pockets and avoid unnecessary tool changes, it makes sense to clear out all pockets first and then remove the remaining material. In this case, you must specify the tool that was used to clear the pockets in the "Reference tool TR" parameter when clearing residual material.
- Shorter machining times by using a large tool for the main part of the machining and a smaller tool specifically for the remaining residual material
- Avoidance of empty cuts with extremely simple programming at the same time
Siemens Function: P22: Simulataneous Recording
Item No. 253380
Siemens Function: P22: Simulataneous Recording
While the workpiece is being machined, the tool paths can be drawn on the control unit screen in top view, 3-sided view and 3D view. The display and views of the workpiece correspond to the graphical simulation.
- Machining can also be monitored in a cluttered machine room
Oil skimmer
Item No. 253383
Oil skimmer
Chip flush-out system
Item No. 253384
Chip flush-out system
Dual-arm gripper with 24 tool stations, BT40
Item No. 253436
Dual-arm gripper with 24 tool stations, BT40
Spindle oil cooler
Item No. 253440
Spindle oil cooler
Ø125mm 4th axis (4th axis, servo motor, driver, air brakes)(Si)
Item No. 253604
Ø125mm 4th axis (4th axis, servo motor, driver, air brakes)(Si)
Ø170mm 4th axis (4th axis, servo motor, driver, air brakes)(Si)
Item No. 253605
Ø170mm 4th axis (4th axis, servo motor, driver, air brakes)(Si)
Ø210mm 4th axis (4th axis, servo motor, driver, air brakes)(Si)
Item No. 253606
Ø210mm 4th axis (4th axis, servo motor, driver, air brakes)(Si)
Ø250mm 4th axis (4th axis, servo motor, driver, air brakes)(Si)
Item No. 253607
Ø250mm 4th axis (4th axis, servo motor, driver, air brakes)(Si)
Spindle speed upgrade 10,000 to 12,000 rpm (belt type)
Item No. 253609
Spindle speed upgrade 10,000 to 12,000 rpm (belt type)
Spindle speed upgrade to 12,000 rpm direct drive without CTS
Item No. 253610
Spindle speed upgrade to 12,000 rpm direct drive without CTS
Upgrade ATC from 24 to 30 tools (BT40)
Item No. 253611
Upgrade ATC from 24 to 30 tools (BT40)
Upgrade: from worm-gear chip conveyor to chain-drive chip conveyor
Item No. 253612
Upgrade: from worm-gear chip conveyor to chain-drive chip conveyor
Manual tailstock ST-125T for rotary table
Item No. 253617
Manual tailstock ST-125T for rotary table
Manual tailstock ST-170T for rotary table
Item No. 253618
Manual tailstock ST-170T for rotary table
Manual tailstock ST-255T for rotary table
Item No. 253620
Manual tailstock ST-255T for rotary table
Manual chuck, 5'', for rotary table
Item No. 253621
Manual chuck, 5'', for rotary table
Manual chuck, 6'', for rotary table
Item No. 253622
Manual chuck, 6'', for rotary table
Manual chuck, 9'', for rotary table
Item No. 253624
Manual chuck, 9'', for rotary table
Preparatioon for CTS Setup
Item No. 253626
Preparatioon for CTS Setup
Coolant flow through spindle, 290 psi, with filter system
Item No. 253627
Coolant flow through spindle, 290 psi, with filter system
Upgrade from 10.4" to 15" Touchscreen (Si) for Vector
Item No. 253674
Upgrade from 10.4" to 15" Touchscreen (Si) for Vector
For the two variants Sinumerik 828D and Sinumerik 828D Advanced, Siemens is also offering a capacitive touch display with a 15.6-inch screen diagonal for the first time with the Panel Processing Unit (PPU) 290. The touch display can be operated using single-touch gestures.
According to Siemens, the full QWERTY keyboard integrated into the housing below the screen enables fast input, for example for programming CNC tasks. The wider 16:9 screen with a resolution of 1366 x 678 pixels offers more space for detailed displays. This makes the 15.6-inch display particularly suitable for displaying two channels, for example during turning and grinding, on the Sinumerik 828D Advanced.
Air through spindle
Item No. 253782
Air through spindle
Spindle upgrade from ST40 to BBT40 for X.Mill/Vector 650-1000
Item No. 253951
Spindle upgrade from ST40 to BBT40 for X.Mill/Vector 650-1000
(Wasbek) Renishaw OMP40-2T Workpiece Scanning Probe (ST 40)
Item No. 253288
(Wasbek) Renishaw OMP40-2T Workpiece Scanning Probe (ST 40)
The ultra-compact OMP40-2 (40 mm diameter) touch-trigger probe with optical transmission provides a flexible probing solution. The OMP40 is suitable for small to medium machining centres.
- Testing and setting up workpieces on machining centres
- Proven kinematic design
- Exceptional resistance to light interference with modulated transmission
- 360° transmission envelope
- 1.00 µm 2σ repeatability
(Wasbek) Renishaw SET OMP40-2T Scanning Probe + OTS Toolsetter (ST 40)
Item No. 254026
(Wasbek) Renishaw SET OMP40-2T Scanning Probe + OTS Toolsetter (ST 40)
The ultra-compact OMP40-2 (40 mm diameter) touch-trigger probe with optical transmission provides a flexible probing solution. The OMP40 is suitable for small to medium machining centres.
The OTS 3D touch-trigger tool setter with optical signal transmission can be used for on a wide range of tools on small to medium machining centres. It is compatible with Renishaw optical modulated receivers and can be used as part of a twin probe system. The robust and cable-free design allows freedom of table movement, ideal for twin pallet or rotary table machines.
- Testing and setting up workpieces on machining centres (OMP)
- Tool measurement and breakage detection on machining centres (OTS)
- Proven kinematic design
- Exceptional resistance to light interference with modulated transmission
- 360° transmission envelope
- Directionally adjustable optical infrared module (OTS)
- Cable-free for unrestricted machine movement and easy installation
- 1.00 µm 2σ repeatability
(Wasbek) Renishaw OTS Toolsetter
Item No. 254285
(Wasbek) Renishaw OTS Toolsetter
The OTS 3D touch-trigger tool setter with optical signal transmission can be used for on a wide range of tools on small to medium machining centres. It is compatible with Renishaw optical modulated receivers and can be used as part of a twin probe system. The robust and cable-free design allows freedom of table movement, ideal for twin pallet or rotary table machines.
- Tool measurement and breakage detection on machining centres
- Proven kinematic design
- Exceptional resistance to light interference with modulated transmission
- Direction-adjustable infrared optical module
- Cable-free for unrestricted machine movement and ease of installation
- 1.00 µm 2σ repeatability