Turnado 230/1500 PRO - Top model of the Turnado series with infinitely variable spindle speed and constant cutting speed, as well as rapid traverse and modern ergonomic design
The extensive features of the X.Pos Position Indicator are complemented with a digital speed indicator and an easy to program auxiliary function

The extensive features of the X.Pos Position Indicator are complemented with a digital speed indicator and an easy to program auxiliary function

The tailstock can be repositioning for conical turning

The tailstock can be repositioning for conical turning

Support moves in linear and cross direction via motorized rapid feed for reduced down-time

Support moves in linear and cross direction via motorized rapid feed for reduced down-time

Turnado 230/1500 PRO - Top model of the Turnado series with infinitely variable spindle speed and constant cutting speed, as well as rapid traverse and modern ergonomic design
The extensive features of the X.Pos Position Indicator are complemented with a digital speed indicator and an easy to program auxiliary function
The tailstock can be repositioning for conical turning
Support moves in linear and cross direction via motorized rapid feed for reduced down-time

ENGINE LATHE

Turnado 230/1500 PRO

Item No. 320563
Turning-Ø over bed
18 in
Center width
59.06 in
Spindle bore
2.3 in
Motor rating main drive
10.1 Hp
  • Included: 3-axis position indicator, X.pos 3.2 VC, Quick-change tool holder head WB, Quick change tool holder WBD 25120 all 20 items
Call

Free and without obligation. You will receive price and delivery time by email.

Data sheet (PDF)

Your KNUTH advisory team
Questions about accessories or installation?

Working Area
Center width 59.06 in
Center height 9 in
Turning-Ø over bed 18 in
Turning diameter over gap bridge 27 in
Turning-Ø over support 11 in
Gap bridge length 6 in
Bed width 12 in
Travels
Travel X-axis 11.2 in
Travel Z1-axis 5 in
Swing range of top slide ± 52°
Headstock
Speed range, low 30 rpm - 600 rpm
Speed range, high 600 rpm - 2,300 rpm
Spindle bore 2.3 in
Spindle mount Camlock D1-6
Spindle taper 6 MT
Feed
Feed X-axis 0.00098 in/R - 0.05449 in/R
Feed Z-axis 0.00217 in/R - 0.12051 in/R
Threading
Threading, metric 0.1 mm - 14 mm
Threading, diametric (50) 4-112 DP
Threading, module 0.1 mm - 7 mm
Threading, whitworth (60) 2-112 TPI
Tailstock
Tailstock quill diameter 2 in
Tailstock taper MT 4
Tailstock quill stroke 5 in
Tailstock traverse adjustment ± 0.51 in
Drive Capacity
Motor rating main drive 10.1 Hp
Measures and Weights
Overall dimensions (length x width x height) 109 in x 43 in x 62 in
Weight 4,334 lbs

The machines of the Turnado PRO series are the modern version of the classic lathe. The PRO models are the latest generation of our universal lathes, which have been tried and tested for 20 years. With constant cutting speed, rapid traverses and an extended speed range that can be controlled by an inverter, these models are characterized by high-performance machining, excellent surface quality and time efficiency. They are easy to recognize by the new ergonomic cladding design, which integrates all functions into an overall concept.

  • Infinitely variable speed range
  • Support with rapid feed motor
  • Extensive standard equipment
  • Constant cutting speed

  • With a new support, rapid feed and a modern ergonomic machine frame, the Turnado Lathe PRO series continues its success story
  • A heavily ribbed machine bed, rigid headstock and a massive one-piece cast-iron stand form a solid machine base
  • Removable bridge allows machining of short workpieces with large diameters
  • Back-gearing and an advanced electronic control technology of the powerful main spindle drive ensure high torque and a wide range of speeds
  • High-precision pre-loaded spindle bearings ensure superior concentricity and load capacity
  • All guides are adjustable
  • Gears, transmission shafts, and guideways are hardened and ground to guarantee quiet operation and long tool life
  • The apron runs in an oil bath for low maintenance and high reliability
  • A central lubrication system inside the support supplies all guideways with lubrication and simplifies maintenance
  • Micrometer bed stop ensures high repeatability on the Z-axis
  • The tailstock can be adjusted sideways for taper turning
  • The extensive features of the X.Pos Position Indicator are complemented here with a digital speed indicator and an easy to program auxiliary function
  • Constant cutting speed: during face turning, the spindle speed automatically adapts to the changing workpiece diameter – the constant cutting speed at the cutting edge of the turning tool ensures superior turning results with quality comparable to CNC lathes

3-axis position indicator, X.pos 3.2 VC Item No.
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • Optical Scales: 5 μm resolution (0.000197") with outside cover from aluminum for protection against oil, coolant and chips

Basic Functions

  • Resolution of 0.000197"
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function

Constant cutting speed

  • Allows you to have constant cutting speed during - the spindle speed automatically adjusts based on the turning diameter
3-axis position indicator, X.pos 3.2 VC
3-axis position indicator, X.pos 3.2 VC Item No.
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • Optical Scales: 5 μm resolution (0.000197") with outside cover from aluminum for protection against oil, coolant and chips

Basic Functions

  • Resolution of 0.000197"
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function

Constant cutting speed

  • Allows you to have constant cutting speed during - the spindle speed automatically adjusts based on the turning diameter
Quick-change tool holder head WB
Quick-change tool holder head WB Item No.

High quality quick change tool holder to easily switch the tools with a repeat accuracy of 0.0004 in.

Quick change tool holder WBD 25120
Quick change tool holder WBD 25120 Item No.
Rapid feed
Rapid feed Item No.
3-jaw chuck (10" diam.)
3-jaw chuck (10" diam.) Item No.
  • self-centering 3 jaw chuck
  • size of Ø 9.8 in
  • made of cast iron
  • delivered with one set of hard jaws
4-jaw face plate chuck (12" diam.)
4-jaw face plate chuck (12" diam.) Item No.
  • independent 4 jaw chuck 
  • size of Ø 11.8 in
  • made of cast iron
  • delivered with one set of hard jaws
Face plate (13" diam.)
Face plate (13" diam.) Item No.

Face plate diam. Ø13.7 in

Follow and steady rests
Follow and steady rests Item No.
Coolant system
Coolant system Item No.
Micrometer longitudinal stop
Micrometer longitudinal stop Item No.
Thread gauge
Thread gauge Item No.
Reducing sleeve
Reducing sleeve Item No.
Dead center
Dead center Item No.
Traveling cover for the toolpost
Traveling cover for the toolpost Item No.
Chuck guard
Chuck guard Item No.
Foot brake pedal
Foot brake pedal Item No.
Fixed splash guard (wall)
Fixed splash guard (wall) Item No.
Work light
Work light Item No.
Tool kit
Tool kit Item No.
Operating manual
Operating manual Item No.

3-axis position indicator, X.pos 3.2 VC

  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • Optical Scales: 5 μm resolution (0.000197") with outside cover from aluminum for protection against oil, coolant and chips

Basic Functions

  • Resolution of 0.000197"
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function

Constant cutting speed

  • Allows you to have constant cutting speed during - the spindle speed automatically adjusts based on the turning diameter

Resources & Downloads

Matching Accessories

Discover matching accessories for this machine.

Similar Products

Not sure which machine fits?

Our experts advise you free of charge on selection, equipment and accessories.

+1-847-415-3333

Request a quote

Turnado 230/1500 PRO - Top model of the Turnado series with infinitely variable spindle speed and constant cutting speed, as well as rapid traverse and modern ergonomic design
Turnado 230/1500 PRO
Item No. 320563

You will receive price and delivery time by email. If we have questions about the equipment, we will call you first. Prefer to talk right away? +1-847-415-3333

Only for questions about your request.
For example required equipment or workpiece.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. You will receive price and delivery time by email. If we have questions, we will call you first.
  3. No email? Please check your spam folder.

In a hurry? Call us: +1-847-415-3333

Something went wrong

Please refresh the page and try submitting the form again.

Call

Request a Consultation

Our advisory team will get back to you personally on the same business day. Free and without obligation. Prefer to talk right away? +1-847-415-3333

Only for questions about your request.
For example machine, workpiece or material.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. An advisor will call you, usually on the same business day.
  3. No email? Please check your spam folder.

In a hurry? Call us: +1-847-415-3333

Something went wrong

Please refresh the page and try submitting the form again.