Horizontal Miter Cutting Bandsaws

A horizontal miter cutting bandsaw is the workhorse of any fab shop that cuts structural steel, tube, angle and profile to length and to angle.

read more

A horizontal miter cutting bandsaw is the workhorse of any fab shop that cuts structural steel, tube, angle and profile to length and to angle. Because the head is horizontal, the blade stays supporte...

read more
Call: +1-847-415-3333

Your KNUTH advisory team
Personal reply on the same working day.

  • Family-run since 1923Machine tools worldwide
  • Every machine testedbefore delivery
  • Machines in stockready in Chicago & Houston
  • Own service teamtechnicians in the USA

Not sure which machine fits?

Our experts advise you free of charge on selection, equipment and accessories.

+1-847-415-3333

FAQ's

It cuts bar, tube, profile and structural beam to length at any set miter angle, or square when you need it. You will find it in fab shops, structural steel work, vehicle and equipment build, and repeat production.

Start with what you cut, your volume and how much you want automated. Repair and short runs suit a manual or semi-automatic saw, while steady production leans toward a bar-fed automatic with NC. We help you size it.

Yes. Each saw ships built and documented to European testing standards. The US market carries no CE mark requirement, and documentation is available on request.

Yes. Manual and semi-automatic saws are straightforward to run and fit metalworking training well. Shops that grow into volume can step up to an automated machine later.

Service is Americas-based, common parts ship from the US warehouse, and a ten-year parts availability guarantee stands behind every machine.

A single-miter saw angles one direction. A double-miter saw swings both ways, so you stop re-clamping when angles alternate, which pays off in frame and profile production.

It depends on the model, and many swing well past square while double-miter machines cut both directions. The exact range is on each machine's spec sheet.

A manual saw is run by hand. A semi-automatic uses hydraulic head feed and clamping. A fully automatic bar-feeds the stock itself, which is what you want for volume.

Carbon steel, stainless and non-ferrous alloys, in solid, tube or profile form. The right blade, with tooth pitch matched to the material, is what protects cut quality and blade life.

KNUTH USA stocks blades across a range of tooth pitches plus roller conveyors for feeding and offloading long stock. Blade choice follows the material and section, and conveyors keep cut lengths repeatable.

Machine types and how they are built

Not every miter bandsaw is built the same way, and the frame decides how heavy a cut it will take. KNUTH USA stocks the three configurations you see on most shop floors.

The other choice is single versus double miter. A single-miter machine angles one way only. A double-miter machine swings both directions, which keeps you from re-clamping every time the angle flips.

Angle cutting and where these saws earn their keep

An angle, or miter, cut takes the workpiece off square at whatever setting you dial in. Shops rely on it for frames, weldments, tube assemblies and any joint where two profiles meet. Common stock runs from round and square tube to angle iron, channel, structural beam and solid bar in carbon steel, stainless and non-ferrous alloys. How far the head swings varies by model, and many machines miter to both sides.

From hand-fed saws to bar-fed automatics

Pick the automation level to match your throughput, not the other way around.

  1. Manual: the operator runs the cut by hand, which suits single parts, repair and mixed work.
  2. Semi-automatic: hydraulics drive the head down and clamp the stock while the operator loads and cycles.
  3. Fully automatic: a bar feed indexes material on its own for repeat lengths in volume.
  4. NC control: at the top end the saw runs length, count and cut sequence from a program. There is no full CNC miter bandsaw in the lineup.

Matching the saw to your work

What you cut, how many and how much you want automated should drive the pick. Repair and short-run work get by on a manual or semi-automatic saw, while repeat production to tight length tolerance justifies a bar-fed automatic with NC. Cutting mostly square with no angle? Look at the horizontal straight cutting bandsaws instead. For internal cutouts and contours you want vertical bandsaws, and for burr-free cuts in solid stock the circular sawing machines.

Blades, tooling and material handling

Nothing drives cut quality and blade life like the blade itself, so the tooth pitch and blade type get matched to the alloy and the section you run. KNUTH USA supplies the blades and accessories to go with the saw. On long stock, roller conveyors handle infeed and outfeed and hold length repeatable across a run.

Why buyers choose KNUTH

KNUTH is a machine tool supplier that inspects its machines and stocks them for the Americas out of a warehouse near Chicago. The pitch is simple: European build quality without the European sticker, sizing help up front, and service handled from within the Americas.

Service, parts and lead time

Uptime rides on parts and support, so KNUTH USA runs Americas-based service and pulls common parts from the US warehouse, with specialty items coming straight from the makers. A ten-year parts availability guarantee stands behind every machine. Send us your material range, the automation you are after and your batch size, and you will hear back on any business day with a recommendation. Request a quote.

Request a quote

Item No.

You will receive price and delivery time by email. If we have questions about the equipment, we will call you first. Prefer to talk right away? +1-847-415-3333

Only for questions about your request.
For example required equipment or workpiece.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. You will receive price and delivery time by email. If we have questions, we will call you first.
  3. No email? Please check your spam folder.

In a hurry? Call us: +1-847-415-3333

Something went wrong

Please refresh the page and try submitting the form again.

Call

Request a Consultation

Our advisory team will get back to you personally on the same business day. Free and without obligation. Prefer to talk right away? +1-847-415-3333

Only for questions about your request.
For example machine, workpiece or material.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. An advisor will call you, usually on the same business day.
  3. No email? Please check your spam folder.

In a hurry? Call us: +1-847-415-3333

Something went wrong

Please refresh the page and try submitting the form again.