Sinus 330/2000 D - Classic design with extensive standard equipment, including 3 axis read out
Sinus 330/2000 D - Classic design with extensive standard equipment, including 3 axis read out

ENGINE LATHE

Sinus 330/2000 D

Item No. 490008
Turning diameter over bed
26 in
Workpiece length (max.)
79 in
Spindle bore
4.1 in
Motor rating main drive
10.1 Hp
  • Included: 3-jaw chuck Ø 12 inch, Operating manual, Dead center all 14 items
Call

Free and without obligation. You will receive price and delivery time by email.

Data sheet (PDF)

Your KNUTH advisory team
Questions about accessories or installation?

Working Area
Workpiece length (max.) 79 in
Turning diameter over bed 26 in
Turning-Ø over support 17 in
Turning diameter without gap bridge 35 in
Gap bridge length 13 in
Bed width 16 in
Travels
Travel X-axis 14.5 in
Travel Z1-axis 9 in
Swing range of top slide 45°
Headstock
Spindle speed 25 rpm - 1,600 rpm
Spindle bore 4.1 in
Spindle mount D1-8
Spindle taper 5 MT
Rapid Feed
Rapid feed X-axis 78.74 in/min
Rapid feed Z-axis 157.48 in/min
Feed
Feed X-axis 0.00087 in/R - 0.02913 in/R
Feed Z-axis 0.00173 in/R - 0.05827 in/R
Threading
Threading, metric 0.45 mm - 120 mm
Threading, diametric 0.88 DP - 160 DP
Threading, module 0.25 mm - 60 mm
Threading, whitworth (54) 7/16 - 80 TPI
Tailstock
Tailstock quill diameter 4 in
Tailstock taper 5 MT
Tailstock quill stroke 9 in
Tailstock traverse adjustment ± 12,5 in
Drive Capacity
Motor rating main drive 10.1 Hp
Measures and Weights
Overall dimensions (length x width x height) 147 in x 49 in x 63 in
Weight 6,380 lbs

Sinus D is the largest series in the universal lathes segment. The construction follows a classic design but is based on a heavy, one-piece cast machine bed. As with heavy-duty lathes, the frictional connection between the motor and the spindle takes place via a manual multi-disc clutch. With integrated functions such as the removable bed bridge, and rapid traverse, this series offers optional solutions for machining long workpieces or large flanges.

  • One-piece heavy-duty cast bed for increased rigidity
  • Sturdy headstock design with large spindle bearings
  • Rapid feed on 2 axes for fast positioning
  • Well-designed safety functions

  • Removable bridge for machining of large parts
  • High accuracy and low-noise operation even at high cutting power
  • Heavy and large bed
  • Hardened guide ways (>HB 400)
  • 4 inch spindle capacity for machining of large parts
  • Manual central lubrication
  • Clutch for soft startup with heavy parts
  • Automatic lubrication of headstock and main drive
  • Protected lead screw
  • Overload protection for feed shaft and lead screw
  • Support moves in linear and cross directions via rapid feed

3-jaw chuck Ø 12 inch Item No.
  • self-centering 3 jaw chuck
  • size of Ø 12 in
  • made of cast iron
  • delivered with one set of hard jaws
3-jaw chuck Ø 12 inch
3-jaw chuck Ø 12 inch Item No.
  • self-centering 3 jaw chuck
  • size of Ø 12 in
  • made of cast iron
  • delivered with one set of hard jaws
Operating manual
Operating manual Item No.
Dead center
Dead center Item No.
Chuck guard
Chuck guard Item No.

Chuck guard with integrated interlock system

Reducing sleeve
Reducing sleeve Item No.
Fixed splash guard (wall)
Fixed splash guard (wall) Item No.
Quick-change toolpost head WC
Quick-change toolpost head WC Item No.

High-quality German-type quick-change toolpost head for fast tool changes with a repeatability of 0,01 mm.

Quick change tool holder WCD 32150
Quick change tool holder WCD 32150 Item No.
  • Tool holder WCD 32150
  • Side 1.3 x 6 in
3-axis position indicator X.Pos 3.2
3-axis position indicator X.Pos 3.2 Item No.
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • Optical Scales: 5 μm resolution (0.000197") with outside cover from aluminum for protection against oil, coolant and chips

Basic Functions

  • Resolution of 0.000197"
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function
Tool kit
Tool kit Item No.
Coolant system
Coolant system Item No.
Steady and follow rests
Steady and follow rests Item No.
  • Steady rest - max. workpiece diameter: Ø200 mm
  • Follow rest - max. workkpiece diameter: Ø130 mm
LED work light
LED work light Item No.
Rapid feed on Z and X axes
Rapid feed on Z and X axes Item No.

3-axis position indicator X.Pos 3.2

  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • Optical Scales: 5 μm resolution (0.000197") with outside cover from aluminum for protection against oil, coolant and chips

Basic Functions

  • Resolution of 0.000197"
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function

Resources & Downloads

Similar Products

Not sure which machine fits?

Our experts advise you free of charge on selection, equipment and accessories.

+1-847-415-3333

Request a quote

Sinus 330/2000 D - Classic design with extensive standard equipment, including 3 axis read out
Sinus 330/2000 D
Item No. 490008

You will receive price and delivery time by email. If we have questions about the equipment, we will call you first. Prefer to talk right away? +1-847-415-3333

Only for questions about your request.
For example required equipment or workpiece.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. You will receive price and delivery time by email. If we have questions, we will call you first.
  3. No email? Please check your spam folder.

In a hurry? Call us: +1-847-415-3333

Something went wrong

Please refresh the page and try submitting the form again.

Call

Request a Consultation

Our advisory team will get back to you personally on the same business day. Free and without obligation. Prefer to talk right away? +1-847-415-3333

Only for questions about your request.
For example machine, workpiece or material.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. An advisor will call you, usually on the same business day.
  3. No email? Please check your spam folder.

In a hurry? Call us: +1-847-415-3333

Something went wrong

Please refresh the page and try submitting the form again.