HFS 50160 F NC - Moving column design with automated control of X and Z axes and Siemens HMI
HFS 50160 F NC - Moving column design with automated control of X and Z axes and Siemens HMI

HFS 50160 F NC

SKU : 124935

This series of surface grinders processes large and heavy workpieces with tolerances as required for precision surface grinding or for the preparatory processing step of lapping or polishing. The machine frame is designed in a cross-bed design with a movable column. This construction enables a long table guidance and thus the optimal introduction of weight force over the entire work area. The ability to switch between automatic or manual operation extends the scope for sample production, repair and training.

  • Moving column design for maximum stability
  • Magnetic clamping plate with built-in demagnetizing function
  • Siemens Smart Line PLC control with grinding cycles
  • NC-controlled Y/Z axes driven by servo motors
  • User-friendly HMI with touchscreen
  • Electronic handwheel for Y/Z axes
Working Area
Table dimensions 20 in x 63 in
Spindle center-to-table distance 24 in
Table load capacity (max.) 1980 lbs
Magnetic chuck height 4 in
Dimensions magnetic clamping plate 20 in x 31 in
Number of magnetic chucks 2 positions
Travels
Travel X-axis 63 in
Travel Y-axis 20 in
Feed
Hydr. feed X-axis 16.35 fpm - 81.75 fpm
Feed Y-axis 2 in/min - 20 in/min
Feed depth, Y-axis 0.000197 in - 0.001969 in
Feed Z-axis 2 in/min - 59 in/min
Automatic Z-axis feed 0 in/min - 1 in/min
Grinding wheel
Grinding wheels dimensions 14 in x 2 in x 5 in
Speed 1450 rpm
Drive Capacity
Motor rating main drive 10.1 Hp
Hydraulic motor rating 4 Hp
Y-axis servo motor 3 Hp
Z-axis servo motor 1 Hp
Measures and Weights
Overall dimensions (length x width x height) 237 in x 99 in x 107 in
Weight 13200 lbs

Surface Grinding Machine

  • The massive, heavily ribbed cross-bed machine frame with traversing column and horizontal spindle is extremely rigid even under heaviest workpiece loads
  • The large work area allows machining of single workpieces with large surface areas or machining of several workpieces in one setup
  • The workspace is protected by an easily accessible enclosure
  • A high-performance cooling system is included in the standard equipment of this series

Control

  • Grinding cycles for automatic face and groove grinding are accessible and editable via touchscreen
  • Preloaded ball screws and powerful servo-motors on Y and X ensure high precision and repeatability during grinding wheel feeds
  • An electronic hand-wheel for Y- and Z-axis simplifies setup and manual positioning of the grinding spindle
  • If set to Auto mode, the user-defined roughing and finishing parameters, number of spark-out strokes, and return to zero are automatically processed

Grinding spindle

  • Large grinding spindle, dynamically balanced, completely sealed with permanent lubrication
  • Preloaded precision-bearings ensure maximum grinding performance and high reliability over many production hours

Hydraulics

  • Superior quiet operation and low heat build-up ensure optimum work results in continuous operations
  • The hydraulic linear table feed is infinitely variable, maintains a constant speed with smooth travel direction reversals
  • The external hydraulics unit with oil cooler ensures perfect temperature stability

Magnetic clamping plate

  • Large magnetic chucks for torsion-free clamping across the entire work surface are included in the standard equipment
  • The modern control also ensures reliable operation with firm holding forces and high-grade degaussing

2-axis position indicator X.Pos 3.2 SKU:
2-axis position indicator X.Pos 3.2
2-axis position indicator X.Pos 3.2 SKU:
Electronic hand-wheel Y/Z axis
Electronic hand-wheel Y/Z axis SKU:
Grinding wheel flange
Grinding wheel flange SKU:
Workspace enclosure
Workspace enclosure SKU:
Coolant system
Coolant system SKU:
Grinding wheel dresser (without dressing diamond)
Grinding wheel dresser (without dressing diamond) SKU:
Balancing station
Balancing station SKU:
Balancing shaft
Balancing shaft SKU:
LED work lamp
LED work lamp SKU:
Magnetic clamping plate
Magnetic clamping plate SKU:
Adjustment screws
Adjustment screws SKU:
Operating tools
Operating tools SKU:
Operator manual
Operator manual SKU:
Siemens PLC with touchscreen
Siemens PLC with touchscreen SKU:
Grinding wheel
Grinding wheel SKU:
Automatic central lubrication
Automatic central lubrication SKU:

Resources & Downloads

Optional Accessories

Explore the range of compatible accessories in stock

Diamond Dressers Diamond Dresser Shank
SKU : 102877
Oil, Coolants and Lubricants Coolant Concentrate 5 Ltr.
SKU : 103184
Vises PSS 70 High-precision grinding and control vise
SKU : 128815
Vises PSK 100 High-precision grinding and control vise
SKU : 128824
Vises PSK 125 High-precision grinding and control vise
SKU : 128825
Vises Precision angle V-block
SKU : 128930
Vises Corrugated Parallel Parts 0.4-0.9 in
SKU : 128960
Vises Corrugated Parallels 1-1.5 in
SKU : 128961

Similar Products

HFS 80300 F NC - Moving column design with automated control of X and Z axes and Siemens HMI

HFS 80300 F NC

Travel X-axis: 118,1 in
Table dimensions: 31x118 in
HFS 50100 F NC - Moving column design with automated control of X and Z axes and Siemens HMI

HFS 50100 F NC

Travel X-axis: 39,4 in
Table dimensions: 20x39 in
HFS 60160 F NC - Moving column design with automated control of X and Z axes and Siemens HMI

HFS 60160 F NC

Travel X-axis: 63 in
Table dimensions: 24x63 in
HFS 60200 F NC - Moving column design with automated control of X and Z axes and Siemens HMI

HFS 60200 F NC

Travel X-axis: 86,6 in
Table dimensions: 24x87 in
HFS 80160 F NC - Moving column design with automated control of X and Z axes and Siemens HMI

HFS 80160 F NC

Travel X-axis: 63 in
Table dimensions: 31x63 in
HFS 80220 F NC - Moving column design with automated control of X and Z axes and Siemens HMI

HFS 80220 F NC

Travel X-axis: 86,6 in
Table dimensions: 31x87 in
consultation

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

HFS 50160 F NC - Moving column design with automated control of X and Z axes and Siemens HMI
HFS 50160 F NC
SKU : 124935
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Explore more machines Book a demo for this machine
Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a service

*
*
*
*
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our service representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.