UWF 3.2 - With universal type milling head, automatic feed on all axis, swiveling table and horizontal spindle
Vertical and horizontal spindle each have their separate drive

Vertical and horizontal spindle each have their separate drive

UWF 3.2 - With universal type milling head, automatic feed on all axis, swiveling table and horizontal spindle
Vertical and horizontal spindle each have their separate drive

UWF 3.2

SKU : 362695

The versatile universal milling machine complements the tried and tested UWF 3. Both models have the large work area, the universal milling head and the horizontal spindle in common. The new UWF 3.2. however has a slightly higher speed range and an infinitely variable servomotor feed, which extends its range of application. Together with the extensive equipment, this model is also ideally suited for repair workshops as well as training and production departments.

  • Universal cutter head swivels on 2 levels
  • Outer arbor support for horizontal milling
  • Swiveling milling table
  • Servo-feed on all axes with rapid feed
  • Extensive standard equipment
Working area
Table set up area 1370 mm x 320 mm
Table load capacity (max.) 260 kg
Number of T-slots 3 positions
T-slot (width x spacing) 14 mm x 80 mm
Milling table swivel range 45 deg
Travels
Travel X-axis 1000 mm
Travel Y-axis 360 mm
Travel Z-axis 400 mm
Vertical milling head
Spindle speed (vertical) 45 1/min - 1660 1/min
Spindle mount DIN 2080 / ISO 40
Throat 300 mm - 765 mm
Vertical spindle-to-table surface distance 260 mm - 660 mm
Milling head swivel range 360 deg
Rapid feed
Rapid feed X-/ Y-axis 1335 mm/min
Rapid feed Z-axis 1000 mm/min
Horizontal Milling Spindle
Spindle speed (horizontal) 35 1/min - 1500 1/min
Spindle mount ISO 40
Horizontal spindle-to-table surface distance 75 mm - 475 mm
Feed
Feed speed X-axis 30 mm/min - 830 mm/min
Feed speed Y-axis 30 mm/min - 830 mm/min
Feed speed Z-axis 23 mm/min - 625 mm/min
Drive capacity
Motor rating horizontal spindle 3 kW
Motor rating vertical spindle 3 kW
Measures and weights
Overall dimensions (length x width x height) 1,9 m x 1,75 m x 2 m
Weight 1950 kg

  • Extremely rigid machine bed made of high-strength HT-200 cast-iron with heavy ribbing
  • Large rectangular guideways ensure precision and quiet operation within permissible high loads
  • Precision-ground guideways with hardened surfaces for long-term accuracy and wear-resistance
  • The milling table features a large setup area and can be rotated in linear direction
  • Quiet, precision-made headstock gears with hardened and ground gears
  • Universal cutter head swivels on 2 planes - quick change-over from horizontal to vertical machining
  • By combining both swivel levels, almost any spatial angle can be set
  • Standard outer arbor support with bronze plain bearings accommodates long milling arbors in the horizontal spindle
  • Powerful servo-motor for infinite variation of feeds in all 3 axes
  • Minimum downtime due to rapid positioning of work table and rapid feeds in all axes
  • Control panel swivels for comfortable operation
  • Coolant system and chip tray are included

3-axis position indicator
collet chuck with collets (4,5,6,8,10,12,14,16 mm diam.)
horizontal arbor Ø 27 mm
outer arbor support for horizontal milling
chip tray
coolant system
central lubrication
M16 draw bar
LED work lamp
operating tools
operator instructions

ER 40 Collet Set 15 pcs.
ER 40 Collet Set 15 pcs. SKU: 106075
ER 40 Collet Set 15 pcs.
HS 125 Hydraulic Machine Vise SKU: 125024
HS 125 Hydraulic Machine Vise
  • Hardened and precision-ground jaws and body
  • High precision and wear-resistant material ensure long service-life
  • Clamping pressure is up to ten times as high as with conventional machine vises
  • Swivel-base mounted vise body, 360° swivel
  • Constant clamping pressure, unaffected by vibration and shock
  • Hydraulic power booster
Shell End Milling Arbor Ø22 SK 40 SKU: 103900
Shell End Milling Arbor Ø22 SK 40
  • For cutters with cross or longitudinal slot
  • Including parallel key, driver ring, cutter tightening screw, special wrench
  • Thread: M16
Swing Elements LK 5 SKU: 103331
Swing Elements LK 5
  • Damper elements absorb shock and vibration
  • Vibration-free machine operation
  • Set screws allow for easy machine alignment
Clamping Tool Set De Luxe 14/M12 SKU: 105295
Clamping Tool Set De Luxe 14/M12
  • 52 parts
  • In a convenient, sturdy steel magazine
  • 24 stud bolts, 4 each in the lengths 75, 100, 125, 150, 175, 200 mm
  • 4 extension nuts, 6 stepped clamps (3 pair), 6 T-slot nuts, 6 hexagon nuts flanged, step blocks (3 pairs)
Accessory-Set ISO 40 5-pc. SKU: 104596
Accessory-Set ISO 40 5-pc.
  • Incl. keyless drill chuck and drill chuck arbors
  • In wooden case

Content / Set:

  • Reducing sleeve: ISO 40 / MT 2
  • Reducing sleeve: ISO 40 /MT 3
  • Reducing sleeve: ISO 40 / MT 4
  • Tool holder bit: ISO 40 / B 18
  • Keyless drill chuck: 3-16 mm / B 18
ER 40 Collet Chuck / Mount ISO 40 SKU: 106062
ER 40 Collet Chuck / Mount ISO 40
  • Zum Spannen von Werkzeugen mit Zylinderschaft in ER-Spannzangen nach DIN 6499

Resources & Downloads

  • UWF 3.2 Brochure.pdf (0.25MB)

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

UWF 3.2 - With universal type milling head, automatic feed on all axis, swiveling table and horizontal spindle
UWF 3.2
SKU : 362695


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation



This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.