VHF 3.2 - With vertical type tilting head, automatic feed on all axes, horizontal axis, swiveling table
Precision-ground guideways with hardened surfaces for long-term accuracy and wear-resistance

Precision-ground guideways with hardened surfaces for long-term accuracy and wear-resistance

VHF 3.2 - With vertical type tilting head, automatic feed on all axes, horizontal axis, swiveling table
Precision-ground guideways with hardened surfaces for long-term accuracy and wear-resistance

VHF 3.2

SKU : 301411

The versatile universal milling machine complements the proven top model of the VHF series. The combination of horizontal spindle, swiveling vertical milling head and large clamping table, with an increased speed range and the infinitely variable servo feed, extend the wide range of applications of the VHF series. Together with the extensive equipment, this model is also ideally suited for milling in repair workshops as well as training and production departments.

  • Swiveling cutter head with quill feed
  • Horizontal spindle with its own drive
  • Swiveling milling table
  • Servo-motor for infinitely variable feed on all axes
  • Extensive standard equipment
Ready to ship
Working area
Table set up area 1370 mm x 320 mm
Table load capacity (max.) 300 kg
Number of T-slots 3 positions
T-slot (width x spacing) 14 mm x 80 mm
Milling table swivel range 45 deg
Travels
Travel X-axis 1000 mm
Travel Y-axis 360 mm
Travel Z-axis 400 mm
Vertical milling head
Spindle mount (vertical) ISO 40
Throat 178 mm - 868 mm
Vertical spindle-to-table surface distance 160 mm - 560 mm
Milling head swivel range 90 deg
Cutter head tilt angle 45 deg
Spindle speed (infinitely variable) (L) 70 1/min - 450 1/min
Spindle speed (infinitely variable) (H) 450 1/min - 3600 1/min
Rapid feed
Rapid feed X-/ Y-axis 1335 mm/min
Rapid feed Z-axis 1000 mm/min
Horizontal milling heada
Spindle speeds 35 1/min - 1500 1/min
Spindle mount ISO 40
Horizontal spindle-to-table surface distance 75 mm - 475 mm
Feed
Feed speed X-axis 30 mm/min - 830 mm/min
Feed speed Y-axis 30 mm/min - 830 mm/min
Feed speed Z-axis 23 mm/min - 625 mm/min
Drive capacity
Main drive motor rating (vertical) 3,7 kW
Main drive motor rating (horizontal) 3 kW
Measures and weights
Overall dimensions (length x width x height) 1,9 m x 1,75 m x 2,35 m
Weight 1950 kg

  • Extremely rigid machine bed made of high-strength HT-200 cast-iron with heavy ribbing
  • Quiet, precision-made headstock gears with hardened and ground gears
  • The milling table features a large setup area and can be rotated in linear direction
  • The cutter head quill features a 3-step automatic feed and automatic depth shut-off, but can also be moved manually
  • For angular bores, the vertical cutter head swivels in two directions: r + l ±90°; tilt fwd + rev ±45°
  • Spindle speed of vertical cutter head is infinitely variable over a wide speed range; an auxiliary gearbox ensures powerful torque
  • Vertical and horizontal spindle each have their separate drive
  • Standard outer arbor support with bronze plain bearings accommodates long milling arbors in the horizontal spindle
  • Powerful servo-motor allows infinite variation of feeds on all 3 axes
  • Minimum downtime due to rapid positioning of work table and rapid feeds in all axes
  • Control panel swivels for comfortable operation
  • Coolant system and chip tray are included

chip tray
coolant system
central lubrication
3-axis position indicator X.Pos 3.2
Operator instructions
M16 draw bar
operating tools
cutter arbor Ø 27 mm

ER 40 Collet Set 15 pcs.
  • 6 pcs: 6, 8, 10, 12, 16, 20 mm
ER 40 Collet Set 15 pcs. SKU: 106075
ER 40 Collet Set 15 pcs.
  • 6 pcs: 6, 8, 10, 12, 16, 20 mm
SKU: 125024
  • Hardened and precision-ground jaws and body
  • High precision and wear-resistant material ensure long service-life
  • Clamping pressure is up to ten times as high as with conventional machine vises
  • Swivel-base mounted vise body, 360° swivel
  • Constant clamping pressure, unaffected by vibration and shock
  • Hydraulic power booster
Shell End Milling Arbor Ø22 SK 40 SKU: 103900
Shell End Milling Arbor Ø22 SK 40
  • For cutters with cross or longitudinal slot
  • Including parallel key, driver ring, cutter tightening screw, special wrench
  • Thread: M16
Swing Elements LK 5 SKU: 103331
Swing Elements LK 5
  • Damper elements absorb shock and vibration
  • Vibration-free machine operation
  • Set screws allow for easy machine alignment
Clamping Tool Set De Luxe 14/M12 SKU: 105295
Clamping Tool Set De Luxe 14/M12
  • 52 parts
  • In a convenient, sturdy steel magazine
  • 24 stud bolts, 4 each in the lengths 75, 100, 125, 150, 175, 200 mm
  • 4 extension nuts, 6 stepped clamps (3 pair), 6 T-slot nuts, 6 hexagon nuts flanged, step blocks (3 pairs)
SKU: 104596
  • Incl. keyless drill chuck and drill chuck arbors
  • In wooden case

Content / Set:

  • Reducing sleeve: ISO 40 / MT 2
  • Reducing sleeve: ISO 40 /MT 3
  • Reducing sleeve: ISO 40 / MT 4
  • Tool holder bit: ISO 40 / B 18
  • Keyless drill chuck: 3-16 mm / B 18
Coolant Concentrate 5 Ltr. SKU: 103184
Coolant Concentrate 5 Ltr.
  • Improved chip flow, longer tool service life and better cut profile
  • For sawing, drilling, milling, turning of steel, cast-iron, stainless steel, non-ferrous and light metals
  • Dilute with water 1:20
  • 1 canister contains 5 Ltr.
Universal Facing / Lathe Bore Head ADA / SK40 SKU: 103404
Universal Facing / Lathe Bore Head ADA / SK40

Can be used on drill presses, lathes, milling machines, etc.

  • With self-actuated slide advance and automatic stop activation
  • Automatic advance ensures constant tool feed
  • Adjustable guides
  • Adjustable stops
  • Made of carbon-chromium-molybdenum steel
  • All parts are hardened and precision-ground
  • Guaranteed maximum accuracy
  • Incl. reducing sleeves 4, 8, 12 mm
Shell End Milling Arbor Ø16 SK 40 SKU: 103895
Shell End Milling Arbor Ø16 SK 40
  • For cutters with cross or longitudinal slot
  • Including parallel key, driver ring, cutter tightening screw, special wrench
  • Thread: M16
Shell End Milling Arbor Ø27 SK 40 SKU: 103905
Shell End Milling Arbor Ø27 SK 40
  • For cutters with cross or longitudinal slot
  • Including parallel key, driver ring, cutter tightening screw, special wrench
  • Thread: M16
Shell End Milling Arbor Ø32 SK 40 SKU: 103910
Shell End Milling Arbor Ø32 SK 40
  • For cutters with cross or longitudinal slot
  • Including parallel key, driver ring, cutter tightening screw, special wrench
  • Thread: M16
Shell End Milling Arbor Ø40 SK 40 SKU: 103915
Shell End Milling Arbor Ø40 SK 40
  • For cutters with cross or longitudinal slot
  • Including parallel key, driver ring, cutter tightening screw, special wrench
  • Thread: M16
SKU: 104920
  • Pull-down system: absolutely secure workpiece hold even during cutting of heavy parts
  • Hardened and precision-ground steel jaws
  • Dial turns 360° and has 1° scale division
  • Parallelism ± 0,03 mm / 100 mm
  • Precise, hardened jaw guides
  • Made of high-quality cast-iron
Swivel Hold-Down Clamp Set 100/M12 SKU: 105790
Swivel Hold-Down Clamp Set 100/M12
  • High quality steel, black-finished
  • Available in pairs only
ER 40 Collet Chuck / Mount ISO 40 SKU: 106062
ER 40 Collet Chuck / Mount ISO 40
  • For clamping tools with cylindrical shank in ER collets according to DIN 6499
Angle Collet Fixture (vertical + horizontal) SKU: 106090
Angle Collet Fixture (vertical + horizontal)
  • For 5C collets
  • Vertical and horizontal use with setup angle
5-C-Collet Clamp-Ø 1 mm SKU: 106103
5-C-Collet Clamp-Ø 1 mm
  • High quality steel hardened and precision-ground
  • Male and female thread
5-C-Collet Clamp-Ø 2 mm SKU: 106104
5-C-Collet Clamp-Ø 2 mm
  • High quality steel hardened and precision-ground
  • Male and female thread
5-C-Collet Clamp-Ø 3 mm SKU: 106105
5-C-Collet Clamp-Ø 3 mm
  • High quality steel hardened and precision-ground
  • Male and female thread
5-C-Collet Clamp-Ø 4 mm SKU: 106110
5-C-Collet Clamp-Ø 4 mm
  • High quality steel hardened and precision-ground
  • Male and female thread
5-C-Collet Clamp-Ø 25 mm SKU: 106215
5-C-Collet Clamp-Ø 25 mm
  • High quality steel hardened and precision-ground
  • Male and female thread
Edge Tracer Set SKU: 108057
Edge Tracer Set
  • 1-two-sided 10x10x4 / 2-single sided 10x10
  • 3-two-sided 10x10x4 / 4-single sided 10x4
  • 5-two-sided 12x12x4
Roughing End Mill Cutter 40 SKU: 108400
Roughing End Mill Cutter 40
  • With cross groove
  • Right-hand cut with right-hand spiral
  • HSS-E, hardness HRC 68
  • Roughing cut teeth
Roughing End Mill Cutter 50 SKU: 108401
Roughing End Mill Cutter 50
  • With cross groove
  • Right-hand cut with right-hand spiral
  • HSS-E, hardness HRC 68
  • Roughing cut teeth
Roughing End Mill Cutter 63 SKU: 108402
Roughing End Mill Cutter 63
  • With cross groove
  • Right-hand cut with right-hand spiral
  • HSS-E, hardness HRC 68
  • Roughing cut teeth
Roughing End Mill Cutter 80 SKU: 108403
Roughing End Mill Cutter 80
  • With cross groove
  • Right-hand cut with right-hand spiral
  • HSS-E, hardness HRC 68
  • Roughing cut teeth
End Milling Set HSS TiN SKU: 108440
End Milling Set HSS TiN

TiN-coated, 20 pieces

  • 2 - 5 times longer service life
  • Double cutting power
  • Improved part surface

DIN 327 D, short length

  • Designed with 2 cutting edges. Face teeth for centric cuts. For cutting keyways/grooves (P 9 fitting) and center cut-out. Vertical or side cutting possible, with cyl. shaft and side drive dog acc. to DIN 1835 B, 3, 4, 5, 6, 8, 10, 12, 14, 18, 20 mm

DIN 844 B, short length

  • Designed with 4 cutting edges with 30° right-hand spiral for excellent chip removal. Facing teeth for centric cuts. For normal to hard materials with cyl. shaft and side drive dogs DIN 1835 B, 3, 4, 5, 6, 8, 10, 12, 14, 18, 20 mm
Roughing Shank Cutter 10 pcs. SKU: 108445
Roughing Shank Cutter 10 pcs.

Set = 10 pieces

  • DIN 844 B, DIN 1835 B, Weldon shaft
  • HSS, ionized and therefore HRC 68
  • Right-hand cut
  • For materials up to 1000 N/mm2 strength
  • Diameter: 6, 8, 10, 12, 14, 16, 18, 20, 22, 25 mm
Lathe Bore Head with Boring Bar Set 75 mm 12 pcs. SKU: 108633
Lathe Bore Head with Boring Bar Set 75 mm 12 pcs.
  • For easy inside diameter turning on drill presses, lathes and milling machines
  • Micrometer screw for precise inside turning diameter adjustment
  • High quality steel hardened and precision-ground
  • Feed: 0.01 mm / division line
  • 2 vertical tool mounts, 1 horizontal tool mount
Mounting Shank for reaming head 50/75 mm EN ISO 40 SKU: 108637
Mounting Shank for reaming head 50/75 mm EN ISO 40
  • Mount with connection thread for reaming heads
  • With draw-in bolt thread for use on milling machines
  • Tapers are hardened and ground
  • The reaming head set is provided without mount
  • Shank with draw-in thread ISO 40
Assembly Stand MAS-BT40, SK 40 SKU: 108930
Assembly Stand MAS-BT40, SK 40
  • For milling and boring tool setup
  • Horizontal and vertical mount
  • Simplifies the setup and reduces the tooling time at the machine
Divider ST 130 SKU: 110960
Divider ST 130
  • Gear ratio 1:90, disengages for direct division, manual 360° rotation of chuck
  • Hand wheel with scale ring
  • Nonius division 10''
  • 6 masks for direct division of 2, 3, 4, 6, 8, 12, 24 parts
  • Hardened and ground teeth with 3-jaw chuck, 160 or 200 mm
Optional Accessory Set / ST 130 SKU: 110970
Optional Accessory Set / ST 130

Applications: Workpieces can be clamped between the divider and the tailstock for a horizontal workpiece alignment.

Upgrade to a Universal Divider

Dividing plate set for indirect dividing:

  • The spindle is positioned via dividing plates that have several concentric hole pattern
  • Using so-called shears (two pointers rotating around the crank shaft) simplifies positioning through several crank rotations, since counting between holes on the divider plate is not necessary
  • The user only has to count the number of full rotations
  • Benefit: Many divisions can be performed with only a few divider plates, higher accuracy is achieved by using a reduction worm gear, which causes a high-resolution continued rotation of the crank
Power Worker Metal Cutter SKU: 123040
Power Worker Metal Cutter
  • Universal, quick and mobile use even at limited access locations
  • Safe and clean working environment
  • Reduces risk of injuries caused by sharp metal edges
  • Recyclable due to separable material
  • Stainless steel enclosures and powerful permanent solenoids ensure a long tool life
  • Adjustable rod length
  • Compact dimensions: 368 - 593 mm long, Ø 25 mm
  • Low weight: 600 g
Rotary Table RT 200 SKU: 125835
Rotary Table RT 200
  • Completely enclosed design, prevents contamination from dirt and chips
  • Setup table rotates on a large ring-shaped box way
  • The very effective clamp pulls the setup table down straight, without any change of position or radial pressure and presses it against the guideway
  • For quick manual turning, the worm can be disengaged from the worm gear by pushing down the hand-lever
  • Setup table with 360° scale
  • The zero-backlash of worm and worm gear is adjustable
  • Hand wheel scale gradation 10''
  • Hand wheel can be replaced with indexing plate
  • With 4 radial setup T-slots (14 mm)
  • Very low profile
  • Guide slot in the vertical base plane
  • Can be used vertically

Accuracy (max. deviation):

  • Sface concentricity of work table setup surface 300 : 0.015
  • Concentricity of setup < = 0.015
  • Parallelism of setup to base surface 300 : 0.02
  • Concentricity of setup table taper bore < = 0.010
  • Parallelism of bore axis to vertical setup surface 0.03
  • Parallelism of bore axis to slot in the vertical setup surface 0.02
  • Parallelism between vertical setup area and conus taper connection axis - tailstock center 0.02
  • Parallelism between slot in the vertical setup surface and the connecting axis between centers 0.02
  • Division accuracy 45"
Corrugated Parallel Parts 9-23mm SKU: 128960
Corrugated Parallel Parts 9-23mm
  • Saves time when clamping parts for grinding, milling, drilling etc. ...
  • No chips are left on the supporting surface to ensure unaffected parallelism of the clamped workpiece
  • Multiple flat parts, or individual thin parts can be clamped
  • Hardened and tempered spring steel, 110 mm long parallelism ± 0.005 mm, precision-ground
  • 8 pair per set - 2 mm incrementing
Corrugated Parallels 25-39mm SKU: 128961
Corrugated Parallels 25-39mm
  • Saves time when clamping parts for grinding, milling, drilling etc. ...
  • No chips are left on the supporting surface to ensure unaffected parallelism of the clamped workpiece
  • Multiple flat parts, or individual thin parts can be clamped
  • Hardened and tempered spring steel, 110 mm long parallelism ± 0.005 mm, precision-ground
  • 8 pair per set - 2 mm incrementing

Resources & Downloads

  • VHF 3.2 Brochure.pdf (0.25MB)

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

VHF 3.2 - With vertical type tilting head, automatic feed on all axes, horizontal axis, swiveling table
VHF 3.2
SKU : 301411


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation



This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.