VHF 3 - With vertical type tilting head, automatic feed on all axes and horizontal axis
Horizontal milling spindle with outer arbor support for long milling arbors

Horizontal milling spindle with outer arbor support for long milling arbors

Cutter head swivels ± 45°

Cutter head swivels ± 45°

Automatic 3-step quill feed

Automatic 3-step quill feed

VHF 3 - With vertical type tilting head, automatic feed on all axes and horizontal axis
Horizontal milling spindle with outer arbor support for long milling arbors
Cutter head swivels ± 45°
Automatic 3-step quill feed

VHF 3

SKU : 301410

The VHF 3 is a universal milling machine that can keep pace with the growing demands of our customers even after a good 20 years in the KNUTH catalog. Equipped with a horizontal spindle, a swiveling vertical milling head and a large clamping table, this model serves a wide range of applications. The entire VHF series is ideal for repair shops, as well as training and production departments. The complete configuration with automatic feed and digital position display enables precise production and short non-productive times.

  • Solid construction for precision machining
  • Automatic work feeds on all axes to ensure best surface finish
  • Automatic rapid feeds on all axes to minimize downtime
  • Swiveling vertical head ± 45° for angle machining
  • Automatic quill feed for fast and accurate drilling
  • New generation DRO with milling functions
Working area
Table set up area 1320 mm x 320 mm
Table load capacity 300 kg
Number of T-slots 5 positions
Travels
Travel X-axis 1000 mm
Travel Y-axis 245 mm
Travel Z-axis 430 mm
Vertical milling head
Throat 200 mm - 540 mm
Spindle mount ISO 40
Quill stroke 120 mm
Spindle nose-to-table surface distance 140 mm - 540 mm
Spindle speeds-stages 8
Spindle speeds 90 1/min - 2000 1/min
Head swivel range ± 45°
Rapid feed
Rapid feed X-axis 1024 mm/min
Rapid feed Y-axis 1024 mm/min
Rapid feed Z-axis 670 mm/min
Horizontal milling heada
Spindle speeds-stages 12
Spindle speeds 40 1/min - 1300 1/min
Spindle mount ISO 40
Horizontal spindle-to-table surface distance 50 mm - 450 mm
Feed
Quill feeds (3) 0,08; 0,15; 0,25 mm/R
Feed speed X / Y axis-stages 8
Feed speed X / Y axis 20 mm/min - 360 mm/min
Drive capacity
Motor rating feed 0,55 kW
Motor rating coolant pump 0,09 kW
Motor rating horizontal spindle 2,2 kW
Motor rating vertical spindle 2,2 kW
Measures and weights
Overall dimensions (length x width x height) 1,71 m x 1,72 m x 2,33 m
Weight 1900 kg

  • All 3 axes with automatic feed and rapid feeds
  • Vertical head swivels ± 45°
  • Spindle speeds for horizontal and vertical spindle controlled by separate switch gears with oil-bath lubrication
  • Capstan-controlled quill feed for drilling, manual micro-feed for milling
  • For horizontal spindle operations, the top beam including head can be completely rotated on the stand
  • 3 automatic quill feeds
  • Adjustable ground dovetail guideways on the X-axis and wide square guideways on Y and Z-axis
  • Clamping device in all 3 axes
  • Adjustable stops for drilling depth and table adjustment

3-axis position indicator

  • More accuracy
  • Lower error rate
  • Increased productivity
  • Resulting in valuable time savings
  • For increased productivity
  • Easy to read display
  • Operator-specific features
  • Convenient keyboard layout
  • Resolution: 0.01/ 0.005 mm
  • Default coordinates
  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Calculator function
  • Storage for 10 tools
  • Radius / diameter toggle
  • Mm/inch conversion
  • Easy expansion and maintenance-free operation

3-axis position indicator
drill chuck 16 mm
cutter arbor Ø 27 mm
cutter arbor Ø 40 mm
collet chuck ISO 40 with collets Ø 4,5,6,8,10,12,14,16 mm
reducing sleeve ISO 40 / MT3 and ISO 40 / MT2
coolant system
chip tray
work lamp
operating tools
operator instructions

ER 32 Collet Set 6 pcs.
  • 6 pcs: 6, 8, 10, 12, 16, 20 mm
ER 32 Collet Set 6 pcs. SKU: 106052
ER 32 Collet Set 6 pcs.
  • 6 pcs: 6, 8, 10, 12, 16, 20 mm
Swing Elements LK 5 SKU: 103331
Swing Elements LK 5
  • Damper elements absorb shock and vibration
  • Vibration-free machine operation
  • Set screws allow for easy machine alignment
Adapter SK 40 / MT 2 SKU: 103720
Adapter SK 40 / MT 2
  • For tools with Morse taper shank and ISO mount
  • Hardened and ground
Adapter SK 40 / MT 4 SKU: 103740
Adapter SK 40 / MT 4
  • For tools with Morse taper shank and ISO mount
  • Wechselbare und exakt zentrierte Verbindung zwischen Werkzeugmaschine und Werkzeug
  • Einsetzbar in Fräsmaschinen, Bearbeitungszentren und Bohrwerke
  • Kegelschaft innen und außen geschliffen
  • Festen Sitz, hohe Wiederholgenauigkeit beim Werkzeugwechsel
Keyless Drill Chuck 1-13 mm B 16 SKU: 104765
Keyless Drill Chuck 1-13 mm B 16
  • Chucking range 1-13 mm
  • Mount B 16
Keyless Drill Chuck 3-16 mm B 18 SKU: 104770
Keyless Drill Chuck 3-16 mm B 18
  • Chucking range 3-16 mm
  • Mount B 18
Drill Chuck Arbors ISO 40 / B 16 SKU: 104780
Drill Chuck Arbors ISO 40 / B 16
  • Gehärtet und genau geschliffen für hohe Rundlaufgenauigkeit
  • Präzise Ausführung zur Aufnahme von Bohrfuttern Fräsmaschinen, Bearbeitungszentren und Vorrichtungen usw.
Drill Chuck Arbors ISO 40 / B 18 SKU: 104781
Drill Chuck Arbors ISO 40 / B 18
  • Gehärtet und genau geschliffen für hohe Rundlaufgenauigkeit
  • Präzise Ausführung zur Aufnahme von Bohrfuttern Fräsmaschinen, Bearbeitungszentren und Vorrichtungen usw.
Milling Chuck WELDON ISO 40 / Ø 6 mm SKU: 106801
Milling Chuck WELDON ISO 40 / Ø 6 mm
  • For tools with cylindrical shank and setup area in accordance with DIN 1835 B
  • Forged, case-hardened, precision-ground
Milling Chuck WELDON ISO 40 / Ø 8 mm SKU: 106802
Milling Chuck WELDON ISO 40 / Ø 8 mm
  • For tools with cylindrical shank and setup area in accordance with DIN 1835 B
  • Forged, case-hardened, precision-ground
Milling Chuck WELDON ISO 40 / Ø 10 mm SKU: 106803
Milling Chuck WELDON ISO 40 / Ø 10 mm
  • For tools with cylindrical shank and setup area in accordance with DIN 1835 B
  • Forged, case-hardened, precision-ground
Milling Chuck WELDON ISO 40 / Ø 12 mm SKU: 106804
Milling Chuck WELDON ISO 40 / Ø 12 mm
  • For tools with cylindrical shank and setup area in accordance with DIN 1835 B
  • Forged, case-hardened, precision-ground
Milling Chuck WELDON ISO 40 / Ø 16 mm SKU: 106805
Milling Chuck WELDON ISO 40 / Ø 16 mm
  • For tools with cylindrical shank and setup area in accordance with DIN 1835 B
  • Forged, case-hardened, precision-ground
Milling Chuck WELDON ISO 40 / Ø 20 mm SKU: 106806
Milling Chuck WELDON ISO 40 / Ø 20 mm
  • For tools with cylindrical shank and setup area in accordance with DIN 1835 B
  • Forged, case-hardened, precision-ground
Milling Chuck WELDON ISO 40 / Ø 25 mm SKU: 106807
Milling Chuck WELDON ISO 40 / Ø 25 mm
  • For tools with cylindrical shank and setup area in accordance with DIN 1835 B
  • Forged, case-hardened, precision-ground
Milling Chuck WELDON ISO 40 / Ø 32 mm SKU: 106808
Milling Chuck WELDON ISO 40 / Ø 32 mm
  • For tools with cylindrical shank and setup area in accordance with DIN 1835 B
  • Forged, case-hardened, precision-ground
Indexable Insert End Mills Set 25 mm SKU: 107800
Indexable Insert End Mills Set 25 mm
  • Shaft 19 mm, Weldon shaft with torque surface
  • With carbide tips, quality P20
Roughing End Mill Cutter 40 SKU: 108400
Roughing End Mill Cutter 40
  • With cross groove
  • Right-hand cut with right-hand spiral
  • HSS-E, hardness HRC 68
  • Roughing cut teeth
Roughing End Mill Cutter 50 SKU: 108401
Roughing End Mill Cutter 50
  • With cross groove
  • Right-hand cut with right-hand spiral
  • HSS-E, hardness HRC 68
  • Roughing cut teeth
Roughing End Mill Cutter 80 SKU: 108403
Roughing End Mill Cutter 80
  • With cross groove
  • Right-hand cut with right-hand spiral
  • HSS-E, hardness HRC 68
  • Roughing cut teeth
Lathe Bore Head with Boring Bar Set 50 mm 9 pcs. SKU: 108631
Lathe Bore Head with Boring Bar Set 50 mm 9 pcs.
  • For easy inside diameter turning on drill presses, lathes and milling machines
  • Micrometer screw for precise inside turning diameter adjustment
  • High quality steel hardened and precision-ground
  • Feed: 0.01 mm / division line
  • 2 vertical tool mounts, 1 horizontal tool mount
Lathe Bore Head with Boring Bar Set 75 mm 12 pcs. SKU: 108633
Lathe Bore Head with Boring Bar Set 75 mm 12 pcs.
  • For easy inside diameter turning on drill presses, lathes and milling machines
  • Micrometer screw for precise inside turning diameter adjustment
  • High quality steel hardened and precision-ground
  • Feed: 0.01 mm / division line
  • 2 vertical tool mounts, 1 horizontal tool mount
Corrugated Parallel Parts 9-23mm SKU: 128960
Corrugated Parallel Parts 9-23mm
  • Saves time when clamping parts for grinding, milling, drilling etc. ...
  • No chips are left on the supporting surface to ensure unaffected parallelism of the clamped workpiece
  • Multiple flat parts, or individual thin parts can be clamped
  • Hardened and tempered spring steel, 110 mm long parallelism ± 0.005 mm, precision-ground
  • 8 pair per set - 2 mm incrementing
Corrugated Parallels 25-39mm SKU: 128961
Corrugated Parallels 25-39mm
  • Saves time when clamping parts for grinding, milling, drilling etc. ...
  • No chips are left on the supporting surface to ensure unaffected parallelism of the clamped workpiece
  • Multiple flat parts, or individual thin parts can be clamped
  • Hardened and tempered spring steel, 110 mm long parallelism ± 0.005 mm, precision-ground
  • 8 pair per set - 2 mm incrementing
Adapter SK 40 / MT 3 SKU: 103730
Adapter SK 40 / MT 3
  • For tools with Morse taper shank and ISO mount
  • Hardened and ground
Mounting Shaft ISO 40 SKU: 108637
Mounting Shaft ISO 40
  • Aufnahme mit Anschlussgewinde für Ausdrehköpfe
  • Mit Anzugsgewinde, für den Einsatz an Fräsmaschinen geeignet
  • Kegel gehärtet und geschliffen
  • Das Ausbohrkopfset wird ohne Aufnahme geliefert
  • Schaft mit Anzuggewinde ISO 40
Dial for HNCS 130V SKU: 104933
Dial for HNCS 130V
ER 32 Collet Chuck / Mount ISO 40 SKU: 106056
ER 32 Collet Chuck / Mount ISO 40
  • Zum Spannen von Werkzeugen mit Zylinderschaft in ER-Spannzangen nach DIN 6499
ER 40 Collet Chuck / Mount ISO 40 SKU: 106062
ER 40 Collet Chuck / Mount ISO 40
  • Zum Spannen von Werkzeugen mit Zylinderschaft in ER-Spannzangen nach DIN 6499
ER 40 Collet Set 15 pcs. SKU: 106075
ER 40 Collet Set 15 pcs.
Milling Chuck Set ISO 40 SKU: 106044
Milling Chuck Set ISO 40
  • Max. chucking range 16 mm
  • Incl. collet set 4, 5, 6, 8, 10, 12, 14, 16 mm
Swivel Hold-Down Clamp Set 100/M12 SKU: 105790
Swivel Hold-Down Clamp Set 100/M12
  • High quality steel, black-finished
  • Available in pairs only
HNCS 130V Hydraulic Machine Vise SKU: 104932
HNCS 130V Hydraulic Machine Vise
  • High-grade machine vise for hydraulic clamping of parts
  • Hardened and ground surfaces ensure high-precision clamping, even when working with in-series connected vises
  • 4 work surfaces
  • Pull-down system for maximum secure clamping
  • Spindle safety guard protects from chips
  • Face parallelism 0.02 mm
HS 125 Hydraulic Machine Vise SKU: 125024
HS 125 Hydraulic Machine Vise
  • Hardened and precision-ground jaws and body
  • High precision and wear-resistant material ensure long service-life
  • Clamping pressure is up to ten times as high as with conventional machine vises
  • Swivel-base mounted vise body, 360° swivel
  • Constant clamping pressure, unaffected by vibration and shock
  • Hydraulic power booster
INDEX-feature / RT 160-320 SKU: 125805
INDEX-feature / RT 160-320
  • For direct and indirect division
  • From 2 to 66, all divisions from 68 to 132 dividable by 2, 3 a. 5 can be performed
Shell End Milling Arbor Ø16 SK 40 SKU: 103895
Shell End Milling Arbor Ø16 SK 40
  • For cutters with cross or longitudinal slot
  • Including parallel key, driver ring, cutter tightening screw, special wrench
  • Thread: M16
Shell End Milling Arbor Ø22 SK 40 SKU: 103900
Shell End Milling Arbor Ø22 SK 40
  • For cutters with cross or longitudinal slot
  • Including parallel key, driver ring, cutter tightening screw, special wrench
  • Thread: M16
Shell End Milling Arbor Ø27 SK 40 SKU: 103905
Shell End Milling Arbor Ø27 SK 40
  • For cutters with cross or longitudinal slot
  • Including parallel key, driver ring, cutter tightening screw, special wrench
  • Thread: M16
Shell End Milling Arbor Ø32 SK 40 SKU: 103910
Shell End Milling Arbor Ø32 SK 40
  • For cutters with cross or longitudinal slot
  • Including parallel key, driver ring, cutter tightening screw, special wrench
  • Thread: M16
Shell End Milling Arbor Ø40 SK 40 SKU: 103915
Shell End Milling Arbor Ø40 SK 40
  • For cutters with cross or longitudinal slot
  • Including parallel key, driver ring, cutter tightening screw, special wrench
  • Thread: M16
Coolant Concentrate 5 Ltr. SKU: 103184
Coolant Concentrate 5 Ltr.
  • Improved chip flow, longer tool service life and better cut profile
  • For sawing, drilling, milling, turning of steel, cast-iron, stainless steel, non-ferrous and light metals
  • Dilute with water 1:20
  • 1 canister contains 5 Ltr.
Machine vise with pull-down system NZM 125 SKU: 104918
Machine vise with pull-down system NZM 125
  • Pull-down system: absolutely secure workpiece hold even during cutting of heavy parts
  • Made of high-quality cast-iron
  • Hardened and precision-ground steel jaws
  • Dial turns 360° and has 1° scale division
  • Parallelism ± 0.0025 mm
  • Precise, hardened jaw guides
Assembly Stand SKU: 108930
Assembly Stand
  • For milling and boring tool setup
  • Horizontal and vertical mount
  • Simplifies the setup and reduces the tooling time at the machine
Machine Vise MS 125 SKU: 104955
Machine Vise MS 125
  • High quality cast iron
  • Hardened and ground replaceable steel jaws
  • Covered spindle
  • Forged bronze spindle nut
  • Including hand crank, swivel-base and scale
PMS 100 Precision Machine Vise SKU: 125012
PMS 100 Precision Machine Vise
  • Swivels on 2 axes
  • High precision vise for accurate and exact precisionsmechanics work (also suitable for watch making, jewellery industries)
  • Swivels from horizontal (180°) to vertical (90°)
  • Turns 360° on a dial
  • Jaws are made of hardened and precision-ground tool steel
Reduction Sleeve SK 40 / SK 30 SKU: 103750
Reduction Sleeve SK 40 / SK 30
  • Wechselbare und exakt zentrierte Verbindung zwischen Werkzeugmaschine und Werkzeug
  • Einsetzbar in Fräsmaschinen, Bearbeitungszentren und Bohrwerke
  • Kegelschaft innen und außen geschliffen
  • Festen Sitz, hohe Wiederholgenauigkeit beim Werkzeugwechsel
Tailstock / RT 200/250 SKU: 125820
Tailstock / RT 200/250
Rotary Table RT 200 SKU: 125835
Rotary Table RT 200
  • Completely enclosed design, prevents contamination from dirt and chips
  • Setup table rotates on a large ring-shaped box way
  • The very effective clamp pulls the setup table down straight, without any change of position or radial pressure and presses it against the guideway
  • For quick manual turning, the worm can be disengaged from the worm gear by pushing down the hand-lever
  • Setup table with 360° scale
  • The zero-backlash of worm and worm gear is adjustable
  • Hand wheel scale gradation 10''
  • Hand wheel can be replaced with indexing plate
  • With 4 radial setup T-slots (14 mm)
  • Very low profile
  • Guide slot in the vertical base plane
  • Can be used vertically

Accuracy (max. deviation):

  • Sface concentricity of work table setup surface 300 : 0.015
  • Concentricity of setup < = 0.015
  • Parallelism of setup to base surface 300 : 0.02
  • Concentricity of setup table taper bore < = 0.010
  • Parallelism of bore axis to vertical setup surface 0.03
  • Parallelism of bore axis to slot in the vertical setup surface 0.02
  • Parallelism between vertical setup area and conus taper connection axis - tailstock center 0.02
  • Parallelism between slot in the vertical setup surface and the connecting axis between centers 0.02
  • Division accuracy 45"
Roughing Shank Cutter 10 pcs. SKU: 108445
Roughing Shank Cutter 10 pcs.

Set = 10 pieces

  • DIN 844 B, DIN 1835 B, Weldon shaft
  • HSS, ionized and therefore HRC 68
  • Right-hand cut
  • For materials up to 1000 N/mm2 strength
  • Diameter: 6, 8, 10, 12, 14, 16, 18, 20, 22, 25 mm
Stud Bolt Set, and T-Slot Nuts 14/M12 SKU: 105355
Stud Bolt Set, and T-Slot Nuts 14/M12
  • 38 parts
  • 24 stud bolts, 4 each in the lengths 75, 100, 125, 150, 175, 200 mm
  • 6 T-slot nuts
  • 4 extension nuts
  • Hexagon nuts flanged
Optional Accessory Set / ST 130 SKU: 110970
Optional Accessory Set / ST 130

Anwendung: Werkstücke können zwischen den Teilapparat und dem Reitstock zur horizontalen Ausrichtung eines Werkstücks gespannt werden.

Erweiterung zum Universalteilapparat

Funktion Teilscheibenset für Indirektes Teilen:

  • Die Spindel wird mit Hilfe von Teilscheiben mit mehreren zueinander konzentrischen Lochkreisen positioniert
  • Mit Hilfe einer sogenannten Schere, zwei um die Kurbelachse drehbaren Zeiger, wird die Positionierung über mehrere Kubelumdrehungen erleichtert, indem diese das Zählen zwischen den Löchern auf der Teilscheibe erspart
  • Der Anwender braucht nur die Zahl der ganzen Drehungen zu zählen
  • Vorteil: eine Vielzahl von Teilungen können mit wenigen Teilscheiben realisiert werden, höhere Genauigkeit durch die Verwendung des übersetzenden Schneckengetriebes wird die Spindel wird die Kurbel hochauflösend weiter gedreht
Collet Chuck SK 40 SKU: 104320
Collet Chuck SK 40
  • Clamps all rotating tools with parallel shanks, e.g., drills, countersinks, reamers, lathe bore steel, pencil grinder, etc.
  • Incl. hook spanner
  • Chucking range 2-20 mm
Clamping Tool Set De Luxe 14/M12 SKU: 105295
Clamping Tool Set De Luxe 14/M12
  • 52 parts
  • In a convenient, sturdy steel magazine
  • 24 stud bolts, 4 each in the lengths 75, 100, 125, 150, 175, 200 mm
  • 4 extension nuts, 6 stepped clamps (3 pair), 6 T-slot nuts, 6 hexagon nuts flanged, step blocks (3 pairs)
Set of Step Blocks SKU: 105340
Set of Step Blocks
  • 20 each (10 pairs) in wooden box
  • Black-finished steel
Divider ST 130 SKU: 110960
Divider ST 130
  • Gear ratio 1:90, disengages for direct division, manual 360° rotation of chuck
  • Hand wheel with scale ring
  • Nonius division 10''
  • 6 masks for direct division of 2, 3, 4, 6, 8, 12, 24 parts
  • Hardened and ground teeth with 3-jaw chuck, 160 or 200 mm
Universal Facing / Lathe Bore Head ADA / SK40 SKU: 103404
Universal Facing / Lathe Bore Head ADA / SK40

Can be used on drill presses, lathes, milling machines, etc.

  • With self-actuated slide advance and automatic stop activation
  • Automatic advance ensures constant tool feed
  • Adjustable guides
  • Adjustable stops
  • Made of carbon-chromium-molybdenum steel
  • All parts are hardened and precision-ground
  • Guaranteed maximum accuracy
  • Incl. reducing sleeves 4, 8, 12 mm
Dividing head HT SKU: 110953
Dividing head HT
  • For direct and indirect divisions
  • Spindle runs in precision tapered roller bearings
  • Phosphorous/bronze worm gear with hardened and ground CrNi steel worm
  • Disengage gears for direct divisions
  • Gear ratio 40:1
  • Swivels from 10° below horizontal to vertical (-10° to 90°)
  • Every division for 2 to 50 parts and many divisions up to 380 parts
Roughing End Mill Cutter 63 SKU: 108402
Roughing End Mill Cutter 63
  • With cross groove
  • Right-hand cut with right-hand spiral
  • HSS-E, hardness HRC 68
  • Roughing cut teeth
Accessory-Set ISO 40 5-pc. SKU: 104596
Accessory-Set ISO 40 5-pc.
  • Incl. keyless drill chuck and drill chuck arbors
  • In wooden case

Content / Set:

  • Reducing sleeve: ISO 40 / MT 2
  • Reducing sleeve: ISO 40 /MT 3
  • Reducing sleeve: ISO 40 / MT 4
  • Tool holder bit: ISO 40 / B 18
  • Keyless drill chuck: 3-16 mm / B 18

Resources & Downloads

  • VHF 3 Brochure.pdf (0.28MB)

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

VHF 3 - With vertical type tilting head, automatic feed on all axes and horizontal axis
VHF 3
SKU : 301410


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation



This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.