Servogrind® RSM 600 NC - Servo-conventional cylindrical grinding with NC-controlled cycles for internal and external machining
The touchscreen allows for easy programming of individual grinding cycles

The touchscreen allows for easy programming of individual grinding cycles

Wide-opening doors allow for easy access to the fully enclosed working area

Wide-opening doors allow for easy access to the fully enclosed working area

The internal grinding device can be swivelled into the working area

The internal grinding device can be swivelled into the working area

An automatic central lubrication system continuously supplies all lubrication points and simplifies maintenance. The lubricant is stored in a central reservoir and distributed via lines to all lubrication points. Lubricant is metered via electronic control

An automatic central lubrication system continuously supplies all lubrication points and simplifies maintenance. The lubricant is stored in a central reservoir and distributed via lines to all lubrication points. Lubricant is metered via electronic control

Servogrind® RSM 600 NC - Servo-conventional cylindrical grinding with NC-controlled cycles for internal and external machining
The touchscreen allows for easy programming of individual grinding cycles
Wide-opening doors allow for easy access to the fully enclosed working area
The internal grinding device can be swivelled into the working area
An automatic central lubrication system continuously supplies all lubrication points and simplifies maintenance. The lubricant is stored in a central reservoir and distributed via lines to all lubrication points. Lubricant is metered via electronic control

CONVENTIONAL CYLINDRICAL GRINDER

Servogrind® RSM 600 NC

Item No. 124959
Grinding wheel dimensions
400 mm x 50 mm x 203 mm
Grinding length
600 mm
  • In stock
  • Inspected in Germany before delivery
  • Included: NC control with touchscreen, Electronic handwheel Y-, Z-axis, Internal grinding device all 14 items
Call

Free and without obligation. You will receive price and delivery time by email.

Data sheet (PDF)

Your KNUTH advisory team
Questions about accessories or installation?

Working area
Center height 180 mm
Grinding diameter 8 mm - 320 mm
With steady rest 15 mm - 150 mm
Grinding length 600 mm
Inside grinding diameter with rest 35 mm - 100 mm
Inside grinding diameter without rest 30 mm - 100 mm
Inside grinding depth 125 mm
Workpiece weight between centers (max.) 100 kg
Table swivel range (max.) -2° / +9°
Wheel speeds 45 m/s
Travels
Grinding head travel 195 mm
Headstock
Working headstock swivel range 90 deg
Working spindle taper 4 MT
Chuck diameter 200 mm
Work spindle speeds 25 1/min - 500 1/min
Grinding headstock
Grinding spindle speed 2.140 1/min
Grinding headstock swivel range (r+l) 10°
Inside grinding spindle speed 10.000 1/min
Tailstock
Tailstock taper 4 MT
Tailstock quill stroke 30 mm
Drive capacity
Motor rating - grinding spindle 4 kW
Motor rating inside grinding 1,1 kW
Motor rating - headstock / coolant pump 0,75 / 0,13 kW
Measures and weights
Grinding wheel dimensions 400 mm x 50 mm x 203 mm
Grindstone dimensions, inside grinding (max.) 40 mm x 25 mm x 13 mm
Overall dimensions (length x width x height) 3,03 m x 2,3 m x 2 m
Weight 2.800 kg

The Servogrind® RSM NC is a precision cylindrical grinding machine for long and heavy workpieces. Instead of a conventional hydraulic unit, however, the series has a modern servo motor drive for both axes, which raises the dynamics, efficiency and precision of the machine to a new level. With the integrated internal grinding device, internal and external cylindrical grinding can be carried out on one machine, which makes the series particularly flexible. The solid construction with a large machine bed, ground guideways and powerful drives for the work spindle and grinding spindle has proven itself many times over. The modern NC control with touchscreen requires no programming knowledge, simplifies operation and increases productivity.

  • NC control with touchscreen
  • Grinding cycles for internal and external cylindrical grinding
  • Servomotors in both axes
  • Swivelling table and swivelling work spindle
  • Extensive range of standard accessories

Machine bed

  • The heavy machine bed is designed for high-precision machining of large and heavy workpieces
  • The swiveling work table runs on precision-ground, wide and long v-block guides ensuring excellent vibration damping
  • With this design the total weight of table and workpiece is distributed evenly over a large area, which ensures high rigidity and minimal tilting torque
  • The robust tailstock ensures rigidity and accuracy during clamping of a workpiece between centers

Feed

  • The use of servo-conventional feed technology instead of a hydraulic system results in a more consistent and vibration-free advance of the work table
  • Premium servo drives allow axis movements with the precision and dynamics of modern CNC machines
  • All feed settings can be set with high accuracy and repeatability, and electronic stop gauges provide precise travel limits
  • Preloaded ball screws on all axes ensure reduced friction and significantly lower breakaway torques resulting in faster and more precise movements
  • The significantly reduced heat build-up leads to more consistent conditions during continuous operation and long-term wear reduction
  • Drives, spindles, and measuring systems are totally enclosed or mounted in protective enclosures and virtually maintenance-free

Grinding Headstock

  • The headstock runs on premium linear guides that allow maximum positioning accuracy even at the slightest axis movements
  • An extensively supported grinding spindle guarantees maximum precision and surface quality for roughing and finishing work
  • The inside grinder can be pivoted into the work area as needed and is driven by a separate motor

Work spindle drive

  • The work spindle headstock swivels to one side, and the spindle speed is infinitely variable
  • A 3-jaw chuck with 200 mm diameter and superior concentricity is included in this series’ standard equipment

Equipment

  • The totally enclosed work area features large doors for easy access and easy loading and unloading
  • All controls are arranged centrally on a control panel, and all technical parameters are displayed on the touch screen monitor
  • LED lights ensure good visibility and safety during machining operations
  • An automatic central lubrication system simplifies maintenance and reduces the operator's workload
  • The mobile electronic hand-wheel significantly simplifies machine setup and reduces down times
  • A rest for machining of long workpieces is included in the machine’s standard equipment
  • A powerful coolant system, dresser, grinding wheel balancer, and operating tools also are included in the standard package

NC control

  • The NC positioning control allows the combination of roughing, finishing and spark-out in one operation
  • Individual grinding cycles can be programmed via a touchscreen control, no programming knowledge required
  • The HMI provides easy to use control menus for every longitudinal and traverse cylindrical grinding application
  • Detailed graphics assist the user during data entry and show the current status during machining operations

NC control with touchscreen Item No.
NC control with touchscreen
NC control with touchscreen Item No.
Electronic handwheel Y-, Z-axis
Electronic handwheel Y-, Z-axis Item No.
Internal grinding device
Internal grinding device Item No.
Workspace protection
Workspace protection Item No.
Pneumatic tailstock quill
Pneumatic tailstock quill Item No.
3-Jaw chuck Ø 200 mm
3-Jaw chuck Ø 200 mm Item No.
Grinding wheel dresser
Grinding wheel dresser Item No.
Balancing mandrel and balancing stand
Balancing mandrel and balancing stand Item No.
Open and closed rest
Open and closed rest Item No.
Coolant device
Coolant device Item No.
Automatic central lubrication
Automatic central lubrication Item No.
Accessories for grinding
Accessories for grinding Item No.
LED work light
LED work light Item No.
Operating manual
Operating manual Item No.
Magnetic separator w. paper filter
Magnetic separator w. paper filter Item No. 254246
Magnetic separator w. paper filter
Grinding wheel flange Item No. 254247
Grinding wheel flange

Resources & Downloads

Similar Products

Not sure which machine fits?

Our experts advise you free of charge on selection, equipment and accessories.

+49 4321 609-0

Request a quote

Servogrind® RSM 600 NC - Servo-conventional cylindrical grinding with NC-controlled cycles for internal and external machining
Servogrind® RSM 600 NC
Item No. 124959

You will receive price and delivery time by email. If we have questions about the equipment, we will call you first. Prefer to talk right away? +49 4321 609-0

Only for questions about your request.
Optional: details for a more accurate quote
For example required equipment or workpiece.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. You will receive price and delivery time by email. If we have questions, we will call you first.
  3. No email? Please check your spam folder.

In a hurry? Call us: +49 4321 609-0

Something went wrong

Please refresh the page and try submitting the form again.

Call

Request a Consultation

Our advisory team will get back to you personally on the same business day. Free and without obligation. Prefer to talk right away? +49 4321 609-0

Only for questions about your request.
For example machine, workpiece or material.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. An advisor will call you, usually on the same business day.
  3. No email? Please check your spam folder.

In a hurry? Call us: +49 4321 609-0

Something went wrong

Please refresh the page and try submitting the form again.