Plasma-Jet AirPro K 1530 - Affordable small footprint plasma cutter, available only with CutFire
Plasma-Jet AirPro K 1530 - Affordable small footprint plasma cutter, available only with CutFire

Plasma-Jet AirPro K 1530

SKU : 144034

The machines of the Plasma-Jet AirPro K-series are economical cutting systems for air plasma sources. Developed as a cost-effective solution, the systems deliver good cutting quality with minimal operating costs. Compact design and small footprint make this series the perfect choice for workshops. Equipped with the latest technology from Eckelmann and Kjellberg, the machines are reliable partners for small manufacturers.

  • Compact one-piece design for space saving and easy relocation
  • High cutting quality using German Kjellberg technology
  • Designed for air plasma sources for min. operational cost
  • Very low maintenance
Working area
Cutting Width 1550 mm
Cutting length 3050 mm
Table height 600 mm
Table load capacity 345 kg/m2
Rapid feed 15000 mm/min
Plasma source Kjellberg
Measures and weights
Weight 1700 kg

Construction

  • Compact design with guides integrated into the table frame
  • Plasma cutting system for personal use providing high value at a lost cost
  • Machine can be moved and transported in its fully assembled state
  • The machine has a segment-wise suction of the working surface, whereby the respective suction flap is opened mechanically by the machine bridge passing.

Transmission and drives

  • Careful selection of the optimum components ensures that the same cutting functionality is available as in large plasma cutting systems
  • Dynamic AC servo drives from Panasonic on all axes with maintenance-free, zero-backlash planetary gears
  • The drives on both sides of the machine bridge and the drive of the X-slide along the machine bridge are carried out in a permanently precise manner by helical rack and pinion
  • Linear guide ways from on all axes, designed for long life and smooth motion even at high speeds. The width of linear guides on X/Y axes is 20/20 mm

Cutting head

  • The distance between plasma cutting nozzle and plate surface is maintained by the Z axis height control; height control is regulated by an electric arc
  • Plasma cutter head with collision guard

Control

  • CNC controller from Eckelmann
  • The Eckelmann IBE software is delviered as standard.

Table prepared for filter system (mechanical closure)
panasonic Servomotors qand drivers
automatic torch height control from Eckelmann
cutting torch with magnetic coupling and crash sensor
Eckelmann CNC-Unit
19” touchscreen by ELO
A-Modul from Beckhoff
laser pointer
Eckelmann IBE Software cncCUT Nest

Eckelmann CNC-Unit

Eckelmann E°EXC 880 E°CUT ECO

  • These application optimized CNC controles have extremely short cycle times, making them ideal for highy dynamic applications
  • The HMI offers a clearly structured design with greater user comfort thanks to its simnplicity, yet providing intuitive access to all functions of the machine
CutFire 100i Plasma source
  • The CutFire 100i is a powerful air/plasma system available at low cost, but suitable for wide variety of applications.
  • It is equipped with the latest inverter technology and is one of the few air-cooled systems on the market that offers a duty cycle of 100%. 
  • The cutting inverters CutFire 100i built in or after 2017 are equipped with the new Flash 101 machine torch. With its new consumables the torch uses air as swirl gas. The air rotating around the plasma arc stabilizes the arc to allow up to 20 mm deep piercing cuts.
  • The cooling and protective effect of the swirl gas ensures higher cutting speeds and longer consumable life.
  • The CutFire 100i is ideally suited for cutting thin sheets for ventilation systems and control cabinet construction, metal building applications, as well as many other craft, production and industrial operations.

CutFire 100i Advantages:

  • Piercing up to 20 mm • Precision cutting up to 3 mm • Higher piercing safety • New consumables • High cutting speeds • Electrical contact for finding the initial position (Option) • Swirl gas technology

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

CutFire 100i Plasma source SKU: 253391
CutFire 100i Plasma source
  • The CutFire 100i is a powerful air/plasma system available at low cost, but suitable for wide variety of applications.
  • It is equipped with the latest inverter technology and is one of the few air-cooled systems on the market that offers a duty cycle of 100%. 
  • The cutting inverters CutFire 100i built in or after 2017 are equipped with the new Flash 101 machine torch. With its new consumables the torch uses air as swirl gas. The air rotating around the plasma arc stabilizes the arc to allow up to 20 mm deep piercing cuts.
  • The cooling and protective effect of the swirl gas ensures higher cutting speeds and longer consumable life.
  • The CutFire 100i is ideally suited for cutting thin sheets for ventilation systems and control cabinet construction, metal building applications, as well as many other craft, production and industrial operations.

CutFire 100i Advantages:

  • Piercing up to 20 mm • Precision cutting up to 3 mm • Higher piercing safety • New consumables • High cutting speeds • Electrical contact for finding the initial position (Option) • Swirl gas technology

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Plasma-Jet filter extraction system 4.000 m3/h SKU: 253397
Plasma-Jet filter extraction system 4.000 m3/h
Water table for plasma cutting machines SKU: 253403
Water table for plasma cutting machines

As an option, the water table can be exchanged for a downdraft suction table. The choice must be indicated when ordering.

Resources & Downloads

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

Plasma-Jet AirPro K 1530 - Affordable small footprint plasma cutter, available only with CutFire
Plasma-Jet AirPro K 1530
SKU : 144034


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation



This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.