A press brake bends sheet metal by pressing a punch into a die, and the depth of the stroke sets the bending angle, from a single clean edge through to a complex multi-bend profile.
A press brake bends sheet metal by pressing a punch into a die, and the depth of the stroke sets the bending angle, from a single clean edge through to a complex multi-bend profile. KNUTH supplies pre...
Enter sheet thickness and length – see matching models.
Required press force: –
Guide value for air bending – how we calculate
Press force = 1.42 × tensile strength × sheet thickness² × bending length ÷ V opening. The smaller the die, the higher the force and the shorter the flange may be. “Automatic” uses the usual die for your sheet thickness. The suggested models include a 15% force reserve. We are happy to recalculate for your part.
All models
Sheet thickness: guide value over the full length.
* Guide value based on the rule of thumb V = 8 × sheet thickness, over the full length: mild steel up to 450 N/mm², stainless steel up to 700 N/mm². The actual value depends on tooling and material.
Equipment
standard + optional extra
AHK M NC
AHK V CNC
Control
NC touchscreen, 500 programs
CNC Delem DA-53T with graphics
+Delem DA58, DA66T or DA69T (3D)
Back gaugesets the flange length
2 axes: forward/back, up/down
+Longer travel, more gauge fingers
1 axis: forward/back
+2 or 4 axes
+Longer travel, more gauge fingers
Crowningsame angle over the full length
+Motorised
Motorised (AHK V 13040: option)
Tooling
Upper and lower tool (4 V openings), quick clamping
Upper and lower tool, hardened and ground
+Upper tool 105 mm high for deep boxes
European tool holder (Promecam) – standard tools fit.
Safety
Light curtains
AHK M 1230 also with AKAS laser guard
AKAS laser guard at the tool, rear light barrier
Operation
2 support arms, foot switch with emergency stop
2 support arms, foot switch, ECO mode
+Energy-saving drive, more support arms, control cabinet air conditioning
FAQ's
What is a press brake and what is it used for?
A press brake is a machine for bending sheet metal. A punch presses the workpiece into a die and forms a defined edge, and the depth of the stroke produces different bending angles. Press brakes are used for enclosures, panelling, profiles and folded parts in machinery building, metal fabrication and general sheet metal work.
How does a press brake work?
The sheet rests on the die, the punch lowers and presses it into the die opening. In air bending, the most common method, the punch enters only far enough to form the required angle. The deeper the punch goes, the sharper the angle, so any obtuse bending angle can be set without a tool change.
What is the difference between a conventional and a CNC press brake?
On a conventional press brake the stop and bending depth are set by hand. It is robust and economical for simple edges and small batches. A CNC press brake controls the back gauge, press force and bending angle by programme, which shortens set-up time and secures repeatability on complex parts and higher quantities.
What is the difference between a press brake, a bending press and a folding machine?
Press brake and bending press, also called a die bending machine, are names for the same machine: a punch presses the sheet into a die. A folding machine works differently, clamping the sheet and swinging a folding beam upwards. For tool-bound bending with punch and die, the press brake is the right machine.
What does crowning mean on a press brake?
Under load the press beam deflects slightly, so the bending angle can come out different in the centre than at the ends. Crowning compensates for that deflection so the angle stays even over the whole bending length. On CNC press brakes crowning is controlled automatically, which keeps results even on long edges.
Which press brake suits my business?
The key factors are bending length, press force and control. The bending length has to match the longest edge, the press force the combination of sheet thickness and material. Simple, repeating bends are covered by a conventional press brake, while complex profiles and higher quantities call for a CNC press brake. Describe your workpieces and our specialists will recommend the right machine size.
What tooling does a press brake need?
A press brake works with an upper tool, the punch, and a die. The punch sets the radius and form of the edge, and the V-opening of the die is matched to the sheet thickness. Special tooling covers tight or multi-bend profiles, and quick-clamping systems speed up the tool change. Matching tooling and dies are available from KNUTH.
Are KNUTH press brakes CE compliant?
Yes. Each machine is given a documented inspection and shipped CE-compliant. The declaration of conformity and the full documentation are included in the delivery.
Is a press brake suitable for a training workshop?
Yes. Conventional press brakes are common in training and teaching workshops, because they show sheet metal bending clearly and with manageable operation. For training on modern control technology, CNC press brakes let apprentices practise programming and repeatability. We advise on safety equipment and the right machine size.
How are service and spare parts handled for press brakes?
Service runs through our own service network, with our own service engineers looking after the machines in the field. A ten year spare parts supply commitment applies. Commissioning and operator instruction for your team are available as a separate service.
Press brakes for sheet metal work
The press brake, also known as a bending press or die bending machine, is the core machine for bending sheet metal. A punch presses the workpiece into a die and forms it into a defined edge. The depth of the stroke sets the bending angle, from a simple fold through to a multi-bend profile. That is how enclosures, housings, panels and structural parts are made for metal fabrication, vehicle building and general sheet metal work. KNUTH supplies press brakes in conventional and CNC versions and across several machine sizes.
How a press brake works: punch and die
In bending, the punch lowers onto the sheet, which rests on the die. The usual method is air bending: the punch enters only far enough to form the required angle, without pressing the sheet fully into the die. Working through the stroke depth, the machine sets any obtuse angle. Two things decide the accuracy:
Crowning: under load the press beam deflects slightly. Crowning compensates for that deflection so the bending angle stays even over the full length.
Angle measurement: CNC press brakes measure and correct the angle during the bend, which is how they reach high repeatability.
The bending length you can reach and the press force you need depend on sheet thickness and material. The values for the machines currently available are shown in the product cards above.
Conventional or CNC press brake: which one fits
KNUTH press brakes are hydraulic. The difference lies in the control:
Conventional press brake: the stop and bending depth are set by hand. This build is robust, easy to operate and economical for simple edges and small batches.
CNC press brake: a control system handles the back gauge, press force and bending angle by programme. That shortens set-up time, secures repeatability and suits complex parts and larger quantities.
As a rule of thumb, simple and repeating bends point to the conventional machine, while complex profiles and high volumes point to the CNC press brake.
Technical features and machine sizes
Two figures drive the choice. The bending length has to match the longest workpiece edge, and the press force has to match the combination of sheet thickness and material. As a guide, thicker sheet and longer edges call for more press force. KNUTH supplies press brakes from the compact size for the workshop through to the long, heavy CNC machine for structural fabrication. Further features include the programmable back gauge for accurate positioning, crowning for even angles and safety equipment to protect the operator. The exact values for each series are given in the product cards above.
Tooling and dies
The result from a press brake stands or falls with the tooling. Punch and die decide which angles and radii are possible:
Punches (upper tools) in various tip radii and forms, including tooling for tight and multi-bend profiles
Dies with different V-openings for different sheet thicknesses
Quick-clamping systems for a fast tool change
Which tooling you need depends on your sheet and your bends. Matching tooling and accessories can be quoted together with the machine.
Applications and industries
The press brake is at work right across sheet metal fabrication. Typical workpieces and industries are:
Enclosures, control cabinets and panelling in machinery and plant building
Profiles, angles and folded parts in metal and structural steel work
Components for vehicle, ventilation and facade construction
KNUTH is an established supplier of machine tools with a coordinated range for sheet metal work. Each machine is given a documented inspection and shipped CE-compliant. You get personal advice on the right bending length, press force and equipment instead of a bare catalogue choice, along with tooling and accessories from a single source. Around 1,000 machines are ready to ship from the European central warehouse in Germany. For an overview of the full sheet metal range, see the sheet metal processing category.
Service, spare parts and availability
Service runs through our own service network, with our own service engineers looking after the machines in the field. Commissioning and operator instruction for your team are available as a separate service. A ten year spare parts supply commitment applies. For help sizing your press brake, choosing tooling or checking availability, reach us through the contact page.