Plasma-Jet Compact H 1530 - Compact system for large panels with integrated extraction table for the use of HYPERTHERM cutting technology
Optimum track speed even for fine contours and tight radii

Optimum track speed even for fine contours and tight radii

Panasonic servo motors and EtherCAT network type drives

Panasonic servo motors and EtherCAT network type drives

Plasma-Jet Compact H 1530 - Compact system for large panels with integrated extraction table for the use of HYPERTHERM cutting technology
Optimum track speed even for fine contours and tight radii
Panasonic servo motors and EtherCAT network type drives

Plasma-Jet Compact H 1530

SKU : 144031

Plasma-Jet Compact H is a plasma cutting system that has been specially tailored to the needs of our customers. With its compact design, the machine is suitable for small workshops as well as for large industrial companies. Modern technology from Hypertherm and high-quality components from world-renowned manufacturers guarantee high-quality cutting results even in multi-shift operation.

  • Compact design
  • space saving and easy relocating
  • High performance with USA Hypertherm technology
  • Wide selection of HYPERTHERM plasma sources (optional)
  • Low maintenance, rugged design
Working area
Cutting width 1500 mm
Cutting length 3000 mm
Table height 600 mm
Table load capacity 410 kg/m2
Rapid feed 18000 mm/min
Plasma source Hypertherm
Measures and weights
Weight 2250 kg

Construction

  • The Plasma-Jet Compact Series set themselves apart from the Plasma-Jet TrueCut series by a fully integrated machine frame that is connected to the table via a bottom plate, so the machine can be transported in one piece and requires minimum space
  • If small plasma sources (e.g. Powermax) are used, they also are stored on a shelf inside the frame
  • Table is prepared for dust collection system, being equipped with electro-pneumatically actuated suction flaps for an efficient fume extraction of the segment where the cutting process is momentary in action

Transmission and drives

  • Dynamic AC servo drives from Panasonic on all axes with maintenance-free, zero-backlash planetary gears
  • Low-wear and low-maintenance helical gears are designed for continuous operation
  • Linear guide ways from on all axes, designed for long life and smooth motion even at high speeds. The width of linear guides on X/Y axes is 20/20 mm

Cutting head

  • Z axis with ball screw transmission and servo-driven automatic torch height control
  • Quick-coupling for cutter head allows quick head exchanges for reduced tooling time

Control

  • CNC controller from Hypertherm - Edge CONNECT
  • The ProNest LT Software is delviered as standard.

Please select the plasma source with the required power.

  • Powermax 105 Sync plasma source (cutting capacity in unalloyed steel: Recommended: 32 mm 500 mm/min, 38 mm 250 mm/min, severing cut: 50 mm 125 mm/min, plunge-cut: 22 mm)
  • Maxpro 200 (cutting capacity in unalloyed steel: Virtually burr-free cutting capacity 20 mm, plunge-cut capacity (production) 32 mm, severing cut* 75 mm)
  • XPR 170 (cutting capacity in unalloyed steel: Plunge cut max. 40 mm, severing cut max. 60 mm)
  • XPR 300 (cutting capacity in unalloyed steel: Plunge cut max. 50mm, severing cut max. 80 mm)

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Table prepared for filter system (automatic closure control ) SKU:
Table prepared for filter system (automatic closure control )
Table prepared for filter system (automatic closure control ) SKU:
Panasonic Servomotors qand drivers
Panasonic Servomotors qand drivers SKU:
Automatic burner height control with Hypertherm THC sensor
Automatic burner height control with Hypertherm THC sensor SKU:
Cutting torch with magnetic coupling and crash sensor
Cutting torch with magnetic coupling and crash sensor SKU:
Hypertherm Edge Connect CNC-Unit
Hypertherm Edge Connect CNC-Unit SKU:

Hypertherm EDGE® Connect

  • EDGE® Connect, Hypertherm’s newest Computer Numeric Control (CNC) platform, delivers unmatched reliability, powerful embedded capabilities, and a high level of customizability
  • With Patented CutPro® Wizard, even new operators can be cutting production parts in less than five minutes
  • On-screen Software Operator’s Console (Soft OpCon) allows easy setup and operation of cutting station and manual motion
  • Integrated communications with plasma and torch height control systems deliver automated and expert control using installed factory or custom cut charts
  • Custom cut charts can be created and controlled in the part program or made available to the CutPro Wizard
  • EDGE Connect runs on the Windows® 10 Enterprise operating system

Phoenix® buit-in software

  • Phoenix® software is the core operational interface and is common across the entire Hypertherm family of CNC systems
  • Contains built-in cut charts for automatically setting process parameters for mild steel, stainless, and aluminum to enable consistently optimized cutting performance
  • The wizards and diagnostic support tools enable easy setup, use and rapid troubleshooting
  • Built-in help and cutting optimization tips for improving table performance and process outcomes at the touch of a button
19” touchscreen by ELO
19” touchscreen by ELO SKU:
Ethercat-E
Ethercat-E SKU:
Laser pointer
Laser pointer SKU:
ProNest LT Essentials
ProNest LT Essentials SKU:

Hypertherm Edge Connect CNC-Unit

Hypertherm EDGE® Connect

  • EDGE® Connect, Hypertherm’s newest Computer Numeric Control (CNC) platform, delivers unmatched reliability, powerful embedded capabilities, and a high level of customizability
  • With Patented CutPro® Wizard, even new operators can be cutting production parts in less than five minutes
  • On-screen Software Operator’s Console (Soft OpCon) allows easy setup and operation of cutting station and manual motion
  • Integrated communications with plasma and torch height control systems deliver automated and expert control using installed factory or custom cut charts
  • Custom cut charts can be created and controlled in the part program or made available to the CutPro Wizard
  • EDGE Connect runs on the Windows® 10 Enterprise operating system

Phoenix® buit-in software

  • Phoenix® software is the core operational interface and is common across the entire Hypertherm family of CNC systems
  • Contains built-in cut charts for automatically setting process parameters for mild steel, stainless, and aluminum to enable consistently optimized cutting performance
  • The wizards and diagnostic support tools enable easy setup, use and rapid troubleshooting
  • Built-in help and cutting optimization tips for improving table performance and process outcomes at the touch of a button
Powermax 125 Plasma source

Maximum productivity

  • Considerably faster progress with 5x higher cutting speeds compared to oxy-fuel cutting in 12 mm structural steel
  • Grinding and edge preparation take considerably less time due to the excellent cutting and gouging quality
  • Maximize your cutting time with 100% uptime

Low operating cost

  • Lower your cost due to 4x longer consumable life compared to other systems in this class
  • End of electrode life is automatically detected and power is cut off upon electrode overload to protect torch and workpiece from damages

Easy to use for cutting and gouging

  • No need to adjust the air pressure. Smart Sense™ technology ensures that the air pressure is always set correctly
  • Various easy-to-use torch types for different tasks are available

Developed and tested for use in harsh environments

  • Duramax® Hyamp™ torches are designed with high impact strength and high temperature resistance
  • SpringStart™ technology ensures consistent starting and a more reliable torch
  • Minimal maintenance requirement ensures maximum uptime

Cutting capacity

  • Recommended thickness 38 mm Cutting speed 457 mm/min
  • Severing cut thickness 44 mm Cutting speed 250 mm/min
  • Severing cut (in manual operation) thickness 57 mm Cutting speed 125 mm/min
  • Plunge-cut thickness 25 mm
Powermax 125 Plasma source SKU: 253715
Powermax 125 Plasma source

Maximum productivity

  • Considerably faster progress with 5x higher cutting speeds compared to oxy-fuel cutting in 12 mm structural steel
  • Grinding and edge preparation take considerably less time due to the excellent cutting and gouging quality
  • Maximize your cutting time with 100% uptime

Low operating cost

  • Lower your cost due to 4x longer consumable life compared to other systems in this class
  • End of electrode life is automatically detected and power is cut off upon electrode overload to protect torch and workpiece from damages

Easy to use for cutting and gouging

  • No need to adjust the air pressure. Smart Sense™ technology ensures that the air pressure is always set correctly
  • Various easy-to-use torch types for different tasks are available

Developed and tested for use in harsh environments

  • Duramax® Hyamp™ torches are designed with high impact strength and high temperature resistance
  • SpringStart™ technology ensures consistent starting and a more reliable torch
  • Minimal maintenance requirement ensures maximum uptime

Cutting capacity

  • Recommended thickness 38 mm Cutting speed 457 mm/min
  • Severing cut thickness 44 mm Cutting speed 250 mm/min
  • Severing cut (in manual operation) thickness 57 mm Cutting speed 125 mm/min
  • Plunge-cut thickness 25 mm
Tube cutting system, 3,000 mm, for Compact series Hypertherm systems SKU: 253552
Tube cutting system, 3,000 mm, for Compact series Hypertherm systems
Maxpro 200 Plasma source SKU: 253406
Maxpro 200 Plasma source
  • The MAXPRO200® LongLife® Plasma Cutting System was developed for high-capacity, high-load cutting and gouging applications. This user-friendly system can be operated with air, oxygen or nitrogen plasma. It features high cutting speeds and quick process change-overs for maximum productivity The latest Hypertherm consumable design, like LongLife® technology, increase wear resistance and consumable life resulting in lower per-part cost.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Plasma-Jet H Softwareoption ProNest SKU: 253413
Plasma-Jet H Softwareoption ProNest
Plasma-Jet H Softwareoption Common Line Cutting SKU: 253414
Plasma-Jet H Softwareoption Common Line Cutting
Plasma-Jet H Softwareoption Collision Avoidance SKU: 253415
Plasma-Jet H Softwareoption Collision Avoidance
Plasma-Jet H Softwareoption Chain and Bridge Cutting SKU: 253416
Plasma-Jet H Softwareoption Chain and Bridge Cutting
engraving and marking system for PowerMax and MaxPro SKU: 253815
engraving and marking system for PowerMax and MaxPro
Plasma-Jet filter extraction system 4.000 m3/h SKU: 253397
Plasma-Jet filter extraction system 4.000 m3/h
Additional tube support SKU: 253401
Additional tube support

Additional tube support - must indicate, if round or square tubes

1 meter extension for tube cutting SKU: 253402
1 meter extension for tube cutting
Manual bevel device for cutting head SKU: 253404
Manual bevel device for cutting head
Square adaptor for square tube cutter unit on Plasma-Jet SKU: 253651
Square adaptor for square tube cutter unit on Plasma-Jet
Powermax 105 Sync plasma source SKU: 253888
Powermax 105 Sync plasma source
  • The Powermax105 SYNC® is a next-generation professional air plasma system that makes operating the system a breeze when cutting and gouging up to 32 mm.
  • With automated process control using advanced RFID-compatible SmartSYNC® torch and revolutionary one-piece inserted wear part that provides trackable usage data.
  • The Powermax105 SYNC maximizes productivity with lower downtimes, optimized cutting quality, and excellent wear part inventory management.

Cutting capacity

  • Recommended thickness 32 mm Cutting speed 500 mm/min
  • Severing cut thickness 38 mm Cutting speed 250 mm/min
  • Severing cut (shearing in manual operation) thickness 50 mm Cutting speed 125 mm/min
  • Plunge-cut thickness 22 mm
XPR 170 Core Plasma source SKU: 253407
XPR 170 Core Plasma source
  • The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
  • It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.
  • Maximum output: 170 A
  • Thicknesses for optimal cutting quality: 3–35 mm
  • Cutting speed for 20 mm at 170 A: 1575 mm/min
  • Hole cutting capacity: 40 mm
  • Separating cut capacity: 60 mm

The Core console is designed for customers who mainly cut unalloyed steel. The Core console, using nitrogen as the plasma gas, offers full X-definition performance for unalloyed steel and entry-level performance for alloyed steel and aluminum. Core allows marking with nitrogen plasma gas on all materials

XPR 170 VWI Plasma source SKU: 253408
XPR 170 VWI Plasma source
  • The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
  • It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.
  • Maximum output: 170 A
  • Thicknesses for optimal cutting quality: 3–35 mm
  • Cutting speed for 20 mm at 170 A: 1575 mm/min
  • Hole cutting capacity: 40 mm
  • Separating cut capacity: 60 mm

The VWI (Vented Water Injection™) console was developed for customers whose volumes consist primarily of unalloyed steel, but who need better performance when cutting alloyed steel and aluminum, the ability to plunge-cut thicker materials, or high-quality marking. The VWI console offers all the advantages of the Core console, as well as:

  • Patent-pending VWI processes, using a protective shield for water spraying and delivering superior cutting results with alloyed steel and aluminum
  • The F5 fuel gas function delivers better results than cutting with nitrogen for thinner alloys
  • The argon gas function provides extremely good marking results and a higher plunge-cutting capacity with argon-supported cutting processes
XPR 170 Optimix Plasma source SKU: 253409
XPR 170 Optimix Plasma source
  • The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
  • It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.
  • Maximum output: 170 A
  • Thicknesses for optimal cutting quality: 3–35 mm
  • Cutting speed for 20 mm at 170 A: 1575 mm/min
  • Hole cutting capacity: 40 mm
  • Separating cut capacity: 60 mm

The OptiMix console was developed for customers who cut large quantities of alloyed steel and aluminum and need top-quality cutting results for these applications. The OptiMix console offers all the features of the VWI console plus the ability to mix up to three different gases:

  • Reduces the costs of buying premixed fuel gases like H35
  • Offers the flexibility of adjusting gas mixes to optimize cutting results for alloyed steel and aluminum
Softwareoption ProNest LT Upgrade SKU: 254125
Softwareoption ProNest LT Upgrade

Resources & Downloads

Optional Accessories

Explore the range of compatible accessories in stock

consultation

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

Plasma-Jet Compact H 1530 - Compact system for large panels with integrated extraction table for the use of HYPERTHERM cutting technology
Plasma-Jet Compact H 1530
SKU : 144031
*
*
*
*
*
*

*
*
*
*
*

*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

*
*
*
*
*

*
*
*

*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.