Tube and Profile Bending Machines

Tube and profile bending machines roll tube, section and bar into precise radii and shapes.

read more

Tube and profile bending machines roll tube, section and bar into precise radii and shapes. KNUTH carries the range for South African fabrication and heavy industry: from the manual pipe roller for th...

read more
Call: +27-11-822-4610

Your KNUTH advisory team
Personal reply on the same working day.

  • Family-run since 1923Machine tools worldwide
  • Every machine testedbefore delivery
  • Machines in stockready in Johannesburg
  • Own service teamtechnicians across Africa

Not sure which machine fits?

Our experts advise you free of charge on selection, equipment and accessories.

+27-11-822-4610

FAQ's

Tube and profile bending machines roll straight tube, section and bar into radii, rings and bows. They are put to work in mining, oil and gas, heavy engineering and general fabrication, wherever a bent component has to be made from straight stock.

It depends on the section, the volume and the material. Once-off items and short runs are covered by a manual pipe roller, while heavier sections and steady production call for a motorised or hydraulic profile and tube roller. Tell us the sections you run and we recommend the right size.

Every machine is inspected with documented results and built to European testing standards, and the documentation is available on request. That gives your operation a clear paper trail for the machine.

Yes. Manual and compact profile rollers are straightforward to operate and hard-wearing, which suits training centres and apprenticeships in fabrication. For a first step into controlled bending, machines with a control panel and stored programmes work well.

Service in southern Africa runs through KNUTH South Africa and local service partners. Common spare parts are supplied through the service organisation, special parts directly from the manufacturers of the components, and a ten year spare parts supply commitment applies.

CNC-controlled tube benders are found on the market mainly for large, repeating series. The current KNUTH range covers the manual to hydraulic segment. For a controlled solution, raise it with us in the enquiry.

That depends on the machine and the tooling. The workable cross-section follows wall thickness, material and the wanted radius, and soft materials such as aluminium and copper allow tighter radii than higher-strength steel. The exact ranges are listed with the individual machines in the product grid.

A tube end finishing machine prepares tube ends: it chamfers, forms, expands and flares them so the fit and the weld seam hold. It rounds out the bending machines for a complete tube workflow. The ranges sit in the tube end finishing subcategory.

From KNUTH as a supplier of machine tools. Choose the right tube and profile bending machine in the product grid and send an enquiry, and we come back with a quotation and a delivery date. The page gives no fixed price, because it depends on size, control and accessories.

The usual materials are steel, stainless steel, aluminium and copper, as tube, solid or hollow section or bar. Soft materials allow tighter radii, while higher-strength grades need more bending force and larger radii.

How tube and profile rolling and bending works

Tube and profile bending machines take straight tube, bar and section and bring them round into radii, rings and bows. A section roller passes the workpiece through three driven rolls that build the curve steadily along the length, which is how angle, flat and specialised profiles are shaped. Rolling tube asks for a cross-section that stays round rather than folding in, so the machine works with matched tooling and, on tighter radii, with support inside the bore. Most pipe rollers run in both directions, so a component with several bends is completed in a single set-up.

Manual and hydraulic machines: matching the machine to the job

Match the machine to the section, the volume and the material. A manual pipe roller is hard-wearing and economical and is the sensible choice for once-off items, short runs and general workshop work. A motorised or hydraulic profile and tube roller carries the force needed for heavier sections and drives its bending rolls hydraulically, which is what steady production calls for. The controls are uncomplicated, so an operator turns out a clean radius without lengthy training.

Applications in South African industry

Rolled tube and section carry the load in mining structures and support work, in oil and gas pipework and skids, and in heavy engineering and structural steel, alongside railings, handrails, frames and roll-over protection for vehicles and equipment. The machines roll steel, stainless steel, aluminium and copper, from soft grades through to the higher-strength material these sectors rely on.

Tube end finishing

Wherever tube is joined, coupled or welded, the end has to be prepared first. Tube end finishing machines chamfer, form, expand and flare tube ends so the fit and the weld seam hold. They round out the bending and rolling machines for a complete tube workflow. The individual ranges sit in the tube and profile rolling machines and tube end finishing subcategories.

Why KNUTH

KNUTH is a supplier of machine tools with its own inspection and quality control. Every machine is inspected with documented results, and the documentation is available on request. This gives operations in demanding sectors a machine backed by a clear paper trail.

Service and spare parts

Service in southern Africa runs through KNUTH South Africa and local service partners, so support sits close to the plant. Common spare parts are supplied through the service organisation, special parts directly from the manufacturers of the components, and a ten year spare parts supply commitment applies. For sizing, tooling or availability queries, reach us through the contact page or send an enquiry direct from the machine.

Request a quote

Item No.

You will receive price and delivery time by email. If we have questions about the equipment, we will call you first. Prefer to talk right away? +27-11-822-4610

Only for questions about your request.
Optional: details for a more accurate quote
For example required equipment or workpiece.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. You will receive price and delivery time by email. If we have questions, we will call you first.
  3. No email? Please check your spam folder.

In a hurry? Call us: +27-11-822-4610

Something went wrong

Please refresh the page and try submitting the form again.

Call

Request a Consultation

Our advisory team will get back to you personally on the same business day. Free and without obligation. Prefer to talk right away? +27-11-822-4610

Only for questions about your request.
For example machine, workpiece or material.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. An advisor will call you, usually on the same business day.
  3. No email? Please check your spam folder.

In a hurry? Call us: +27-11-822-4610

Something went wrong

Please refresh the page and try submitting the form again.