Tube, Pipe and Section Rolling Machines

A tube and profile rolling machine bends tube, pipe, section and bar into precise radii, rings and arcs.

read more

A tube and profile rolling machine bends tube, pipe, section and bar into precise radii, rings and arcs. KNUTH supplies tube and section rollers, from manual machines to production machines with hydra...

read more
Call: +27-11-822-4610

Your KNUTH advisory team
Personal reply on the same working day.

  • Family-run since 1923Machine tools worldwide
  • Every machine testedbefore delivery
  • Machines in stockready in Johannesburg
  • Own service teamtechnicians across Africa

Not sure which machine fits?

Our experts advise you free of charge on selection, equipment and accessories.

+27-11-822-4610

FAQ's

A tube and profile rolling machine, or tube roller, forms tube, section and bar into precise radii, rings and bows. It is at work in metal fabrication, mining, oil and gas and heavy engineering, wherever curved parts are made from straight stock without crushing the cross-section.

That depends on diameter, wall thickness, material and radius. A section roller for roll bending suits large radii, rings and bows, while hydraulic tube bending suits tighter radii for railings and tube structures. Which of the two machines fits your cross-sections and materials is something we settle in the enquiry.

The machines are built to European testing standards. The related documentation is available on request, so you can confirm the machine meets the requirements that apply to your operation.

Yes. Manually adjusted tube rollers are clear to operate and robust, which suits training workshops and apprenticeships in metal fabrication. For a first step into repeatable work, motorised rolling machines are a good fit.

Service in South Africa runs through local service partners, with a base in Germiston near Johannesburg. Common spare parts come from the central warehouse, and a ten year spare parts supply commitment applies. Availability and delivery time are on request.

Roll bending is economical for large radii and works the section over three rolls, which is the classic section roller job. Mandrel bending suits tight radii and thin-walled tube, where an internal mandrel supports the wall so it does not collapse. The KNUTH focus is on roll bending and hydraulic tube bending.

The usual materials are mild steel, stainless steel, aluminium and copper, as round tube, square tube, flat steel or angle section. Soft materials allow tighter radii, while higher-strength grades need more force and larger radii. The exact ranges are listed with the individual machines in the product grid.

CNC-controlled machines are found on the market, mainly for large, repeating series. The current KNUTH range covers manual to hydraulic machines. Motorised or CNC versions are on request.

Pricing is on request. The price depends on the process, the capacity, the drive and the accessories, so there is no single list price. You receive a quotation per configuration. Choose the machine in the product grid and send an enquiry.

Yes, with the matching rolls and tooling. As a section roller it forms angle section and flat steel into railings, rings and frames alongside round and square tube.

What is a tube and profile rolling machine

A tube and profile rolling machine, also known as a tube roller or section roller, forms tube, section and bar into a defined radius without crushing the cross-section. The workpiece either passes over adjustable rolls or is drawn around a bending tool. This produces rings, bows and coils from round tube, square tube, flat steel and angle section. The result is a clean, repeatable curve that keeps its shape.

Rolling and bending processes

The radius decides the process. In roll bending, also called section rolling, three rolls build the curve gradually along the length of the workpiece, which is why the machine is often called a section roller. This suits large radii, rings and bows, and it works flat steel and angle section as readily as tube. In hydraulic tube bending the tube is drawn around a bending tool for tighter radii, which suits railings and tube structures. KNUTH offers a machine for each of these two routes.

Materials, applications and industries

Rolled and bent parts are made from mild steel, stainless steel, aluminium and copper, as round tube, square or rectangular tube, flat steel and angle section. The right pipe roller machine follows diameter, wall thickness, material and radius. Typical work includes railings, handrails and staircases, tube structures and frames, vehicle and chassis parts, and facade elements. In South Africa these machines also serve mining, oil and gas and heavy engineering, where rolled tube and section go into structures, frames and plant.

Drive and control

Rolling machines run on motorised, mechanical or hydraulic drives. Smaller tube rollers are adjusted by hand, while larger ones are motorised for repeatable results. CNC-controlled rolling machines are available on the market, mainly for large, repeating series. Availability of motorised and CNC versions is on request.

Why KNUTH, service and availability

KNUTH has supplied machine tools for more than 100 years. The ranges are selected with care. Service in South Africa runs through local service partners, with a base in Germiston near Johannesburg. Common spare parts come from the central warehouse, and a ten year spare parts supply commitment applies. Availability, delivery time and pricing are on request.

Related categories

Rounding out a full tube workflow: Tube End Finishing Machines chamfer, form and flare tube ends for a clean fit and weld seam. Plate Rolling Machines roll sheet and plate into cylinders and cones. For the full picture, see the Tubes and Profile Processing overview.

Request a quote

Item No.

You will receive price and delivery time by email. If we have questions about the equipment, we will call you first. Prefer to talk right away? +27-11-822-4610

Only for questions about your request.
Optional: details for a more accurate quote
For example required equipment or workpiece.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. You will receive price and delivery time by email. If we have questions, we will call you first.
  3. No email? Please check your spam folder.

In a hurry? Call us: +27-11-822-4610

Something went wrong

Please refresh the page and try submitting the form again.

Call

Request a Consultation

Our advisory team will get back to you personally on the same business day. Free and without obligation. Prefer to talk right away? +27-11-822-4610

Only for questions about your request.
For example machine, workpiece or material.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. An advisor will call you, usually on the same business day.
  3. No email? Please check your spam folder.

In a hurry? Call us: +27-11-822-4610

Something went wrong

Please refresh the page and try submitting the form again.