Circular Sawing Machines

An industrial circular saw cuts tube, profile and solid bar with a toothed blade that turns at low speed under coolant.

read more

An industrial circular saw cuts tube, profile and solid bar with a toothed blade that turns at low speed under coolant. The workpiece stays cool and the cut face is square with hardly any burr, which ...

read more
Call: +27-11-822-4610

Your KNUTH advisory team
Personal reply on the same working day.

  • Family-run since 1923Machine tools worldwide
  • Every machine testedbefore delivery
  • Machines in stockready in Johannesburg
  • Own service teamtechnicians across Africa

Not sure which machine fits?

Our experts advise you free of charge on selection, equipment and accessories.

+27-11-822-4610

FAQ's

A circular saw machine parts tube, profile and solid bar with a toothed blade at low speed under coolant. The workpiece stays cool, so the design is also called a cold saw. Fabrication shops, steel merchants and maintenance departments use it wherever a cut has to be accurate and needs no dressing afterwards.

Circular saw machine and cold saw mean the same thing: a toothed blade, low speed, coolant and a clean square face. A cutting disc saw, also sold as a circular cutter machine, grinds through the section dry at high speed. It is cheaper to buy and leaves sparks, heat colours and grinding work behind.

It depends on the section. Tube, profile and thin wall are faster and cleaner on a circular saw machine. Heavy solid bar and batch cutting with automatic feed belong on a bandsaw. Tell us what you cut most often and we will say which design carries your work.

Look first at the largest section you cut, then at the material, the quantity and whether mitre cuts are routine. Varied single parts are well served by a manual machine. One length in volume points to an automated saw. Our specialists will name the size that matches your work.

Mild steel, alloy steel, stainless steel, cast iron and non-ferrous metals such as aluminium, brass and copper. Blade, cutting speed and coolant have to match the material. Hardened material does not belong on a circular saw machine and needs a different parting process.

Mild steel and structural work are cut with HSS blades. Stainless steel needs a finer tooth pitch and a lower cutting speed, and non-ferrous metals a different tooth geometry. Thin-walled tube wants many teeth in the cut, solid bar fewer and stronger ones. KNUTH supplies the matching blades.

Yes. Both KNUTH sizes swing to either side for mitre cuts. The angle is read on the scale and clamped on the swivel stop, so a repeated angle is easy to find again. For balustrades, gates and frames that is the reason to choose this machine over a straight-cut saw.

Yes. The machines are built and tested to European testing standards, and the technical documentation goes out with every machine. Further documentation for your safety file is provided on request.

Yes. A manual circular saw machine has few controls and is quick to explain, so apprentices learn feed, cutting speed and mitre setting on the machine itself. Nothing has to be programmed. We are glad to advise on the equipment for a training workshop.

Local service partners across the region cover the KNUTH range. Common spare parts come from our central stores, special parts direct from the manufacturers, and a ten-year spare parts availability guarantee applies to every machine. Current availability we confirm on request.

Circular saw machines for clean cuts in metal

A circular saw machine for metal parts tube, profile and solid bar with a toothed blade at low speed under coolant. The heat leaves with the chip, so the workpiece stays cool and the cut face is square with hardly any burr. The design is widely known as a cold saw, in some workshops as a round saw machine. KNUTH supplies manual circular saw machines in two sizes for small and medium sections.

Circular saw machine, cutting disc saw or bandsaw: the differences

Three machine types part metal, and each leaves a different result:

For a workshop cutting tube and profile all day the circular saw is faster and the face needs no dressing. Heavy solid material and repeat batches belong on a bandsaw. The industrial saws category sets out every design.

Manual or semi-automatic: choosing an industrial circular saw

These machines are grouped by how much of the cut they take over. A manual circular saw machine is fed on a hand lever, so the operator hears the cut and changes job without setting up. That suits repairs, single parts and short runs. A semi-automatic industrial circular saw adds hydraulic feed and pneumatic clamping, and it repays the cost once one length is needed in numbers. What KNUTH lists here is manual. Where the cutting runs in series, speak to us and we will check whether a bandsaw with automatic feed is the sounder investment.

Blades and materials

Nothing affects the cut more than the blade. Mild steel and structural work are cut with HSS blades. Stainless steel needs a finer tooth pitch and a slower cutting speed, non-ferrous metals such as aluminium, brass and copper a different tooth geometry again. Thin-walled tube wants many teeth in the cut, solid bar fewer and stronger teeth. Coolant and free chip flow protect blade and face. Matching circular saw blades and further accessories are available from KNUTH.

Applications and industries

Cutting capacity and machine sizes

Cutting capacity separates these machines first, meaning the largest section parted at square and on the mitre. Blade diameter, motor rating, cutting speed and fitted equipment follow: coolant pump, length stop and base stand. Both KNUTH sizes swing the head to either side, the angle read on the scale and clamped on the swivel stop. Capacities for the listed sizes appear in the product cards above.

Why KNUTH

KNUTH is an established supplier of machine tools, with a saw programme running from the circular saw through to the bandsaw. You also get straight advice on blades and equipment, at a fair price for the work they do.

Service, spare parts and availability

Local service partners across the region look after the KNUTH range, so support stays near the workshop. Common spare parts come from our central stores, special parts direct from the manufacturers, and a ten-year spare parts availability guarantee applies. Setting up, commissioning and operator instruction we offer as separate services. The detail is on start-up services and on repairs and spare parts.

Other sawing machines from KNUTH

Alongside circular saw machines KNUTH carries bandsaws. Mitre work in heavier sections goes to a horizontal mitre cutting bandsaw, plain cut-off to a horizontal straight cutting bandsaw. Contours and closed cutouts call for a vertical bandsaw.

Request an industrial circular saw from KNUTH

Which circular saw machine covers your sections and daily volume? Ask for a quote without obligation. Tell us the material, the largest section and the quantity, and we come back on any working day.

Request a quote

Item No.

You will receive price and delivery time by email. If we have questions about the equipment, we will call you first. Prefer to talk right away? +27-11-822-4610

Only for questions about your request.
Optional: details for a more accurate quote
For example required equipment or workpiece.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. You will receive price and delivery time by email. If we have questions, we will call you first.
  3. No email? Please check your spam folder.

In a hurry? Call us: +27-11-822-4610

Something went wrong

Please refresh the page and try submitting the form again.

Call

Request a Consultation

Our advisory team will get back to you personally on the same business day. Free and without obligation. Prefer to talk right away? +27-11-822-4610

Only for questions about your request.
For example machine, workpiece or material.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. An advisor will call you, usually on the same business day.
  3. No email? Please check your spam folder.

In a hurry? Call us: +27-11-822-4610

Something went wrong

Please refresh the page and try submitting the form again.