A tube end finishing machine prepares tube and section ends cleanly for the next step. KNUTH offers tube end finishing machines for steel fabrication, mining, oil and gas and heavy engineering: tube notchers in manual an…
A tube end finishing machine prepares tube and section ends cleanly for the next step. KNUTH offers tube end finishing machines for steel fabrication, mining, oil and gas and heavy engineering: tube n...
What is a tube end finishing machine and what is it used for?
A tube end finishing machine works the end of a tube so that it can be joined or welded cleanly. Typical tasks are notching, deburring and weld seam preparation. It is used in steel fabrication, mining, oil and gas and heavy engineering.
Which tube end finishing machine suits my business?
That depends on diameter, wall thickness, material and the required notch radius, as well as quantity. For individual parts and the workshop a manual tube notcher is enough, for recurring work a motorised version. Tell us your workpiece and we recommend the right tube end finishing machine.
Are the tube end finishing machines compliant?
The machines are built to European testing standards. The related documentation is available on request, so you can confirm the machine meets the requirements that apply to your operation.
Is a tube end finishing machine suitable for training and technical colleges?
Yes. A manual tube notcher with simple operation is well suited to training workshops where preparing and joining tube is taught. For a basic setup it combines with other metalworking machines.
How are service, spare parts and delivery time handled for a tube end finishing machine?
Service in South Africa runs through local service partners, with a base in Germiston near Johannesburg. Common spare parts come from the central warehouse, and a ten year spare parts supply commitment applies. Availability and delivery time are on request.
What does tube end finishing involve?
Tube end finishing covers notching the tube end to the required radius, deburring after sawing or notching, and weld seam preparation. The aim is a burr-free, dimensionally accurate and weld-ready tube end.
What is the difference between notching and deburring tube ends?
Notching cuts the tube end to the required radius so that two tubes meet accurately. Deburring then removes burrs and sharp edges. Both steps go together to produce a clean, weld-ready tube end.
Which tubes and materials can a tube end finishing machine work?
Mainly round tube and section in mild steel and stainless steel. The permitted diameter and wall thickness depend on the size of the machine and are listed with each machine in the product grid.
Are tube end finishing machines available in manual and motorised versions?
Yes. KNUTH offers tube notchers in a manual and a motorised version. The manual machine is quick to get running for individual parts, the motorised one works with more power and repeatability for frequent jobs. Which version fits is settled on request.
What does a tube end finishing machine cost?
Pricing is on request. The price depends on the process, the version and the working capacity, so there is no single list price. You receive a quotation per configuration. Send an enquiry.
What is a tube end finishing machine
A tube end finishing machine works the end of a tube or section so that it can be joined or welded cleanly. Typical tasks are notching at the required radius, deburring after sawing or notching, and weld seam preparation. The result is a burr-free, dimensionally accurate tube end of the kind steel fabrication, mining, oil and gas and heavy engineering rely on.
Tube end finishing processes
A clean tube end comes down to three steps, and KNUTH covers each with a suitable machine:
Notching: the tube end is cut to the required radius so that two tubes meet accurately. KNUTH offers dedicated tube notchers in a manual and a motorised version.
Deburring: after sawing or notching, burrs and sharp edges are removed from the tube end. This is safer to handle and the basis for a clean weld seam.
Weld seam preparation: the tube end is finished so that it welds safely and tightly.
The market also offers forming processes such as upsetting, reducing and expanding, as well as CNC-controlled systems. These processes are not part of the KNUTH range. Which of the machines on offer suits your tube is something we settle on request.
Materials, applications and industries
The machines mainly work round tube and section in mild steel and stainless steel. Diameter, wall thickness, material and the required notch radius decide which machine you reach for.
Typical work is in steel and metal fabrication with frames, railings and tube structures. In South Africa these machines also serve mining, oil and gas and heavy engineering, where tube frames and structures need burr-free, weld-ready ends.
Manual or motorised
The tube notchers come in a manual and a motorised version. The manual machine is simple and quick to get running and suits individual parts and the workshop. The motorised version works with more power and repeatability and suits recurring jobs. Which version fits your diameter and quantity is something we settle with you.
Why KNUTH, service and availability
KNUTH has stood for machine tools for more than 100 years. The ranges are selected with care. Service in South Africa runs through local service partners, with a base in Germiston near Johannesburg. Common spare parts come from the central warehouse, and a ten year spare parts supply commitment applies. Availability, delivery time and pricing are on request.