Workshop Presses

A workshop press is part of the basic equipment in every workshop and maintenance shop. It presses bearings, bushes and shafts in and out, straightens bent parts and supports assembly work that is beyond hand force.

read more

A workshop press is part of the basic equipment in every workshop and maintenance shop. It presses bearings, bushes and shafts in and out, straightens bent parts and supports assembly work that is bey...

read more
Call: +27-11-822-4610

Your KNUTH advisory team
Personal reply on the same working day.

  • Family-run since 1923Machine tools worldwide
  • Every machine testedbefore delivery
  • Machines in stockready in Johannesburg
  • Own service teamtechnicians across Africa

FAQ's

A workshop press is a hydraulic press in a sturdy H-frame for the workshop and maintenance. A ram presses the workpiece against a fixture or support. Typical jobs are pressing bearings, bushes and shafts in and out, straightening bent parts and assembly and disassembly work that is beyond hand force.

The press force follows the heaviest job, not the most frequent one. A few tonnes are enough for light assembly and small bearings, while heavy shafts, bushes and maintenance call for sizes in the double- to triple-digit tonnage range. Choose the tonnage with reserve, and the press stays usable for later jobs too.

The manual workshop press builds the pressure through a hand pump with a hand lever. It is rugged, low-maintenance and works without a mains connection, which suits occasional pressing work. The motorised workshop press builds the pressure through a hydraulic power unit. That takes strain off the operator, speeds up recurring work and reaches higher press forces.

Both work hydraulically, but they aim at different jobs. The workshop press is built for maintenance and assembly: pressing in and out, straightening and assembly in an H-frame. The hydraulic production press is designed for forming and series production, often with PLC control and an automatic sequence. For recurring forming jobs, KNUTH lists its own hydraulic presses.

The deciding factors are press force, working width and drive. For the small workshop with occasional pressing work a manual workshop press is enough. For maintenance with high throughput and heavy parts a motorised size with higher tonnage fits. Describe your typical workpieces and our specialists recommend the right size and equipment.

Every machine is quality-tested with documentation in Germany against European testing standards before it ships. The test documentation is available on request. Tell us what your site needs and we will supply the paperwork with the quotation.

Workshop presses usually run on a standard hydraulic oil to an ISO viscosity grade, often HLP 46. What always applies is the figure in the operating manual for the particular series. Check the oil level regularly and keep to the specified change intervals, as that secures a steady press force and protects the seals.

Common items are press mandrels in stepped diameters, pressure and support plates, V-blocks and prisms for straightening round parts, and bending attachments for bending sheet. Which accessories you need depends on your workpieces. The full range is in KNUTH machine accessories.

Yes. A workshop press is widely used in training and teaching workshops because it allows simple, clear jobs such as pressing in and out and straightening. Manual sizes are especially rugged and straightforward to operate. For higher safety in training, motorised series offer a two-hand or foot control depending on the equipment.

Service runs through local partners, with the regional base in Germiston near Johannesburg. Spare parts for a workshop press carry a supply guarantee of ten years. Commissioning and operator instruction are available as a separate service item.

Workshop presses for maintenance and assembly

The workshop press is part of the basic equipment in every repair and maintenance shop. It produces the force that hand tools no longer manage: pressing bearings, bushes and shafts in and out, straightening bent parts and handling general assembly work. The welded, double H-frame stands up to high pressure loads, and the height-adjustable support sets the working height to the workpiece. KNUTH lists workshop presses in manual and motorised versions and in several sizes.

Frame and drive: manual or motorised

Workshop presses from KNUTH work hydraulically in a sturdy H-frame. The drive sets the speed and the operation:

Workpieces are positioned under the hydraulic cylinder in purpose-made fixtures. The press force, working width and stroke of the machines currently available appear in the product cards above.

Applications in the workshop and maintenance

With the matching fixture a workshop press takes on a wide range of work:

Typical settings are mining, oil and gas and heavy engineering, plus general fabrication and fitting and repair shops. For industrial forming and series production, hydraulic presses are the right design.

Choosing the right press force and size

The press force is the most important selection criterion. It follows the heaviest job, not the most frequent one, and it moves the price more than anything else because frame, cylinder and pump all scale with it. Small workshop presses cover the range of a few tonnes, while large sizes reach up into triple-digit tonnage. Besides the tonnage, the working width between the uprights, the adjustable table for the working height and the stroke of the cylinder decide which workpieces fit. Landed cost in South Africa also carries freight, duties and commissioning, and we put all of it into one quotation. The exact figures for each series are in the product cards above. Pricing is on request.

Technical equipment and safety

The range of functions grows with the size. Common equipment features are:

Depending on the equipment, motorised series additionally offer an electric safety control, two-hand or foot control, an automatic return and adjustable settings for dwell time and piece count. Which operating and safety features a series carries is stated in the product cards above. We are glad to advise on the right equipment for your application.

Accessories for workshop presses

The accessories decide how much a workshop press can actually do:

Which accessories you need depends on your parts. The full range is under machine accessories.

Why KNUTH

KNUTH supplies machine tools across Sub-Saharan Africa and selects its press range itself. You get personal advice rather than a catalogue page, with matching accessories from the same source. Alongside the workshop presses for maintenance and assembly, KNUTH also lists hydraulic presses for production and forming; the presses category gives an overview of the full range.

Service, spare parts and availability

Service runs through local partners, with the regional base in Germiston near Johannesburg. Commissioning and operator instruction are available as a separate service item. Spare parts carry a supply guarantee of ten years. Press mandrels, V-blocks and other equipment are listed under machine accessories. See start-up services and repairs and spare parts. For a quotation on your workshop press, use the contact form.

More types:

Request a quote

Item No.

You will receive price and delivery time by email. If we have questions about the equipment, we will call you first. Prefer to talk right away? +27-11-822-4610

Only for questions about your request.
Optional: details for a more accurate quote
For example required equipment or workpiece.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. You will receive price and delivery time by email. If we have questions, we will call you first.
  3. No email? Please check your spam folder.

In a hurry? Call us: +27-11-822-4610

Something went wrong

Please refresh the page and try submitting the form again.

Call

Request a Consultation

Our advisory team will get back to you personally on the same business day. Free and without obligation. Prefer to talk right away? +27-11-822-4610

Only for questions about your request.
For example machine, workpiece or material.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. An advisor will call you, usually on the same business day.
  3. No email? Please check your spam folder.

In a hurry? Call us: +27-11-822-4610

Something went wrong

Please refresh the page and try submitting the form again.