Sinus 400/1500 D - Classic design with extensive standard equipment, including 3 axis read out, and taper turning

Sinus D 330/2000 shown

Rests ensure maximum precision when machining long workpieces

Rests ensure maximum precision when machining long workpieces

Support moves in linear and cross direction via rapid feed

Support moves in linear and cross direction via rapid feed

Taper turning unit is included

Taper turning unit is included

Sinus 400/1500 D - Classic design with extensive standard equipment, including 3 axis read out, and taper turning
Rests ensure maximum precision when machining long workpieces
Support moves in linear and cross direction via rapid feed
Taper turning unit is included

ENGINE LATHE

Sinus 400/1500 D

Item No. 300015
Turning diameter over bed
800 mm
Workpiece length (max.)
1.500 mm
Spindle bore
105 mm
Motor rating main drive
7,5 kW
  • Included: 3-axis position indicator X.Pos 3.2, 3-jaw chuck Ø 315 mm, 4-jaw face plate chuck Ø 400 mm all 18 items
Call

Free and without obligation. You will receive price and delivery time by email.

Data sheet (PDF)

Your KNUTH advisory team
Questions about accessories or installation?

Working area
Workpiece length (max.) 1.500 mm
Turning diameter over bed 800 mm
Turning-Ø over support 570 mm
Turning diameter without gap bridge 1.035 mm
Gap bridge length 330 mm
Bed width 400 mm
Travels
Travel X-axis 420 mm
Travel Z1-axis 230 mm
Swing range of top slide 70°
Headstock
Spindle speed 25 1/min - 1.600 1/min
Spindle bore 105 mm
Spindle mount D1-8
Spindle taper ø 113 mm/ 1:20
Rapid feed
Rapid feed X-axis 2.000 mm/min
Rapid feed Z-axis 4.000 mm/min
Feed
Feed X-axis 0,022 mm/R - 0,74 mm/R
Feed Z-axis 0,044 mm/R - 1,48 mm/R
Threading
Threading, metric 0,45 mm - 120 mm
Threading, diametric 0,88 DP - 160 DP
Threading, module 0,25 mm - 60 mm
Threading, whitworth (54) 7/16 - 80 TPI
Tailstock
Tailstock quill diameter 90 mm
Tailstock taper 5 MT
Tailstock quill stroke 235 mm
Tailstock traverse adjustment ± 11 mm
Drive capacity
Motor rating main drive 7,5 kW
Measures and weights
Overall dimensions (length x width x height) 3,24 m x 1,14 m x 1,91 m
Weight 3.220 kg

Sinus D is the largest series in the universal lathes segment. The construction follows a classic design but is based on a heavy, one-piece cast machine bed. As with heavy-duty lathes, the frictional connection between the motor and the spindle takes place via a manual multi-disc clutch. With integrated functions such as the removable bed bridge, rapid traverse and a taper turning device, this series offers optional solutions for machining long workpieces or large flanges.

  • One-piece heavy-duty cast bed for increased rigidity
  • Sturdy headstock design with large spindle bearings
  • Rapid feed on 2 axes for fast positioning
  • Taper turning attachment for additional applications
  • Well-designed safety functions

Machine bed

  • Maximum stability: The machine is based on a heavy, generously dimensioned bed on a solid, one-piece cast base frame, which effectively eliminates vibrations
  • Long-lasting accuracy: For lasting precision and low wear, the bed guideways are induction hardened and ground (>HB 400)

Headstock and feed gear

  • Precision under load: The design guarantees high accuracy and exceptionally smooth running, even at high cutting speeds
  • Large passage: With a spindle bore of 105 mm, the machine is ideally suited for machining long shafts and pipes
  • Proven drive: A mechanical multi-plate clutch ensures smooth spindle start-up – ideal for accelerating heavy workpieces

Support

  • Reduced non-productive times: To increase productivity, the support can be moved in both the longitudinal and transverse directions in rapid traverse
  • High operator protection: Integrated overload protection for the feed screw and lead screw prevents damage due to incorrect operation or collisions
  • Protected design: The lead screw is covered to minimise wear caused by chips and dirt

Tailstock

  • The tailstock quill is equipped with a robust and easy to read scale
  • The long quill stroke allows for complex drilling and centering jobs
  • The tailstock can be adjusted laterally for machining of conical shafts

Equipment and accessories

  • The central lubrication system on the support supplies all guideways with lubricant and simplifies machine maintenance
  • A taper turning device is included as standard and enables the production of long, slim external and internal tapers in a single pass with automatic longitudinal feed
  • Since neither the upper slide nor the tailstock need to be adjusted, quick changing between cylindrical and taper turning is a major advantage
  • The standard foot brake pedal is not only practical, but also a safety feature
  • The large and stable splash guard at the rear of the machine ensures a clean machine environment
  • Bright LED lighting is integrated into the support cover and illuminates the working area optimally
  • The multifunctional quick-change tool holder system with a change cassette is standard equipment in this series
  • A fixed and a travelling steady rest are also standard accessories, indispensable for long workpieces
  • The series is equipped with the latest generation of our position indicators as standard. Higher working accuracy, a lower error rate and increased production reliability pay off
  • A coolant system and extensive operating tools complete the equipment package

3-axis position indicator X.Pos 3.2 Item No.
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • The optical scales provide 5 micron resolution (0.005 mm) with outside cover from aluminum for protection against oil, coolant and chips.

Basic Functions

  • Resolution of 0,005 mm
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function
3-axis position indicator X.Pos 3.2
3-axis position indicator X.Pos 3.2 Item No.
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • The optical scales provide 5 micron resolution (0.005 mm) with outside cover from aluminum for protection against oil, coolant and chips.

Basic Functions

  • Resolution of 0,005 mm
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function
3-jaw chuck Ø 315 mm
3-jaw chuck Ø 315 mm Item No.
  • self-centering 3 jaw chuck
  • size of Ø 315 mm
  • made of cast iron
  • delivered with one set of hard jaws
4-jaw face plate chuck Ø 400 mm
4-jaw face plate chuck Ø 400 mm Item No.
  • independent 4 jaw chuck 
  • size of Ø 400 mm
  • made of cast iron
  • delivered with one set of hard jaws
Face plate Ø 500 mm
Face plate Ø 500 mm Item No.

Face plate diam. Ø500 mm

Drive plate
Drive plate Item No.
Quick tool changer head WD
Quick tool changer head WD Item No.

High quality German type quick change tool holder to easily switch the tools with a repeat accuracy of 0,01 mm.

Quick change tool holder WD1D 40180
Quick change tool holder WD1D 40180 Item No.
  • Tool holder WD1D 40180
  • Side 40×180 mm
Fixed splash guard (wall)
Fixed splash guard (wall) Item No.
Coolant system
Coolant system Item No.
Steady and follow rests
Steady and follow rests Item No.
  • Steady rest - max. workpiece diameter: Ø200 mm
  • Follow rest - max. workkpiece diameter: Ø130 mm
Taper turning unit
Taper turning unit Item No.
Chuck guard
Chuck guard Item No.

Chuck guard with integrated interlock system

LED work light
LED work light Item No.
Reducing sleeve
Reducing sleeve Item No.
Dead center
Dead center Item No.
Tool kit
Tool kit Item No.
Operating manual
Operating manual Item No.
Rapid feed on Z and X axes
Rapid feed on Z and X axes Item No.

3-axis position indicator X.Pos 3.2

  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • The optical scales provide 5 micron resolution (0.005 mm) with outside cover from aluminum for protection against oil, coolant and chips.

Basic Functions

  • Resolution of 0,005 mm
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function

Resources & Downloads

Matching Accessories

Discover matching accessories for this machine.

Similar Products

Not sure which machine fits?

Our experts advise you free of charge on selection, equipment and accessories.

+27-11-822-4610

Request a quote

Sinus 400/1500 D - Classic design with extensive standard equipment, including 3 axis read out, and taper turning
Sinus 400/1500 D
Item No. 300015

You will receive price and delivery time by email. If we have questions about the equipment, we will call you first. Prefer to talk right away? +27-11-822-4610

Only for questions about your request.
Optional: details for a more accurate quote
For example required equipment or workpiece.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. You will receive price and delivery time by email. If we have questions, we will call you first.
  3. No email? Please check your spam folder.

In a hurry? Call us: +27-11-822-4610

Something went wrong

Please refresh the page and try submitting the form again.

Call

Request a Consultation

Our advisory team will get back to you personally on the same business day. Free and without obligation. Prefer to talk right away? +27-11-822-4610

Only for questions about your request.
For example machine, workpiece or material.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. An advisor will call you, usually on the same business day.
  3. No email? Please check your spam folder.

In a hurry? Call us: +27-11-822-4610

Something went wrong

Please refresh the page and try submitting the form again.