An edge beveling machine cuts a clean, defined bevel onto the edge of plates, tubes and profiles. Typical jobs are chamfering for weld seam preparation, deburring and breaking sharp edges. KNUTH offer...
What is an edge beveling machine and what is it used for?
An edge beveling machine uses a cutter head to mill an even bevel onto the edge of a workpiece. It is used above all for weld seam preparation, deburring and edge breaking on plates, tubes and profiles.
Which edge beveling machine suits my operation?
It depends mainly on the size of the workpiece, the material and the bevel you need. For large or heavy parts in mining or heavy engineering a hand-guided edge beveling machine is ideal, for repeat bevels on smaller parts a stationary one. Tell us your work and we will recommend the right machine.
Do KNUTH edge beveling machines meet compliance requirements?
KNUTH edge beveling machines are documented and built to European testing standards. Compliance documentation is available on request for your market.
Is an edge beveling machine suitable for training and the teaching workshop?
Yes. The simple operation and the immediate readiness for use make the hand-guided edge beveling machine well suited to teaching workshops where chamfering and weld seam preparation are taught. For a basic set-up it combines with other sheet metal machines.
How are service, spare parts and delivery time handled for a KNUTH edge beveling machine?
Service is provided through local service partners. Common spare parts and indexable inserts come from the central warehouse, and a ten-year spare parts supply guarantee applies. We will tell you the availability and delivery time of a particular edge beveling machine on request.
What is the difference between a hand-guided and a stationary edge beveling machine?
A hand-guided edge beveling machine is moved along the workpiece and suits large, heavy or awkward parts on site. A stationary edge beveling machine has a fixed set-up and gives consistent results on repeat bevels on smaller parts.
How do I set the bevel angle and bevel width on an edge beveling machine?
You set the bevel angle and bevel height to match the weld groove and the material thickness. Because the cutter head mills the edge rather than grinding it, the bevel stays even and repeatable over the full length.
Which metals can an edge beveling machine process?
It works the usual metals of metal fabrication such as mild steel, stainless steel and aluminium. How thick the material can be depends on the size of the edge beveling machine.
What tool does an edge beveling machine use?
An edge beveling machine works with a cutter head fitted with indexable inserts. The cutting edges are made of a hard carbide alloy for long tool life. When a cutting edge is worn, the insert is turned or changed.
How much does an edge beveling machine cost?
The price depends on the machine size, whether it is hand-guided or stationary, the bevel range and the tooling. KNUTH quotes each edge beveling machine per configuration, so tell us your parts and requirements and we will send pricing on request.
What is an edge beveling machine?
An edge beveling machine mills an even bevel onto the edge of a workpiece. The process is also called chamfering. A cutter head with several inserts removes material from the edge in a controlled way, so a clean bevel is produced at a constant angle and width. Edge beveling machines are used above all for weld seam preparation, for deburring and for breaking edges on plates, tubes and profiles.
Before welding, the edge has to be bevelled so the weld joins the parts reliably. That is exactly what the edge beveling machine is built for. Other typical jobs:
Weld seam preparation: a defined bevel on the plate edge for a load-bearing welded joint.
Deburring and edge breaking: safely removing sharp edges after cutting or flame cutting.
Chamfering large parts: long profiles, wide plates and welded structures are worked directly on the part, which matters for heavy fabrication.
Types: hand-guided and stationary
KNUTH offers hand-guided and stationary edge beveling machines:
Hand-guided edge beveling machines are moved along the workpiece by hand. They are compact, ready to use straight away and ideal for large or heavy parts that are hard to move on site.
Stationary edge beveling machines have a fixed set-up and suit repeat bevels on smaller parts at consistent quality.
Bevel angle, bevel width and bevel quality
The bevel angle and the bevel height decide the result. You set both to match the weld groove and the material thickness. Because the cutter head mills the edge rather than grinding it, the bevel stays even and repeatable over the full length. The milling action runs with low impact and low vibration, so the edge is clean and needs no rework.
Cutter head and indexable inserts
The tool of the edge beveling machine is a cutter head fitted with indexable inserts. The cutting edges are made of a hard carbide alloy and therefore reach long tool life. When a cutting edge is worn, you turn or change the insert instead of replacing the whole tool. That keeps running costs low and bevel quality constant.
Which materials and workpieces can be processed?
Edge beveling machines work the usual metals of metal fabrication: mild steel, stainless steel, aluminium and other materials. They bevel straight edges on plates, sheets, long profiles and welded structures. How thick the material and how large the part can be depends on the size of the machine. The exact figures are shown for each machine in the product grid above.
Applications and industries
Edge beveling machines are used wherever edges are prepared for welding or deburred, and they are a fit for the heavy industries of the region:
Mining and mineral processing
Oil and gas
Heavy engineering and steel fabrication
Tank, vessel and plant construction
Repair, maintenance and welding shops
Why KNUTH
KNUTH has stood for machine tools for over 100 years. We select the series carefully. You get tested quality at a fair price-performance ratio, without compromising on safety, backed by local service partners. You will find machines for further steps in Sheet Metal Processing and among the Saws.
Service, spare parts and availability
Local service partners look after service in the region. Common spare parts and indexable inserts come from our central warehouse, and a ten-year spare parts supply guarantee applies. Whether a particular edge beveling machine is available and how quickly it can be delivered, we will tell you on request.