Horizontal Mitre Cutting Bandsaws

Horizontal mitre cutting bandsaws cut bars, profiles, tubes and beams at an angle and in straight cuts.

read more

Horizontal mitre cutting bandsaws cut bars, profiles, tubes and beams at an angle and in straight cuts. The horizontal design guides the saw band steadily and delivers clean cut faces, even at demandi...

read more
Call: +27-11-822-4610

Your KNUTH advisory team
Personal reply on the same working day.

  • Family-run since 1923Machine tools worldwide
  • Every machine testedbefore delivery
  • Machines in stockready in Johannesburg
  • Own service teamtechnicians across Africa

Not sure which machine fits?

Our experts advise you free of charge on selection, equipment and accessories.

+27-11-822-4610

FAQ's

A horizontal mitre cutting bandsaw cuts bars, profiles, tubes and beams at an adjustable mitre angle or in a straight cut. It is used in steel and metal fabrication and across mining, oil and gas and heavy engineering.

That depends on your workpiece range, quantity and the automation you need. For one-off work and repair a manual or semi-automatic mitre bandsaw is enough, for recurring series a fully automatic series with NC control. We advise on the right machine size.

Yes. Every mitre bandsaw is documented and tested to European testing standards, with documentation available on request.

Yes. Manual and semi-automatic mitre bandsaws are clear to operate and suit training workshops in metalworking. For higher quantities you can move to an automated series later.

We work with local service partners for running operation. Common spare parts come from the central warehouse, and a ten-year spare parts availability guarantee applies.

A single-mitre saw swivels the saw bow to one side. A double-mitre bandsaw swivels to both sides and saves re-clamping when mitre angles change, which saves time in frame and profile production.

The swivel range depends on the series. Many models cut wide mitre angles, and double-mitre saws cut to both sides. The exact range is stated on the data sheet of the respective machine.

On the manual saw the operator guides the cut. The semi-automatic saw works with hydraulic bow feed and clamping. The fully automatic saw feeds the material itself via a magazine and suits series work.

Horizontal mitre cutting bandsaws cut steel, stainless steel and non-ferrous metals as solid material, tube or profile. The right saw band with a tooth pitch matched to the material is decisive for cut quality and tool life.

We supply saw blades in various tooth pitches as well as roller conveyors for feeding and removing long workpieces. The right saw band depends on material and cross section, and roller conveyors ensure repeatable lengths.

Designs of horizontal mitre cutting bandsaws

Horizontal mitre cutting bandsaws come in several designs. They differ in rigidity, cutting geometry and suitability for series work. KNUTH supplies the common designs for workshop, steel fabrication and heavy engineering.

An important distinction is single versus double mitre. A single-mitre saw swivels to one side. A double-mitre saw swivels the bow to both sides and saves re-clamping when angles change.

Mitre cuts, angles and applications

The mitre cut separates the workpiece not at a right angle but at a set angle. This is standard in steel and metal fabrication and across mining, oil and gas and heavy engineering, wherever frames, tubular structures and profile joints are made. Typical workpieces are bars, tubes, angle steel, square tubes, H-beams and profiles in steel, stainless steel and non-ferrous metals. Depending on the series the bow swivels for different mitre angles, many models to both sides.

Levels of automation: from the manual saw to the sawing automaton

The level of automation determines throughput and operating effort. KNUTH covers the full range.

  1. Manual: the operator guides the cut, ideal for single parts, repair and changing tasks.
  2. Semi-automatic: hydraulic bow feed and hydraulic clamping, the operator loads and starts the cycle.
  3. Fully automatic: automatic material feed via a bar magazine for series with consistent length.
  4. NC control: the highest level controls length, quantity and cut sequence by program. A pure CNC mitre bandsaw is not part of the range.

Which mitre bandsaw suits your production

The choice depends on workpiece range, quantity and the automation you need. For one-off work and repair a manual or semi-automatic machine is enough. For recurring series with tight tolerances a fully automatic series with NC control pays off. If you mostly run straight cuts without mitre, the right machine is among the horizontal straight cutting bandsaws. For cut-outs and contours in the workpiece, vertical bandsaws are suitable, and for clean cuts in solid material and profiles the circular sawing machines.

Saw bands, accessories and material handling

The saw band is the wear part with the greatest influence on cut quality and tool life. Tooth pitch and band type are matched to material and cross section. Suitable saw blades and accessories are part of our programme. For longer workpieces, roller conveyors ensure safe feeding and repeatable lengths.

Why KNUTH

KNUTH is a supplier of machine tools with its own inspection. You receive European quality without the European price, together with advice on the right machine size and support through local service partners.

Service, spare parts and availability

For running operation we work with local service partners and a spare parts supply from our central warehouse, with special parts sourced directly from the manufacturers. A ten-year spare parts availability guarantee applies. Tell us your workpiece range, the automation you want and your batch size, and we will get back to you promptly on any working day with a recommendation. Request pricing.

Request a quote

Item No.

You will receive price and delivery time by email. If we have questions about the equipment, we will call you first. Prefer to talk right away? +27-11-822-4610

Only for questions about your request.
Optional: details for a more accurate quote
For example required equipment or workpiece.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. You will receive price and delivery time by email. If we have questions, we will call you first.
  3. No email? Please check your spam folder.

In a hurry? Call us: +27-11-822-4610

Something went wrong

Please refresh the page and try submitting the form again.

Call

Request a Consultation

Our advisory team will get back to you personally on the same business day. Free and without obligation. Prefer to talk right away? +27-11-822-4610

Only for questions about your request.
For example machine, workpiece or material.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. An advisor will call you, usually on the same business day.
  3. No email? Please check your spam folder.

In a hurry? Call us: +27-11-822-4610

Something went wrong

Please refresh the page and try submitting the form again.