A press brake bends sheet metal and plate by pressing a punch into a die; the stroke depth sets the bending angle. KNUTH supplies the AHK M NC series as a compact, well-equipped NC press brake and the...
Enter sheet thickness and length – see matching models.
Required press force: –
Guide value for air bending – how we calculate
Press force = 1.42 × tensile strength × sheet thickness² × bending length ÷ V opening. The smaller the die, the higher the force and the shorter the flange may be. “Automatic” uses the usual die for your sheet thickness. The suggested models include a 15% force reserve. We are happy to recalculate for your part.
All models
Sheet thickness: guide value over the full length.
* Guide value based on the rule of thumb V = 8 × sheet thickness, over the full length: mild steel up to 450 N/mm², stainless steel up to 700 N/mm². The actual value depends on tooling and material.
Equipment
standard + optional extra
AHK M NC
AHK V CNC
Control
NC touchscreen, 500 programs
CNC Delem DA-53T with graphics
+Delem DA58, DA66T or DA69T (3D)
Back gaugesets the flange length
2 axes: forward/back, up/down
+Longer travel, more gauge fingers
1 axis: forward/back
+2 or 4 axes
+Longer travel, more gauge fingers
Crowningsame angle over the full length
+Motorised
Motorised (AHK V 13040: option)
Tooling
Upper and lower tool (4 V openings), quick clamping
Upper and lower tool, hardened and ground
+Upper tool 105 mm high for deep boxes
European tool holder (Promecam) – standard tools fit.
Safety
Light curtains
AHK M 1230 also with AKAS laser guard
AKAS laser guard at the tool, rear light barrier
Operation
2 support arms, foot switch with emergency stop
2 support arms, foot switch, ECO mode
+Energy-saving drive, more support arms, control cabinet air conditioning
FAQ's
What is a press brake and where is it used in South Africa?
A press brake bends sheet and plate. A punch presses the workpiece into a die to form a defined edge, and the depth of the stroke sets the bending angle. Press brakes are used for guards, ducting, enclosures and fabricated parts across mining, oil and gas fabrication, heavy engineering, HVAC and general fabrication shops.
How does a press brake work?
The sheet rests on the die, the punch comes down and presses it into the die opening. In air bending, the usual method, the punch enters only far enough to form the required angle. The deeper the punch goes, the sharper the angle, so any obtuse bending angle can be set without a tool change.
What is the difference between a conventional and a CNC press brake?
On a conventional press brake the stop and bending depth are set by hand, which is robust and economical for simple edges and short runs. A CNC press brake drives the back gauge, force and bending angle from a programme, cutting setting time and securing repeatability on complex parts and larger batches.
What is the difference between a press brake, a bending press and a folding machine?
Press brake and bending press, also called a die bending machine, are names for the same machine: a punch presses the sheet into a die. A folding machine is different, clamping the sheet and swinging a beam up to raise the flange. For die bending with punch and die, the press brake is the right machine.
What does crowning mean on a press brake?
Under load the press beam deflects slightly, so the bending angle can come out different in the centre than at the ends. Crowning compensates for that deflection so the angle stays even over the full bending length. On CNC press brakes crowning is controlled automatically, which keeps results even on long edges.
Which press brake suits my workshop?
The key factors are bending length, force and control. The bending length must match the longest edge, and the force must match the combination of plate thickness and grade. Simple, repeating bends are handled by a conventional press brake, while complex profiles and higher volumes call for a CNC press brake. Describe your work and we will recommend the right size.
What tooling does a press brake need?
A press brake works with an upper tool, the punch, and a die. The punch sets the radius and form of the edge, and the die V-opening is matched to the plate thickness. Special tooling covers tight or multi-bend profiles, and quick-clamping systems speed up the tool change. Matching tooling and dies are available from KNUTH.
Do KNUTH press brakes meet European testing standards?
Yes. Every machine is given a documented inspection to European testing standards before despatch, with the documentation available on request. Marking and paperwork are confirmed for the South African market when the machine is quoted.
Are press brakes suitable for technical colleges and apprentice workshops?
Yes. Conventional press brakes are common in colleges and apprentice workshops, because they show sheet metal bending clearly with manageable operation. For training on modern control technology, CNC press brakes let apprentices practise programming and repeatability. We advise on guarding and the right machine size.
How are service and spare parts handled for press brakes in South Africa?
Commissioning, servicing and repairs run through local service partners, with parts supply and technical backing from Germany behind them. A ten year spare parts supply commitment applies company wide. Commissioning and operator instruction for your team are available as a separate service, and pricing for a machine is given on request.
Press brakes in the KNUTH sheet metal range
A press brake, also called a bending press or die bending machine, is the central machine for bending sheet and plate. A punch presses the workpiece into a die to form a defined edge, and the depth of the stroke sets the bending angle, from a single flange to a multi-bend profile. That is how enclosures, guards, ducting and fabricated parts are made across metal fabrication, mining and heavy engineering. KNUTH supplies press brakes in conventional and CNC versions and in several machine sizes.
How a press brake works: punch and die
The sheet rests on the die, the punch comes down and presses it into the die opening. The common method is air bending: the punch enters only far enough to form the required angle, without pressing the sheet fully home. Working through the stroke depth, the machine sets any obtuse angle. Two factors govern the accuracy:
Crowning: the press beam deflects slightly under load, and crowning compensates for that deflection so the bending angle stays even over the full length.
Angle measurement: CNC press brakes measure and correct the angle during the bend, which gives high repeatability.
The bending length you can achieve and the force you need depend on plate thickness and grade. The rated values for the machines currently on offer are shown on the product cards above.
Conventional or CNC press brake: which one to choose
KNUTH press brakes are hydraulic, and the control sets them apart:
Conventional press brake: the stop and bending depth are set by hand. Robust, simple to operate and economical for straightforward edges and short runs.
CNC press brake: a control system drives the back gauge, force and bending angle from a programme. That cuts setting time, secures repeatability and suits complex parts and larger batches.
As a rule, simple and repeating bends favour the conventional machine, while complex profiles and higher volumes favour the CNC press brake.
Technical features and machine sizes
Two figures govern the choice. The bending length must match the longest workpiece edge, and the bending force must match the combination of plate thickness and grade. As a guide, heavier plate and longer edges call for more force. KNUTH supplies press brakes from the compact workshop size through to the long, heavy CNC machine for structural and heavy fabrication. Further features include the programmable back gauge for accurate positioning, crowning for even angles and guarding to protect the operator. The exact values for each series are given on the product cards above.
Tooling and dies
The result from a press brake depends on the tooling. Punch and die decide the angles and radii you can achieve:
Punches (upper tools) in various tip radii and forms, including tooling for tight and multi-bend profiles
Dies with different V-openings to match the plate thickness
Quick-clamping systems for a fast tool change
Which tooling you need follows from your plate and your bends. Matching tooling and accessories are quoted alongside the machine.
Industries in South Africa and the region
The press brake is at work across sheet metal and plate fabrication. Typical work and sectors include:
Guards, chutes, ducting and fabricated structures in mining and materials handling
Vessels, panels and formed plate in oil, gas and heavy engineering
Enclosures, brackets and folded parts in general fabrication, HVAC and switchgear
KNUTH has supplied machine tools since 1923 and acts as a supplier, not a machine builder. Series are selected and given a documented inspection before despatch, with the documentation available on request. You get advice on the right bending length, force and tooling rather than a bare catalogue choice, plus tooling and accessories from one source. The regional base at Germiston near Johannesburg looks after the market with sales, technical advice and parts. Pricing follows working length, thickness class, control level and tooling, so every machine is quoted on its own.
Service, spare parts and delivery
Commissioning, servicing and repairs run through local service partners. A ten year spare parts supply commitment applies company wide. Installation and operator training can be arranged on request, with the scope and delivery time set out in the quotation. Reach us through the contact page for pricing, availability or a recommendation on machine size.