Belt & Disk Sanders

Belt and disc sanders are the fast solution for deburring and for edge and surface grinding of metal workpieces.

read more

Belt and disc sanders are the fast solution for deburring and for edge and surface grinding of metal workpieces. The belt removes material evenly across larger surfaces, while the disc works precisely...

read more
Call: +49 4321 609-0

Your KNUTH advisory team
Personal reply on the same working day.

  • Family-run since 1923Machine tools worldwide
  • Every machine testedin Germany before shipping
  • 1,000 machines in stockmany available quickly
  • Own service teamtechnicians from Germany

Not sure which machine fits?

Our experts advise you free of charge on selection, equipment and accessories.

+49 4321 609-0

FAQ's

A belt and disc sander combines two grinding methods in one unit. The continuous sanding belt removes material across larger surfaces, while the rotating disc works precisely on edges and radii. It is used mainly for deburring and surface work on metal.

Belt grinding suits surfaces, flat stock and longer edges, because the belt removes material evenly across large areas. Disc grinding delivers precise results on edges, curves and radii, because the disc offers a stable grinding surface. Combined, they cover both tasks.

Yes. The KNUTH range is designed for metalworking, mainly steel, stainless steel and non-ferrous metals. Through the grit of the sanding belt and the disc you control the result, from heavy stock removal to a fine finish.

A double grinder, also called a bench grinder, is a workshop machine with two grinding stations, classic for sharpening, deburring and chamfering. Models with electronically variable speed match the cutting speed to the material. It is one of the most widely used grinding machines in metal workshops.

Mainly metal fabrication, structural steelwork, maintenance and training workshops. Wherever deburring, chamfering and reworking happen regularly, the machine replaces laborious hand work and delivers reproducible results.

For continuous use and in training workshops, dust extraction makes sense because it keeps grinding dust out of the workshop. KNUTH offers versions with integrated extraction. Which machine has extraction is shown in the product cards, or ask us directly.

KNUTH stocks the matching consumables separately, including sanding belts as well as discs and disc abrasives in common sizes and grits. Standard qualities are usually available from stock at short notice.

KNUTH supplies new machines with warranty, advice and service. Used machines are cheaper but often bring unknown wear and no manufacturer support. For regular use, a new machine is usually the more economical choice.

Many machines are available from stock at short notice. The exact delivery time depends on the model and equipment. Ask about availability for your preferred machine directly.

Yes. We advise on the machine, abrasives and accessories, handle commissioning and training, and offer repair and spare parts service. That keeps your machine ready for operation over the long term.

Belt and disc sanders for metalworking

A belt and disc sander is one of the fastest tools for deburring and for edge and surface grinding of metal. It combines two grinding methods in one machine and covers a broad range of tasks. KNUTH supplies robust machines for metal fabrication, structural steelwork, maintenance and technical training, from the compact workshop unit to versions with dust extraction.

Belt grinding and disc grinding: the difference

Both methods complement each other and can be combined on many machines:

Combining both methods in one machine increases versatility and shortens set-up times.

Typical applications

Designs at KNUTH

Different designs suit different workshops and grinding tasks:

You will find the exact equipment and dimensions of the currently available machines in the product cards above.

Which materials are suitable?

Belt and disc sanders mainly work steel, stainless steel and non-ferrous metals. Through the grit of the sanding belt and the disc you control the result, from heavy stock removal to a fine finish. A consistent surface depends on the right combination of abrasive and cutting speed.

Who benefits from the machine?

A dedicated belt and disc sander saves time wherever deburring and reworking happen regularly: in metal fabrication, structural steelwork, maintenance and training workshops. It replaces laborious hand work, delivers reproducible edges and keeps the workshop clean where dust extraction is fitted.

Why KNUTH

KNUTH is an established supplier of machine tools with a broad grinding range. You get quality tested to European standards and CE compliance, a well-considered product range and personal advice. Around 1,000 machines are available from our European stock in Wasbek, along with matching sanding belts and disc abrasives. That gives you a durable grinding solution from a single source.

Sanding belts and abrasives

KNUTH stocks the matching consumables separately, including sanding belts as well as discs and disc abrasives in common sizes and grits. Standard qualities are usually available from stock at short notice. You will find the full grinding programme in the grinding machines category.

Service: commissioning, training and spare parts

We support you with installation and commissioning and train your team on the operation of the machine. Our technical support and repair service cover the entire KNUTH range. The spare parts store ships most components quickly. You will find details on start-up services and the repair service on the service pages.

Related grinding categories

Besides belt and disc sanders, KNUTH offers further grinding machines for metalworking. For sharpening cutting tools, tool grinders are suitable. For surface and cylindrical grinding, consider conventional grinding machines. The grinding machines category gives an overview.

Request a belt and disc sander from KNUTH

Would you like to know which belt and disc sander suits your workpieces? Request a non-binding quote. Our specialists advise you on the machine, abrasives and accessories and usually get back to you within one working day.

Request a quote

Item No.

You will receive price and delivery time by email. If we have questions about the equipment, we will call you first. Prefer to talk right away? +49 4321 609-0

Only for questions about your request.
Optional: details for a more accurate quote
For example required equipment or workpiece.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. You will receive price and delivery time by email. If we have questions, we will call you first.
  3. No email? Please check your spam folder.

In a hurry? Call us: +49 4321 609-0

Something went wrong

Please refresh the page and try submitting the form again.

Call

Request a Consultation

Our advisory team will get back to you personally on the same business day. Free and without obligation. Prefer to talk right away? +49 4321 609-0

Only for questions about your request.
For example machine, workpiece or material.

By submitting, you agree to the processing of your data in accordance with our privacy policy.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you!

We have received your request. Here is what happens next:

  1. You will shortly receive a confirmation at
  2. An advisor will call you, usually on the same business day.
  3. No email? Please check your spam folder.

In a hurry? Call us: +49 4321 609-0

Something went wrong

Please refresh the page and try submitting the form again.