Guillotine Machines and Shears for Sheet Metal

A guillotine machine shears sheet metal along a straight line: the upper blade closes against a fixed lower blade while the hold-down clamps the plate.

read more

A guillotine machine shears sheet metal along a straight line: the upper blade closes against a fixed lower blade while the hold-down clamps the plate. KNUTH supplies manual guillotines for thin sheet...

read more
Call: +27-11-822-4610

Your KNUTH advisory team
Personal reply on the same working day.

  • Family-run since 1923Machine tools worldwide
  • Every machine testedbefore delivery
  • Machines in stockready in Johannesburg
  • Own service teamtechnicians across Africa

Selection guide

Enter sheet thickness and cutting length – see matching models.

– matching models

    Maximum values as per data sheet.

    All models

    Sheet thickness: maximum value over the full cutting length.

    ModelCutting lengthSteel
    max.
    Stainless
    max.
    Back gaugeRake angleStrokes
    per minute
    Weight
    Manual guillotine shear
    KHS E 1000 1,040 mm 1.5 mm – 580 mm – – 460 kg
    KMT B – motorised, manual back gauge
    KMT B 1253 1,250 mm 0.8–3 mm – 630 mm 2° – 850 kg
    KMT B 1254 1,250 mm 0.8–4 mm – 630 mm 2.4° – 1,185 kg
    KMT B 2053 2,050 mm 0.8–3 mm – 630 mm 2° – 1,520 kg
    KMT M – motorised, guided blade beam
    KMT M 1303 1,360 mm 3 mm 1.5 mm 750 mm 2° 35 1,250 kg
    KMT M 1503 1,560 mm 3 mm 1.5 mm 750 mm 2° 35 1,500 kg
    KMT M 2003 2,060 mm 3 mm 1.5 mm 750 mm 1.3° 35 1,750 kg
    KMT RNC – motorised, NC back gauge
    KMT RNC 1505 1,560 mm 5 mm 2.5 mm 750 mm 2° 31 2,600 kg
    KMT RNC 2004 2,060 mm 4 mm 2 mm 750 mm 1.3° 31 3,100 kg
    KMT RNC 2504 2,560 mm 4 mm 2 mm 750 mm 1.3° 31 3,500 kg
    KMT RNC 3004 3,060 mm 4 mm 2 mm 750 mm 1.3° 31 4,100 kg
    KHT M NC – hydraulic, NC back gauge
    KHT 2006 M NC 2,000 mm 6 mm 4 mm 1,000 mm 1.5° 20 4,500 kg
    KHT 2506 M NC 2,500 mm 6 mm 4 mm 1,000 mm 1.5° 18 5,000 kg
    KHT 3006 M NC 3,200 mm 6 mm 4 mm 1,000 mm 1.5° 14 6,700 kg
    KHT 3008 M NC 3,200 mm 8 mm 5 mm 1,000 mm 1.5° 10 8,300 kg
    KHT 3010 M NC 3,200 mm 10 mm 6 mm 1,000 mm 1.5° 8 8,500 kg
    KHT 3012 M NC 3,200 mm 12 mm 8 mm 1,000 mm 1.5° 10 10,800 kg
    KHT 4006 M NC 4,000 mm 6 mm 4 mm 1,000 mm 1.5° 12 8,600 kg
    KHT 4008 M NC 4,000 mm 8 mm 5 mm 1,000 mm 1.5° 8 9,700 kg
    KHT 4010 M NC 4,000 mm 10 mm 6 mm 1,000 mm 1.5° 8 10,000 kg
    KHT 4012 M NC 4,000 mm 12 mm 8 mm 1,000 mm 1.5° 10 13,200 kg
    KHT V CNC – hydraulic, CNC
    KHT V 3006 CNC 3,050 mm 6 mm 4 mm 1,000 mm 0.5–2° 12–20 7,800 kg
    KHT V 3010 CNC 3,050 mm 10 mm 6 mm 1,000 mm 0.5–2° 10–19 9,600 kg
    KHT V 3013 CNC 3,050 mm 13 mm 8 mm 1,000 mm 0.5–2° 9–17 11,500 kg
    KHT V 3016 CNC 3,050 mm 16 mm 10 mm 1,000 mm 0.5–2° 7–12 18,500 kg
    KHT V 3020 CNC 3,050 mm 20 mm 13 mm 1,000 mm 0.5–2° 5–12 21,000 kg
    KHT V 4006 CNC 4,100 mm 6 mm 4 mm 1,000 mm 0.5–2° 10–19 11,200 kg
    KHT V 4010 CNC 4,100 mm 10 mm 6 mm 1,000 mm 0.5–2° 8–17 15,000 kg
    KHT V 4013 CNC 4,100 mm 13 mm 8 mm 1,000 mm 0.5–2° 7–13 17,000 kg
    KHT V 4016 CNC 4,100 mm 16 mm 10 mm 1,000 mm 0.5–2° 5–19 22,000 kg
    KHT V 4020 CNC 4,100 mm 20 mm 13 mm 1,000 mm 0.5–2° 4–8 28,000 kg
    Special machine
    KHT H 3010 CNC 3,080 mm 10 mm 6 mm 1,000 mm 0.3–2° 17 9,300 kg

    Steel up to 450 N/mm², stainless steel up to 700 N/mm².

    Equipment

    standard    optional at extra cost

    Manual (KHS E)
    Motorised (KMT)
    Hydraulic (KHT)
    Cutting

    Cast frame with counterweight

    KMT M, RNC: guided blade beam

    KMT B: small rake angle

    KHT M NC: swing beam

    KHT V CNC: adjustable rake angle

    Back gaugesets the strip width

    Length stop with handwheel

    KMT B, M: manual, with display

    KMT RNC: NC, up to 750 mm

    KMT M: motorised 750/1,000 mm · RNC: 1,000 mm

    Automatic, up to 1,000 mm

    Estun E21 (M NC) · Cybelec Touch 8 (V CNC)

    Blade gapmatched to sheet thickness

    –

    KMT RNC: manually adjustable

    KHT M NC: manually adjustable

    KHT V CNC: gap and angle automatic

    Blades

    Hardened

    KMT M, RNC: for stainless steel, multiple reversible

    KMT M, RNC: second set of blades

    For stainless steel · V CNC: multiple reversible

    KHT M NC: second set of blades

    Sheet support

    Hold-down, table stop

    Hold-down, side stop, support arms

    KMT RNC: ball transfer table, sheet return

    Angle stop (M, RNC), sheet support system, longer support arms (RNC)

    Ball transfer table, support arms, hold-down

    KHT M NC: sheet support system, angle stop

    KHT V CNC: angle stop, longer support arms, sheet support system

    Safety

    –

    Foot switch with emergency stop, cutting line light

    KMT M, RNC: finger guard, rear light curtain

    Finger guard, rear light barrier, foot switch

    Maintenance

    –

    Stroke counter (M, RNC)

    KHT V CNC: ECO mode

    Central lubrication, oil cooler

    From the field

    “Cutting 10 mm thick sheet was not possible with our old shear”
    Dennis Müller, head of training workshop, Bildungszentrum Wolfen-Bitterfeld (KHT 3010 M NC)

    FAQ's

    It shears sheet metal along a straight line. The upper blade closes against a fixed lower blade while the hold-down clamps the plate. Workshops use it to cut blanks before bending, punching or welding. The cut adds no heat to the material.

    There is none. Guillotine machine is the common name in South Africa, guillotine shear and plate shear the catalogue wording. The KNUTH design is a swing-beam shear, so the blade beam swings around a pivot. A metal guillotine cutter is the same machine again.

    Three. A treadle guillotine is worked by foot pedal or hand lever and suits thin plate and small formats. A motorised guillotine uses an electromechanical drive and holds a quick cycle. A hydraulic guillotine builds its force with cylinders and takes thick plate and wide sheets.

    When thick plate, wide sheets or steady volume are involved. Hydraulics give even force across the full cutting length and adjust more finely than a mechanical drive. For light fabrication and changing single jobs, a treadle or motorised machine is usually the better value.

    Cutting length weighs heaviest, because the frame grows with it. Plate thickness follows, since it sets the drive and the cutting force. Control level, blade material and plate support equipment add to the figure. We publish no list prices and quote on request, based on your material and formats.

    Machines are checked against European testing standards, and every machine is tested with documentation before delivery. That documentation is available on request. Which guards and safety devices a given series carries is stated in the machine documentation.

    Yes. Treadle guillotines and smaller motorised machines are easy to follow, and the shearing action stays visible. For training workshops we match machine size, operating concept and safety equipment to the teaching situation.

    The range runs from thin sheet in small formats to thick plate in wide sizes. Drive type and machine size set the limit, and the material shifts it. Stainless steel lowers the maximum thickness against mild steel. The exact figures per series are in the machine data.

    For straight cuts a guillotine is the quickest and cheapest route. Contours and cut-outs belong on a laser cutting machine or a plasma cutting machine, with plasma cheaper on thick plate. Forming rather than cutting happens on press brakes, folding machines and plate rolling machines.

    We supply new machines only, and current availability comes on request. Standard wear parts and shear blades come from stock, special parts directly from the manufacturers of the components. Each machine carries a ten year spare parts supply guarantee.

    Guillotine machines for sheet metal

    A guillotine machine shears sheet metal along a straight line. The upper blade closes against a fixed lower blade. The hold-down clamps the plate before the stroke begins. The edge comes out straight and almost free of burr, without heat input. Nothing is consumed but the blades, so running cost stays low. In most workshops the guillotine works ahead of the press brake and the welding bay. The wider family sits under Sheet Metal Processing.

    Treadle, motorised and hydraulic guillotines

    South African workshops use three drive types, and the local names differ from catalogue wording.

    Thick plate and steady volume point to a hydraulic machine. Light fabrication is well covered by a treadle or motorised guillotine.

    What drives the price of a guillotine machine

    Here is what moves the price. Cutting length weighs heaviest, because the whole frame grows with it. Plate thickness comes next, since it sets the drive and the cutting force. Then the control level, from a hand wheel back gauge through NC to CNC. Blade material, plate support and stacking equipment add to the figure. We publish no list prices, because the specification decides. Send us material and formats and you get a written quotation.

    Guillotine machine, guillotine shear or shearing machine?

    The terms all describe one machine type. Guillotine machine is what most buyers here ask for. Guillotine shear and plate shear are the words in catalogues and quotations. The KNUTH design is a swing-beam shear. Its blade beam pivots through the cut rather than dropping flat, which holds the cutting force down. A metal guillotine cutter means the same machine again.

    Cut quality, rake angle and hold-down

    Three settings decide the edge. The rake angle controls how far the plate twists as the blade travels. A flatter angle protects the edge, a steeper one lifts cutting capacity. The hold-down has to grip the plate from the first moment. Plate support and stacking systems make large sheets manageable for one operator.

    Where guillotine machines are used

    Guillotine machines cut blanks wherever plate is worked. Mining suppliers, oil and gas fabricators and heavy engineering shops are the typical users. Structural steelwork and tank fabrication follow. Materials run from mild steel and stainless to aluminium and copper alloys.

    Choosing the right size of guillotine

    Five questions lead to the answer. What thickness, and in which material, since stainless steel needs more force than mild steel. What cutting length, based on the widest sheet in the store. How much output per shift, and how clean the edge has to be. And what blades and service cost over the life of the machine. Working at the thickness limit daily means taking the next size up.

    Shear blades and wear parts

    The blades are the cutting tool and the first part to wear. Shear blades have several cutting edges and can be reground. A blunt blade leaves burr and pulls the edge over. Blades and wear parts are supplied by KNUTH.

    Safety on a guillotine machine

    Operated and maintained as intended, a guillotine machine is safe to work on. Depending on the series it carries a cut line guard, an emergency stop and rear guarding. Foot pedal or two hand release keeps hands away from the blade line. Light barriers interrupt the cut if anything reaches into the danger zone. What a given machine carries is listed in its documentation.

    Alternatives to a guillotine

    A guillotine cuts straight lines only. Contours and cut-outs need another process. Laser cutting machines follow complex outlines to tight tolerances. Plasma cutting machines work out cheaper on thick plate. Forming rather than cutting happens on folding machines and plate rolling machines. Weld preparation runs over an edge beveling machine.

    Why KNUTH

    KNUTH supplies machine tools, it does not build them. We select the series, check them and deliver them. Every machine is tested with documentation before delivery. Several drive types and machine sizes come from one supplier, and we advise which design fits your plate.

    Service, spare parts and availability

    Our regional base is Germiston near Johannesburg. Local service partners look after work on site. Common wear parts ship from stock, and special parts come directly from the manufacturers of the components. Each machine carries a ten year spare parts supply guarantee. Availability and pricing for a guillotine machine come on request.

    Request a quote

    Item No.

    You will receive price and delivery time by email. If we have questions about the equipment, we will call you first. Prefer to talk right away? +27-11-822-4610

    Only for questions about your request.
    Optional: details for a more accurate quote
    For example required equipment or workpiece.

    By submitting, you agree to the processing of your data in accordance with our privacy policy.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
    Thank you!

    We have received your request. Here is what happens next:

    1. You will shortly receive a confirmation at
    2. You will receive price and delivery time by email. If we have questions, we will call you first.
    3. No email? Please check your spam folder.

    In a hurry? Call us: +27-11-822-4610

    Something went wrong

    Please refresh the page and try submitting the form again.

    Call

    Request a Consultation

    Our advisory team will get back to you personally on the same business day. Free and without obligation. Prefer to talk right away? +27-11-822-4610

    Only for questions about your request.
    For example machine, workpiece or material.

    By submitting, you agree to the processing of your data in accordance with our privacy policy.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
    Thank you!

    We have received your request. Here is what happens next:

    1. You will shortly receive a confirmation at
    2. An advisor will call you, usually on the same business day.
    3. No email? Please check your spam folder.

    In a hurry? Call us: +27-11-822-4610

    Something went wrong

    Please refresh the page and try submitting the form again.