KHT 2506 M NC - Rigid swing beam construction with plate hold-up feature and NC control for the back gauge
NC control for quick positioning of the back gauge

NC control for quick positioning of the back gauge

With the pneumatically controlled plate hold-up fixture even thin metal sheets can be positioned with high accuracy at the back gauge

With the pneumatically controlled plate hold-up fixture even thin metal sheets can be positioned with high accuracy at the back gauge

High-quality electric components for maximum reliability

High-quality electric components for maximum reliability

KHT 2506 M NC - Rigid swing beam construction with plate hold-up feature and NC control for the back gauge
NC control for quick positioning of the back gauge
With the pneumatically controlled plate hold-up fixture even thin metal sheets can be positioned with high accuracy at the back gauge
High-quality electric components for maximum reliability

KHT 2506 M NC

SKU : 184219

The models from the KHT M NC series are built under a swing-beam design. The cutting bar is guided in a pivot bearing anchored in the machine body making cuts very straight without the risk of upper and lower blades jamming. The robust back gauge precisely positioned via the ESTUN 21 NC controller.

  • Estun E21 NC control
  • Back gauge with preloaded ball screws gauge
  • Pneumatic plate hold-up feature
  • Cutter also suitable for stainless steel
  • Adjustable angular stop
Working area
Working length 2500 mm
Throat 150 mm
Cutting angle 1,5 deg
Strokes per minute 18 H/min
Hold-down 10 positions
Hold-down capacity 15 t
Table size 2820 mm x 400 mm x 800 mm
Back Gauge
Rear stop 1000 mm
Feed speed X-axis 2280 mm/min
Front Support Arms
Number of support arms 3 positions
Length of support arms 1000 mm
Cutting Capacities
Plate thickness (max.) - 450 N/mm² 6 mm
Plate thickness(min.) - 400 N/mm² 0,6 mm
Plate thickness(max.) - 700 N/mm² 4 mm
Plate thickness(min.) - 700 N/mm² 0,6 mm
Drive capacity
Motor rating main drive 7,5 kW
Hydraulic tank volume 250 l
Measures and weights
Overall dimensions (length x width x height) 3,13 m x 1,53 m x 1,6 m
Weight 5000 kg

  • The hydraulic Swing-Beam Shears with NC-controlled back gauge combines quality, reliability and easy handling

Machine Frame

  • The machine frame is made of a stress-relieved steel weldment and features a swing-beam design
  • With this design, the cutter beam travels in a swinging movement so that the distance between upper and lower knife will be restored automatically after each cut
  • The advantages of this design are low-torsion cuts, a more reliable release of cut parts, extended knife life, and easy kerf adjustments

Material Support

  • The large work table features roller balls and a rigid adjustable angular stop for easy handling and safe plate alignment
  • Long, sturdy support arms safely hold large plates

Hydraulics

  • The entire hydraulic system is reliable, low-maintenance and easy to service
  • During the cut, hydraulically regulated hold-downs ensure steady fixation of the sheet metal plate close to the cut-line

Back Gauge

  • The back gauge system is very robust and perfectly suited for rough production environments
  • Preloaded ball screws are mounted in a protective enclosure

Equipment

  • The user-friendly ESTUN 21 NC control positions the back gauge precisely both in single cuts and within program runs
  • The machine is operated via a mobile foot pedal with emergency stop switch
  • The exact cut line is visible on the metal sheet as a shadow graph
  • Upper and lower knife suitable for stainless steel

Safety

  • The continuous finger guard can be folded down to 1000 mm for a better view on the cut line
  • Safety features are based on the latest CE regulations
  • The rear-mounted light barrier system protects the work area

NC control Estun E21S SKU:
  • Easy positioning control for plate shear back gauges
  • Positioning on one side or optionally on two sides (eliminates spindle backlash)
  • Retracting function during cutting process
  • Automatic return to home position
  • Easy backup and recovery of parameters
  • Quick homing to programmed positions
  • Programming of up to 40 programs and 25 positioning steps
  • Power-off protection
NC control Estun E21S
NC control Estun E21S SKU:
  • Easy positioning control for plate shear back gauges
  • Positioning on one side or optionally on two sides (eliminates spindle backlash)
  • Retracting function during cutting process
  • Automatic return to home position
  • Easy backup and recovery of parameters
  • Quick homing to programmed positions
  • Programming of up to 40 programs and 25 positioning steps
  • Power-off protection
Pneumatic sheet support
Pneumatic sheet support SKU:

Using the pneumatically controlled sheet metal holding device, even thin metal sheets can be positioned exactly on the backgauge

Controlled backgauge
Controlled backgauge SKU:

User-friendly NC controlled back gauge for precise single cuts or for series production

Shadow light cutting line
Shadow light cutting line SKU:

Accurate alignment using the shadow cutting line

Front support arms
Front support arms SKU:
  • 3 rigid support arms for models up to 3.200 mm working length
  • 4 ridig support arms for models with 4.000 mm working length
  • The length of the arm is 1.000 mm
Foot pedal with emergency stop switch
Foot pedal with emergency stop switch SKU:
Manual cutting gap adjustment
Manual cutting gap adjustment SKU:

Facilitates quality cutting for a wide range of plate thicknesses by adjusting the gap distance.

Full length finger guard
Full length finger guard SKU:

Full length finger guard with flip up section for better view of the cutting process

Safety system for back working area
Safety system for back working area SKU:

Light barrier for the back working area

Standard upper and lower knife for stainless steel sheets
Standard upper and lower knife for stainless steel sheets SKU:
  • The knives are suitable also for cutting stainless steel
  • The upper and lower knives have 4 cutting sides
Adjustable angle stop
Adjustable angle stop SKU:

Easy to use angle stop with clamping lever and angle scale

Operating tools
Operating tools SKU:
Operator instructions
Operator instructions SKU:

NC control Estun E21S

  • Easy positioning control for plate shear back gauges
  • Positioning on one side or optionally on two sides (eliminates spindle backlash)
  • Retracting function during cutting process
  • Automatic return to home position
  • Easy backup and recovery of parameters
  • Quick homing to programmed positions
  • Programming of up to 40 programs and 25 positioning steps
  • Power-off protection
Hydraulic oil cooler
  • Recommended for series production or when operated in high temperature enviroment
Hydraulic oil cooler SKU: 253963
Hydraulic oil cooler
  • Recommended for series production or when operated in high temperature enviroment
Automatic central lubrication SKU: 253975
Automatic central lubrication
  • This option greatly reduces maintenance time and increases the life of the machine by minimizing wear due to friction.

Resources & Downloads

Similar Products

consultation

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

KHT 2506 M NC - Rigid swing beam construction with plate hold-up feature and NC control for the back gauge
KHT 2506 M NC
SKU : 184219
*
*
*
*
*
*

*
*
*
*
*

*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

*
*
*
*
*

*
*
*

*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.