| Working area |
| Drilling capacity |
60 mm |
| Tapping capacity, steel |
M 36 |
| Table set up area |
740 mm x 520 mm |
| Quill stroke |
200 mm |
| Powered table travel |
400 mm |
| Spindle nose-to-table surface distance |
730 mm |
| Throat |
340 mm |
| Headstock |
| Speed range |
50 1/min - 2000 1/min |
| Spindle mount |
MK 5 |
| Feed |
| Quill feeds |
1 mm/R - 300 mm/R |
| Drive capacity |
| Motor rating main drive |
4 kW |
| Measures and weights |
| Overall dimensions (length x width x height) |
0,9 m x 1,2 m x 2,6 m |
| Weight |
1350 kg |
Ideal for drilling, countersinking, reaming and tapping
- The heavy box-column design ensures superior stability and rigidity, ensuring high precision and extremely low vibration when working with large drill diameters
- Base, stand, table, and gear head are made of thick-walled, vibration-damping cast iron
- The work table moves in wide dovetail guideways with large dimensions
- This design absorbs high axial and transverse forces caused by heavy-duty machining and very heavy workpieces
- A powerful motorized table height adjustment positions the table over the vertical spindle that is centered below the table
- Parallel positioned clamping slots simplify setup of workpieces on the drill table for high precision and reproducibility
- The work area of the vertical guideway is protected from chips and coolant splashes with a robust stainless steel cover
- The main spindle gears run in an oil bath, allowing for a very high torque across the entire speed range
- The automatic quill feed is controlled via a push button at the capstan handle
- The rugged LED work light with splash guard is bright, energy-efficient, and glare-free
- Manual upper fast clamping system with front clamp for Type R1 tools
- Manual central lubrication system simplifies regular maintenance
Modern operating concept with rugged touchscreen display
- The 12.1” color touchscreen conveniently displays all functions and features a rugged, resistant touch panel
- No programming skills are required for the modern, patented control system
- The infinitely variable spindle speed can be controlled at the display and is easy to read
- The control system assists the operator with the selection of the correct rpm and feed speed
- The system recommends cutting parameters based on bore diameter and material, which also may be accepted automatically
- An AC servo motor drives the automatic quill feed speed, which can be infinitely adjusted and read at the display
- The depth stop is set electronically at the display
- Upon reaching the preselected drilling depth, the quill automatically returns to the starting position
- Drilling depth positioning accuracy is about 0.10 mm
- Easy to program chip breaking function increases process safety
- Measuring units for input and display can be selected by the operator (mm or inch)
- Various alarm screens warn the operator in case of operational errors and display information on the operational state
- If the thread cutting function is enabled, the spindle rotation will automatically reverse upon reaching the set depth
- The high-performance coolant system is enabled at the touchscreen and will be turned on and off as a function of the main spindle.
- The system features an operating hour counter
Without CE mark, only for export to countries outside the EU
Standard Equipment:
- Thread cutter
- Touchscreen
- Protective shield
- LED work lights
- Coolant system
- Reduction Sleeve MT 4/2
- Reduction Sleeve MT 4/3
- Reduction Sleeve MT 3/1
- Drill chuck and tool-holder bits
- Operating tools
- Operation manual
