Basic 170 Super - Solid precision bench lathe with large center width
Micrometer bed stop ensures repeatability

Micrometer bed stop ensures repeatability

The thread gauge allows for resuming the thread after the apron nut for retrograde motion has been opened

The thread gauge allows for resuming the thread after the apron nut for retrograde motion has been opened

Basic 170 Super - Solid precision bench lathe with large center width
Micrometer bed stop ensures repeatability
The thread gauge allows for resuming the thread after the apron nut for retrograde motion has been opened

Basic 170 Super

SKU : 300815

The Basic 170 Super is a versatile lathe for single part production. Due to the large selection of optional accessories, these models are the best choice for repair, training and workshops of all kinds

  • Compact design for small footprint
  • Extensive standard equipment for a wide range of applications
  • 3-axis position indicator with turning functions
Working area
Center width 1000 mm
Turning diameter over bed 330 mm
Turning-Ø over support 198 mm
Travels
Travel X-axis 170 mm
Travel Z1-axis 95 mm
Swing range of top slide ± 360°
Headstock
Spindle speed 70 1/min - 2000 1/min
Spindle bore 38 mm
Spindle mount Camlock D1-4
Spindle taper 5 MT
Feed
Feed X-axis 0,014 mm/R - 0,38 mm/R
Feed Z-axis 0,052 mm/R - 1,392 mm/R
Threading
Threading, metric (26) 0,4-7 mm
Threading, whitworth (34) 4-56 TPI
Tailstock
Tailstock quill diameter 33 mm
Tailstock taper 3 MT
Tailstock quill stroke 100 mm
Tailstock traverse adjustment ± 10 mm
Drive capacity
Motor rating main drive 1,5 kW
Measures and weights
Overall dimensions (length x width x height) 1,83 m x 0,68 m x 1,32 m
Weight 520 kg

  • Hardened and ground headstock gears
  • Max. spindle speed 2000 rpm
  • Adjustable headstock bearing
  • Cast-iron bed, double v-guide, hardened and ground
  • Interlock to prevent simultaneous operation of lead screw and feed shaft feed
  • Oil-bath lubricated main drive and feed gear
  • Double-walled apron box with oil-bath lubrication
  • All guideways are adjustable

3-axis position indicator X.Pos 3.2 SKU:
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • The optical scales provide 5 micron resolution (0.005 mm) with outside cover from aluminum for protection against oil, coolant and chips.

Basic Functions

  • Resolution of 0,005 mm
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function

Constant cutting speed

  • Allows you to have constant cutting speed during - the spindle speed automatically adjusts based on the turning diameter
3-axis position indicator X.Pos 3.2
3-axis position indicator X.Pos 3.2 SKU:
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • The optical scales provide 5 micron resolution (0.005 mm) with outside cover from aluminum for protection against oil, coolant and chips.

Basic Functions

  • Resolution of 0,005 mm
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function

Constant cutting speed

  • Allows you to have constant cutting speed during - the spindle speed automatically adjusts based on the turning diameter
Quick change tool holder head WE
Quick change tool holder head WE SKU:

High quality German type quick change tool holder to easily switch the tools with a repeat accuracy of 0,01 mm.

Quick change tool holder WED 20100
Quick change tool holder WED 20100 SKU:
  • Tool holder WED 20100
  • Side 20×100 mm
3-jaw chuck Ø 160 mm
3-jaw chuck Ø 160 mm SKU:
  • self-centering 3 jaw chuck
  • size of Ø 160 mm
  • made of cast iron
  • delivered with one set of hard jaws
4-jaw face plate chuck Ø 200 mm
4-jaw face plate chuck Ø 200 mm SKU:
  • independent4 jaw chuck 
  • size of Ø 200 mm
  • made of cast iron
  • delivered with one set of hard jaws
Face plate Ø 280 mm
Face plate Ø 280 mm SKU:

Face plate diam. Ø280 mm

Steady and follow rests
Steady and follow rests SKU:
  • Steady rest - max. workpiece diameter: Ø70 mm
  • Follow rest - max. workpiece diameter: Ø60 mm
Micrometer stop
Micrometer stop SKU:

Increases the precision of operations and reduces downtimes spent for part measuring.

Thread gauge
Thread gauge SKU:
Reducing sleeve
Reducing sleeve SKU:
Dead center
Dead center SKU:
Protective shield for the toolpost
Protective shield for the toolpost SKU:
Chuck guard
Chuck guard SKU:

Chuck guard with integrated interlock system

Foot brake pedal
Foot brake pedal SKU:

Emergency foot brake pedal

Fixed splash guard (wall)
Fixed splash guard (wall) SKU:
Work light
Work light SKU:
Chip tray
Chip tray SKU:
Toolbox with operating tools
Toolbox with operating tools SKU:
Operator instructions
Operator instructions SKU:

3-axis position indicator X.Pos 3.2

  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • The optical scales provide 5 micron resolution (0.005 mm) with outside cover from aluminum for protection against oil, coolant and chips.

Basic Functions

  • Resolution of 0,005 mm
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function

Constant cutting speed

  • Allows you to have constant cutting speed during - the spindle speed automatically adjusts based on the turning diameter

Resources & Downloads

Optional Accessories

Explore the range of compatible accessories in stock

Chucks and Accessories 4-jaw chuck 160mm D1-4 (steel)
SKU : 116600
Lathe Tools and Accessories Replacem. 12/16/20 mm 5pc / Clamping Turning Tool
SKU : 108775
Lathe Tool Post Tool Holder WED 20x100
SKU : 103281
Lathe Tool Post Tool Holder WED 25x100
SKU : 103282
Lathe Tool Post Tool Holder WEH 30x100
SKU : 103283
Lathe Tool Post Tool Holder WEJ 40x100
SKU : 103285
Lathe Tool Post Cut-off insert holder WEA-A2a
SKU : 103286
Milling & Drilling Adapters Reduction Sleeve MT 3/1
SKU : 103810
Milling & Drilling Adapters Reduction Sleeve MT 3/2
SKU : 103815
Milling & Drilling Adapters Extension Sleeve MT 3/4
SKU : 104665
Drill Chucks Tool Holder Bit MT 3 / B 16
SKU : 104739
Drill Chucks Tool Holder Bit MT 3 / B 18
SKU : 104740
Drill Chucks Keyless Drill Chuck 1-13 mm B 16
SKU : 104765
Drill Chucks Keyless Drill Chuck 3-16 mm B 18
SKU : 104770
Micrometers Digital Micrometer Calipers 0 - 100 mm
SKU : 108365
Lathe Tools and Accessories Knurl Holder
SKU : 108520
Lathe Tools and Accessories Knurl Set, angles
SKU : 108521
Chucks and Accessories Soft Jaw Pads for 3-jaw chuck 160mm
SKU : 116550
Chucks and Accessories Soft Jaw Pads for 3-jaw chuck 200mm
SKU : 116551
Chucks and Accessories 4-jaw chuck 200mm D1-4 (steel)
SKU : 116601
Chucks and Accessories Soft Jaw Pads for 4-jaw chuck 160mm
SKU : 116650
Chucks and Accessories Soft Jaw Pads for 4-jaw chuck 200mm
SKU : 116651
Chucks and Accessories 4-jaw independent chuck 200mm D1-4
SKU : 116670
Chucks and Accessories soft top jaws for 4-jaw- chuck 200mm
SKU : 116690
Chucks and Accessories 3-jaw chuck 200mm D1-4 (steel)
SKU : 116501
Chucks and Accessories 3-Jaw Lathe Chuck 160 mm D 1-4 (steel)
SKU : 146378
Oil, Coolants and Lubricants Coolant System
SKU : 102986
Oil, Coolants and Lubricants Coolant Concentrate 5 Ltr.
SKU : 103184
Lathe Tools and Accessories Live Centers MT 3
SKU : 106750
Lathe Tools and Accessories Live center set, MT3
SKU : 106785
Chip Removal Power Worker Metal Cutter
SKU : 123040
Lathes accessories Quick-Set Spindle Bore Stop Size 4 30-38mm
SKU : 103016
Installation, Assembly Pivoted Mounts LK 3
SKU : 103330
Drill Chucks Accessory Set for Drilling MT3, 7-pc
SKU : 104593
Micrometers Measuring Tool Set M5
SKU : 108344
Lathe Tools and Accessories Turning Tool Set 8 pcs., 20 mm
SKU : 108700
Dial Indicators Mechanical Clamping (Clamping: 3 in 1)
SKU : 108796
Chucks and Accessories 3-jaw chuck 160mm D1-4 (cast iron)
SKU : 116520
Chucks and Accessories 4-Jaw Lathe Chuck Cast Iron 160 mm
SKU : 116620
Chucks and Accessories 4-Jaw Lathe Chuck Cast Iron 200 mm
SKU : 116622
Dial Indicators Dial digital 0-12.7 mm
SKU : 127011
Dial Indicators Dial Holder
SKU : 127422
Oil, Coolants and Lubricants Coolant system 13 l (plastic tank)
SKU : 102987
consultation

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

Basic 170 Super - Solid precision bench lathe with large center width
Basic 170 Super
SKU : 300815
*
*
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Explore more machines Book a demo for this machine
Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a service

*
*
*
*
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our service representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.