Water-Jet B 2010 - 3 axis bridge type design with Beckhoff CNC controller and integrated CAM software Contronest
Totally enclosed moving units to protect against ingress of water and dust

Totally enclosed moving units to protect against ingress of water and dust

Cutter head and abrasives system are optimally adapted for the high-pressure systemBFT high-pressure pump with ALLFI cutter head and abrasives system (shown)KMT high-pressure pump with ACTIVE IDEII/PRO and KMT FEEDLINE

Cutter head and abrasives system are optimally adapted for the high-pressure systemBFT high-pressure pump with ALLFI cutter head and abrasives system (shown)KMT high-pressure pump with ACTIVE IDEII/PRO and KMT FEEDLINE

Water-Jet B 2010 - 3 axis bridge type design with Beckhoff CNC controller and integrated CAM software Contronest
Totally enclosed moving units to protect against ingress of water and dust
Cutter head and abrasives system are optimally adapted for the high-pressure systemBFT high-pressure pump with ALLFI cutter head and abrasives system (shown)KMT high-pressure pump with ACTIVE IDEII/PRO and KMT FEEDLINE

Water-Jet B 2010

SKU : 166740

The machines of the Water-Jet B series cover a wide range of cutting areas. The cutting systems are designed in a portal design with a gantry drive. Depending on requirements and application, Water-Jet systems can be offered with additional equipment options. The modern control from Beckhoff with Panasonic drives and the CAM software Contranest is easy to operate and together with the economical pressure intensifier pump from the renowned manufacturer BFT, opens up new perspectives in terms of performance and price.

Working Area
Cutting range 81 in x 41 in
Table load capacity 307 lbs/ft²
Travels
Travel Z-axis 8 in
Cutting length / Travel Y-axis 41 in
Cutting width / Travel X-axis 81 in
Rapid Feed
Rapid feed X-, Y-, Z- axis 787 in/min
Feed
Work feed 0 in/min - 787 in/min
Accuracies
Positioning accuracies ± 0.0024 in
Repeatability ± 0002 in
Measures and Weights
Overall dimensions (length x width x height)-height 136 in x 79 in x 95 in
Weight without water 5324 lbs

  • Very rigid dual-drive machine bridge
  • Rigid frame construction (sides are made of stress-free annealed and milled monoblocks, which are fastened with pins during machine setup)
  • High-quality linear guides on all axes
  • Ground and hardened helical gears on Y- and X- axes, plus high-quality preloaded ball screws on Z- axis
  • Servo-motor drive on X- / Y- / Z- axis
  • Electronically monitored central lubrication system
  • Stand-alone cutting table with high load capacity
  • Exchangeable support grid with galvanized (standard) or stainless steel (option) slats
  • The standard laser pointer simplifies workpiece alignment on the support table for optimized sheet metal utilization
  • The abrasive sand is held in a 551 lbs storage container and transferred automatically via air pressure to a dosing unit

Control BECKHOFF CX5130

  • The CX5130 has an Intel Atom® multicore processor with 1.75 GHz, real multi-core technology in the segment of compact embedded PCs
  • Two independent, Gigabit-capable Ethernet interfaces as well as four USB 2.0 and one DVI-I interfaces are available
  • The CX5130 is characterized by low power consumption and no fan
  • Powerful Contronest drives round out the powerful and reliable control package

ControNest CAM-Software

  • Easy to operate CAM software
  • ControNest was specially developed for cutting machines
  • The software includes an embedded CAM module, with which CAD drawings, nesting and material databases can be imported, which means no expensive additional CAM software is required

Separate cutting table SKU:
Separate cutting table
Separate cutting table SKU:
Support grid with galvanized slats
Support grid with galvanized slats SKU:
CONTRONEST CNC Control
CONTRONEST CNC Control SKU:
Laser pointer
Laser pointer SKU:
Abrasive tank 551 lbs
Abrasive tank 551 lbs SKU:
Swiveling control panel attached to the machine
Swiveling control panel attached to the machine SKU:
Electronic hand-wheel
Electronic hand-wheel SKU:
Operating manual and programming instructions
Operating manual and programming instructions SKU:
KMT Streamline SL VI, High pressure pump 3800 bar, 50HP

KMT Waterjet STREAMLINE SL-VI systems feature the latest technologies and a highly intelligent design to ensure simplified use, high reliability and user comfort.

  • The result is a highly efficient system for maximum profitability.
  • KMT STREAMLINE SL-VI water-jet pumps with 4,137 bar/60,000 psi are available in various power categories and configurations.
KMT Streamline SL VI, High pressure pump 3800 bar, 50HP SKU: 253565
KMT Streamline SL VI, High pressure pump 3800 bar, 50HP

KMT Waterjet STREAMLINE SL-VI systems feature the latest technologies and a highly intelligent design to ensure simplified use, high reliability and user comfort.

  • The result is a highly efficient system for maximum profitability.
  • KMT STREAMLINE SL-VI water-jet pumps with 4,137 bar/60,000 psi are available in various power categories and configurations.
KMT Streamline VI 60S PRO-3 High pressure pump, 90,000 psi SKU: 253566
KMT Streamline VI 60S PRO-3 High pressure pump, 90,000 psi

The 90,000 psi high-pressure pump offers the following advantages over conventional 4,100 bar water-jet cutting:

  • Higher cutting speeds
  • Improved cut edge quality
  • Reduced abrasives consumption
  • Increased productivity
  • Increased angular precision
  • Less delamination

Advantages of the PRO-III pressure booster:

  • The optimized design of SUPRALIFE high-pressure seals ensures a longer tool life
  • Patented pressure booster construction
  • Advanced heat treatment of seal head body
  • Outlet check valve made of titanium
  • Cylinder bushings made of stainless steel
  • Highly polished piston
Water-Jet height control with collision safety SKU: 252580
Water-Jet height control with collision safety
Hydro-Jet light curtains for safety on 4 sides SKU: 253576
Hydro-Jet light curtains for safety on 4 sides
Water-jet splatter guard SKU: 252988
Water-jet splatter guard
Water-Jet Drilling head SKU: 253577
Water-Jet Drilling head
Water quality stabilization system with contact water meter SKU: 253709
Water quality stabilization system with contact water meter
Refrigerated compressed air dryers SKU: 251090
Refrigerated compressed air dryers
  • Dew point +3°C
  • Max. working pressure: 16 bar
  • Flow rate: 0,88 m3/min
  • Connection: 1/2"
  • Dimensions (LxWxH): 16.26x14.37x21.93"
  • Including first and second stage filters
Water-Jet Option Increase Z axis travel to 16 in SKU: 252991
Water-Jet Option Increase Z axis travel to 16 in
Water-Jet 2010 stainless steel cutting table and tank SKU: 252589
Water-Jet 2010 stainless steel cutting table and tank
Water-Jet 2010 mechanical upgrade for increased accuracy SKU: 253568
Water-Jet 2010 mechanical upgrade for increased accuracy
Water-Jet 2010 water level control SKU: 252581
Water-Jet 2010 water level control
Secondary cutting head (CNC) for same BFT pump SKU: 253602
Secondary cutting head (CNC) for same BFT pump
Abrasives tank (2205 lbs) SKU: 253654
Abrasives tank (2205 lbs)
  • Water level control - semi-automatic
  • Return via an overflow system
  • Feed via membrane pump - manually adjustable
Igems Data exchange SKU: 252155
Igems Data exchange
Igems Sign Maker SKU: 251449
Igems Sign Maker
Igems Tile Maker SKU: 251450
Igems Tile Maker
Igems optical Locator SKU: 252156
Igems optical Locator
Igems Organizer SKU: 251451
Igems Organizer
Igems Floating License SKU: 251453
Igems Floating License
High pressure pump BFT Servotron 40.37 SKU: 251225
High pressure pump BFT Servotron 40.37

No power consumption while jet is closed

  • Approximately 15% more energy effient than asynchronous motors
  • Soft start upon high-pressure pump startup and reduced power consumption
  • Infinitely variable pressure from 1,450 to 58,000 psi for a wider spectrum of applications
  • Virtually no pulsation during jet startup - no chipping of brittle materials
  • Minimal pressure fluctuations of only ± 1% at full load - increased life of high-pressure components and improved cut quality
  • No overshoots and minimal pressure inrush when turning the water-jet on and off - protects the entire high-pressure system all the way to the cutter head

Resources & Downloads

  • Water-Jet B 2010 Brochure.pdf (0.76MB)

Optional Accessories

Explore the range of compatible accessories in stock

Water Cutting Consumables Starter set BFT 40.30/40.37
SKU : 166213

Similar Products

Water-Jet B 3080 - 3 axis bridge type design with Beckhoff CNC controller and integrated CAM software Contronest

Water-Jet B 3080

Cutting range: 120x317 in
Table load capacity: 307 lbs/ft²
Water-Jet B 3015 - 3 axis bridge type design with Beckhoff CNC controller and integrated CAM software Contronest

Water-Jet B 3015

Cutting range: 120x61 in
Table load capacity: 307 lbs/ft²
Water-Jet B 3020 - 3 axis bridge type design with Beckhoff CNC controller and integrated CAM software Contronest

Water-Jet B 3020

Cutting range: 120x81 in
Table load capacity: 307 lbs/ft²
Water-Jet B 2040 - 3 axis bridge type design with Beckhoff CNC controller and integrated CAM software Contronest

Water-Jet B 2040

Cutting range: 81x159 in
Table load capacity: 307 lbs/ft²
Water-Jet B 2060 - 3 axis bridge type design with Beckhoff CNC controller and integrated CAM software Contronest

Water-Jet B 2060

Cutting range: 81x238 in
Table load capacity: 307 lbs/ft²
Water-Jet B 3040 - 3 axis bridge type design with Beckhoff CNC controller and integrated CAM software Contronest

Water-Jet B 3040

Cutting range: 120x159 in
Table load capacity: 307 lbs/ft²
Water-Jet B 3060 - 3 axis bridge type design with Beckhoff CNC controller and integrated CAM software Contronest

Water-Jet B 3060

Cutting range: 120x238 in
Table load capacity: 307 lbs/ft²

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

Water-Jet B 2010 - 3 axis bridge type design with Beckhoff CNC controller and integrated CAM software Contronest
Water-Jet B 2010
SKU : 166740
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Explore more machines Book a demo for this machine
Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.